Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO Access Point (UAP-AC-PRO-US), Single,White (Pack of 2)
Bottom line: The Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO Access Point ($328.95 on Amazon as of 2026-10-22 02:15 UTC): Simultaneous 2.4GHz and 5GHz radios on 802.11ac; main trade-off: 802.11ac (Wi-Fi 5) only, no Wi-Fi 6 or 6E support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-22. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Simultaneous 2.4GHz and 5GHz radios on 802.11ac
- ✓ Rated up to 1300 Mbps on 5GHz and 450 Mbps on 2.4GHz
- ✓ PoE powered: one Ethernet run carries both data and power
- ✓ Central setup, monitoring and guest networks in UniFi Controller
- ✓ Two units in the pack for multi-room or multi-floor coverage
Cons
- ✗ 802.11ac (Wi-Fi 5) only, no Wi-Fi 6 or 6E support
- ✗ Full configuration depends on running the UniFi Controller software
- ✗ Needs a PoE source; check the listing for included power adapters
- ✗ Rated speeds are theoretical maximums; real-world throughput runs lower
Manufacturer description
The Ubiquiti UniFi UAP-AC-PRO is a dual-radio 802.11ac access point, and this pack includes two units so you can cover a larger home, office or multi-floor space. Both radios run at the same time. The 5GHz band is rated for up to 1300 Mbps, and the 2.4GHz band for up to 450 Mbps, so newer devices can use the faster band while older ones stay on 2.4GHz. Each access point runs on Power over Ethernet. A single cable carries both data and power, so you don't need an outlet near a ceiling or wall mount. That makes it practical to put the units where coverage matters, such as a hallway ceiling, an…
SpecPicks Verdict
SpecPicks scored Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO Access Point using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. Ubiquiti Networks's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How fast is the Ubiquiti UAP-AC-PRO?
It is rated for up to 1300 Mbps on the 5GHz band and up to 450 Mbps on the 2.4GHz band, and both radios run at the same time. Real-world speeds depend on client devices, distance and interference.
Do I need to run a power cable to each access point?
No. The UAP-AC-PRO runs on Power over Ethernet, so one Ethernet cable carries both data and power. You need a PoE-capable switch or injector. Check the product listing to see whether PoE adapters are included in this 2-pack.
Does the UAP-AC-PRO support Wi-Fi 6?
No. It is a dual-radio 802.11ac (Wi-Fi 5) access point. Wi-Fi 6 devices will still connect, but at 802.11ac speeds rather than Wi-Fi 6 rates.
How do I set up and manage the two access points?
Both units work with the Ubiquiti UniFi Controller. There you can configure them, monitor connected devices, set up guest networks and add more UniFi hardware as your network grows.
What warranty comes with the UniFi UAP-AC-PRO 2-pack?
The product details here do not state warranty terms. Check the product listing or Ubiquiti's support site for current warranty coverage before you buy.
Key Features
- Dual-Radio 802.11ac Performance: Powered by Ubiquiti Networks technology, delivers simultaneous 2.4GHz & 5GHz bands for high-speed wireless coverage and improved device handling.
- Gigabit Throughput & Range: Supports up to 1300 Mbps on 5GHz and 450 Mbps on 2.4GHz, ideal for offices, homes, and high-density environments requiring stable connectivity.
- Seamless PoE Deployment: Includes Power over Ethernet (PoE) support for flexible installation without additional power cables, simplifying setup in ceilings or walls.
- Centralized UniFi Management: Fully compatible with UniFi Controller for easy configuration, monitoring, guest network setup, and scalable wireless management.
- 2-Pack Value & Sleek Design: Comes in a convenient pack of two with a clean white finish, perfect for expanding coverage while maintaining a professional, low-profile look.
Full Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Color | black |
| Coverage | Up to 400 feet |
| Frequency | 5 GHz |
| Model Name | UAP-AC-PRO |
| Unit Count | 2 Count |
| Antenna Type | Internal |
| Connectivity | Wireless, 2.4GHz |
| Model Number | UAP-AC-PROx2 |
| Built-In Media | 2 x Ubiquiti UAP-AC-PRO Access Points |
| Control Method | Remote |
| Connection Type | Wireless |
| Controller Type | Software |
| Mfr Part Number | UAP-AC-PROx2 |
| Number of Ports | 2 |
| Special Feature | Access Point Mode, WPS |
| Antenna Location | Home |
| Security Protocol | WPS |
| Compatible Devices | Personal Computer |
| Connectivity Range | 125663 square_feet |
Ready to buy?
Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO Access Point (UAP-AC-PRO-US), Single,White (Pack of 2) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-22. Price and availability subject to change.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen AI Max 395 Laptop: Specs and AI Performance
- Zhipu ZCode vs Claude Code: Cheaper Agentic Coding, and the Rig to Run It
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD
- Jellyfin vs Plex on a Raspberry Pi 4 (8GB) in 2026: Transcoding, Power Draw, and Which to Self-Host
- Best Budget PC Upgrades Under $250 in 2026
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Best CPU Coolers for AMD Ryzen 5000 (AM4) in 2026
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 3090
- Best CPU for Streaming and Gaming Under $300 (2026)
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- CPU Cooler Bracket Fix: How to Secure Your CPU When It Fails
- Raspberry Pi 4 8GB vs Pi 5 vs Pi Zero W for a 2026 Homelab
- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- Gemma 4 12B Fits Multimodal AI Into 16GB of RAM
- Horse Riding Game Controller for PC/Mac: Buy or Build
- Voodoo3 3000 vs GeForce 256: 1999 Glide vs OpenGL Showdown
- RTX 3060 12GB vs Intel Arc B580 for Stable Diffusion
- Can You Run Local TTS on an RTX 3060 12GB in 2026?
- GTX 1050 Ti 4GB vs Raspberry Pi 4 8GB for Qwen3 1.7B Local Inference
- Best Cheap Raspberry Pi Alternatives in 2025
- Best Budget FPS Mouse + Pad Combo: G502 Hero & QcK 2026
- Self-Host Jellyfin and Home Assistant on a Raspberry Pi 4 8GB in 2026
- Best Controller for Steam Deck Docked Mode in 2026
- Apple Intelligence Gets a Second Shot With Google and Nvidia Help
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090