10Gtek
10Gtek 10GBase-SR SFP+ LC Transceiver
Bottom line: The 10Gtek 10GBase-SR SFP+ LC Transceiver: Ten 10GBase-SR modules per pack, enough to fiber up a switch, servers and a NAS; main trade-off: multimode only; will not link to single-mode fiber or LR optics.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Ten 10GBase-SR modules per pack, enough to fiber up a switch, servers and a NAS
- ✓ 850nm multimode reach up to 300m over duplex LC
- ✓ Works with OM1, OM2, OM3 and OM4 fiber (62.5um and 50um cores)
- ✓ Coded for Cisco, Meraki, UniFi, Fortinet, Mikrotik, Netgear and Supermicro gear
- ✓ Under 1.05W per module, hot-pluggable, DDM support, 3-year warranty
Cons
- ✗ Multimode only; will not link to single-mode fiber or LR optics
- ✗ 300m max reach; longer runs need single-mode modules instead
- ✗ Rated 0C to 70C, a commercial range rather than industrial
- ✗ LC patch cables not included; fiber must be bought separately
Manufacturer description
The 10Gtek 10GBase-SR SFP+ transceiver 10-pack gives you ten 850nm multimode optics for 10 Gigabit Ethernet links. That's enough to connect a core switch, a few servers and a NAS in one order. Each module has a duplex LC connector and reaches up to 300 meters. It works with OM1, OM2, OM3 and OM4 multimode patch cables, in both 62.5um and 50um core sizes, so you can usually reuse the fiber you already have. Compatibility is broad. 10Gtek lists Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro and TP-Link, along with other open…
SpecPicks Verdict
SpecPicks scored 10Gtek 10GBase-SR SFP+ LC Transceiver using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. 10Gtek's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these 10Gtek SFP+ modules work in my Ubiquiti UniFi switch?
10Gtek lists compatibility with Ubiquiti UniFi UF-MM-10G, so they are meant to be drop-in replacements for UniFi's own 10G multimode optic in UniFi SFP+ ports.
What fiber cable do I need with these transceivers?
Use a duplex LC-to-LC multimode patch cable. The modules support OM1, OM2, OM3 and OM4 fiber with either 62.5um or 50um cores. Single-mode (OS1/OS2) cable is not supported.
How far can a 10GBase-SR link run with these modules?
Up to 300 meters at 850nm over multimode fiber. For longer distances you need a single-mode 10GBase-LR optic and single-mode fiber instead.
Can I hot-swap these SFP+ modules without powering down the switch?
Yes. The modules are fully hot-pluggable with ESD protection, so you can insert or remove them while the switch, server or NIC is running.
What warranty comes with the 10-pack?
10Gtek includes a 3-year warranty and lifetime tech support. Each of the ten modules is tested before shipping. See the product listing for claim details.
Key Features
- 10GBASE-SR SFP+ to LC Optical 10 Gigabit Ethernet Fiber transceiver module, 10GbE Multimode SFP+(compatible with both 62.5um and 50um LC cables; supports OM1/OM2/OM3/OM4 fiber cables), Duplex LC connector, 850nm, DDM, up to 300m.
- [Wide Compatibility] Compatible with Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, TP-Link and Other Open Switches.
- [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in network switch, server, or NIC with SFP+ to a 10 Gigabit fiber channel network with multimode LC for Network Attached Storage(NAS), Storage Area Network(SAN), and High Performance Computing(HPC) applications.
- [Durable & Low Power Consumption] Adpot high quality alloy, the shell is strong and wear-resistant; Low power consumption(less than 1.05watt) and low EMI emission design. SFP MSA Compliant, IEEE 802.3ae Compliant. Operating Temperature: 0°C to 70°C.
- [What you Get] 10x 100% tested 10GBase-SR modules, 3-Year warranty and lifetime tech support. 10Gtek is a manufacturer of transceiver, customized service is available.
Full Specifications
| Brand | 10Gtek |
|---|---|
| Weight | 10g |
| Compatibility | Switch |
| Full listing title | 10Gtek 10GBase-SR SFP+ LC Transceiver, 10G 850nm Multimode SFP Module, up to 300 Meters, for Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik and More, Pack of 10 |
Ready to buy?
10Gtek 10GBase-SR SFP+ LC Transceiver, 10G 850nm Multimode SFP Module, up to 300 Meters, for Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik and More, Pack of 10 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Claude Fable 5 Tops the Intelligence Index: What Frontier Cloud AI Means for Local Rig Builders
- OpenAI Codex Now Encrypts Agent-to-Agent Instructions: The Case for Local, Auditable Agents
- DIY Open-Source Photo Frame: Pi Zero 2 W + Immich
- Mistral 7B vs Mistral Small 24B: GPU Requirements Compared
- Best PC Cooling for High-TDP Builds in 2026
- Why Preassembled PCs Beat DIY Builds in 2026
- Best PC Gaming Gear for Console Players Making the Switch in 2026
- Best GPU for Local Stable Diffusion at 1080p/1440p in 2026
- RTX 5070 Ti vs RTX 5080: Is the $400 Step-Up Worth It at 1440p and 4K?
- Build a DualSense PC Dongle with a Raspberry Pi Pico: Adaptive Triggers and Haptics on Windows
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- Best Gaming Mouse for FPS Esports Under $80 (2026)
- How to run Qwen 3 32B on NVIDIA GeForce RTX 4090
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Best Budget Gaming Monitors Under $300 for 1080p in 2026
- CRT vs LCD for Retro Gaming: Which Wins in 2026?
- Intel Arc GPU for Stable Diffusion: Setup & Benchmarks
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- AMD Ryzen Buying Guide 2026: Every Tier Compared
- Best GPU for a Homelab in 2026: AI, VMs & Budget Picks
- Best Microphone for Streaming and Podcasting Under $200 in 2026
- Best 2.5" SATA SSD to Upgrade a PS4 Pro in 2026
- Best Parts for a Local LoRA Fine-Tuning Workstation in 2026
- IPEX-LLM + Ollama in Docker: Running Local Models on Intel GPUs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090