Gowoops
5 PCS of GPIO Ribbon Cable Flat Wire 20cm 40pin for Raspberry Pi 3 2 Model B B+ Plus
Bottom line: The Gowoops 5 PCS of GPIO Ribbon Cable Flat Wire 20cm 40pin ($14.99 on Amazon as of 2026-10-06): Standard 2.54mm pitch 40-pin IDC fits Pi 3, Pi 2 and Model B+ headers; main trade-off: cable only, no Raspberry Pi or breakout board included.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Standard 2.54mm pitch 40-pin IDC fits Pi 3, Pi 2 and Model B+ headers
- ✓ 20cm / 8in length lifts HATs and breakouts clear of the Pi board
- ✓ Rated to 300V and 105C, so it tolerates warm enclosure runs
Cons
- ✗ Cable only, no Raspberry Pi or breakout board included
- ✗ Female IDC on both ends, so it won't mate with female breakout headers
- ✗ 28AWG conductors are thin for anything beyond signal and light 5V loads
- ✗ 51mm ribbon width is bulky inside slim or low-profile Pi cases
Manufacturer description
Features:Product Name:Flat Ribbon CableConnector Type:Female IDC ConnectorsWithstand Voltage:300VTemperature:105CPin Number:40 PinPin Pitch:2.54mmWire Range:28AWGLength:20cm / 8"Width:51mm / 2"Materials:PlasticNet Weight:54gNote: ribbon cable ONLY, it does not come with a Raspberry Pi 2 Model BPackage include:5 x 40 Pin GPIO Flat Ribbon Cable
SpecPicks Verdict
SpecPicks scored Gowoops 5 PCS of GPIO Ribbon Cable Flat Wire 20cm 40pin using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Gowoops's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- This 40 Pin Ribbon Cable is specially designed for the Raspberry Pi.
- You can easily connect it to the low-level peripherals!
- Allows to extend standard IDC 40-Pin Cable and can also be used for additional applications.
- Connector Type: Female IDC Connectors, Pin Pitch: 2.54mm, Length: 20cm / 8", Width: 51mm / 2", Wire Range: 28AWG
Full Specifications
| Brand | Gowoops |
|---|---|
| Model | LYSB01H53OK5U-ELECTRNCS |
| Material | Copper, Plastic |
| Cable Type | Flat Ribbon |
| Part Number | EACW100200 |
| Material Type | Copper, Plastic |
| Wire Diameter | 0.32 Millimeters |
| Connector Type | Female Idc Connectors |
Ready to buy?
5 PCS of GPIO Ribbon Cable Flat Wire 20cm 40pin for Raspberry Pi 3 2 Model B B+ Plus is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- RTX 4080M Desktop Build: 100W Gaming vs. RX 9070 GRE
- Running a Local Coding Agent on an RTX 3060 12GB: Qwen3-Coder in Practice
- Sound BlasterX G6 for Retro PC Gaming Audio: An External Card for Win98/XP and DOSBox Builds
- Best 4K Gaming Monitor Under $700 in 2026
- 48GB DDR5 or 12GB VRAM? What Actually Speeds Up Local LLMs
- Putting a Modern SATA SSD in a Win98/XP Retro Build via an IDE Bridge
- Best Raspberry Pi Heatsink and Cooling Kits for Pi 5 in 2026
- Steam Deck: Linux's Trojan Horse for PC Gamers
- Best Raspberry Pi Projects for Beginners in 2026
- Best 1440p Monitor for an RTX 3060: Matching Panel to GPU
- Ryzen 5 5600X vs Ryzen 7 5800X: CPU-Only Qwen2.5 14B (2026)
- Build a Raspberry Pi Zero W Retro Emulation Handheld in 2026
- Self-Host Jellyfin and Home Assistant on a Raspberry Pi 4 8GB in 2026
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- Running Gemma 4 31B Finetunes Locally: Dual RTX 3060 12GB vs Single 24GB Card
- How to run Llama 3.1 70B on Apple M4 Pro
- A 2007 Samsung UMPC Becomes a Wii U Gamepad
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Best Gaming Gifts Under $60 in 2026
- STEPLA-1 8-Bit Hardwired CPU: 74-Series Logic Explained
- Best Wireless Keyboard for Office and Hybrid Work in 2026
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
- Best Controller for Steam Deck Docked Mode in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090