Maker hart JUST MIXER Audio/DJ Mixer
Bottom line: The Maker hart JUST MIXER Audio/DJ Mixer: 3 stereo 3.5mm channels accept up to 5 mono inputs in a pocket-size unit; main trade-off: only 3.5mm jacks; no XLR or 1/4-inch pro connectors.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 3 stereo 3.5mm channels accept up to 5 mono inputs in a pocket-size unit
- ✓ Runs on battery or USB power for truly portable mixing anywhere
- ✓ Overexertion LEDs flag clipping so you can dial in clean levels
- ✓ Gain control handles mic-level through line-level sources
- ✓ Stereo headphone monitoring plus a sub-mixer output
Cons
- ✗ Only 3.5mm jacks; no XLR or 1/4-inch pro connectors
- ✗ No built-in EQ, faders, or onboard effects
- ✗ Mic inputs need a sensitive mic; gain can run low
- ✗ Single stereo output limits routing for bigger setups
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Maker hart JUST MIXER Audio/DJ Mixer, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "3 stereo 3.5mm channels accept up to 5 mono inputs in a pocket-size unit"; the main trade-off is "Only 3.5mm jacks; no XLR or 1/4-inch pro connectors". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Versatile and compact – the perfect way to various sound sources to mix whenever you want and wherever you are.
- Stereo configuration 3 inputs / 1 output – 3 stereo channels 3.5 mm/1/8" allows up to 5 mono input ports.
- Signal level – The gain control enables the input of devices of microphone levels to line (the you use a sensitive microphone is recommended).
- Overexertion indicator – LEDs light up when the signal console overexerts the capacity of the mixer; control for optimal audio performance.
- Mix monitoring – combination of stereo headphones for stereo monitoring and leave a sub mixer.
Full Specifications
| Brand | Maker hart |
|---|---|
| Unit Count | 1 Count |
| Audio Input | Auxiliary |
| Noise Level | 20 db |
| Connectivity | USB |
| Model Number | 85U06R01R0 |
| Power Source | Usb Cable,Corded Electric,Battery Powered |
| Compatibility | Switch |
| Number of Channels | 3 |
| Output Connector Type | 3.5mm headphone jack |
| Connectivity Technology | Auxiliary, USB |
| Manufacturer Part Number | 85U06R01R0-Orange |
| Item Dimensions D x W x H | 2.7"D x 4.1"W x 1.18"H |
| Full listing title | JUST MIXER Audio/DJ Mixer - Battery/USB Powered Portable Pocket Audio Mixer w/ 3 Stereo Channels (3.5mm) Plus On/Off Switch (Orange) |
Ready to buy?
JUST MIXER Audio/DJ Mixer - Battery/USB Powered Portable Pocket Audio Mixer w/ 3 Stereo Channels (3.5mm) Plus On/Off Switch (Orange) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Transcend CF133 CompactFlash as a Retro PC Boot Drive: Setup + Gotchas
- Intel Core Ultra 7 270K Plus: Dual-Channel Memory Scaling Tested
- Llama 3.2 3B: Raspberry Pi 4 8GB vs RTX 3060 12GB for Local Inference
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- Microsoft Signals 32GB RAM as the Windows 11 Gaming Baseline
- Linux Gaming Keeps Closing the Gap: What the Latest Kernel Work Means
- Streamer PC Specs Decoded: The 2026 Parts That Match
- Best GPU for Qwen 3 14B (2026)
- Dual RTX 3090 vs RTX 5090: Gaming vs AI Training
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- Steam Deck: Linux's Trojan Horse for PC Gamers
- Best Mouse and Mousepad for FPS in 2026: G502 Hero + SteelSeries QcK
- Raspberry Pi 500 Plus: The Real Lineup vs. the Rumors
- Ryzen 5 5600G vs Ryzen 7 5700X for a 2026 Home Lab
- Qwen 3.6 27B GGUF: BF16 vs Q4_K_M vs Q8_0 Compared
- Lemonade v10.5.1: an MTP + ROCm 7.13 quick start for Strix Halo
- Ryzen 9 3900X vs Ryzen 5 5600G for CPU-Only Local LLM Inference (2026)
- Microsoft Now Points to 32GB RAM for Windows 11 Gaming — What It Means for Your Build
- LLM-Driven Driver Install on Windows 98: How Claude Walks Voodoo + Sound Blaster Setup
- Retro Console Mods UK: Legal Rules & 2025 Options
- Noctua NH-U12S vs MasterLiquid ML240L for a Ryzen 7 5800X
- GeForce 4 Ti 4600 vs GeForce FX 5900: The Last Great AGP Cards Compared (2026)
- Which Ryzen CPU Is Better? 2026 Buying Guide
- Did the Steam Deck Get a New Box Design? What Changed
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090