Bertech ESD Soldering Mat Kit
Bottom line: The Bertech ESD Soldering Mat Kit: 18 x 24 in work surface fits a full motherboard plus iron and parts; main trade-off: 0.06 in thickness gives little cushion for dropped boards or screws.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 18 x 24 in work surface fits a full motherboard plus iron and parts
- ✓ Two-layer build: blue dissipative top laminated to black conductive rubber base
- ✓ Ground path measured at 1 x 10e3-10e5 ohms point-to-point and to ground
- ✓ Kit includes adjustable ESD wrist strap, alligator clip, and grounding cord
- ✓ Rated against hot solder, oils, grease, and common shop solvents
Cons
- ✗ 0.06 in thickness gives little cushion for dropped boards or screws
- ✗ 18 x 24 in leaves no room for a bench PSU or scope alongside a full ATX board
- ✗ Blue top shows solder flux and flux-remover residue more than black mats
- ✗ Grounding cord needs a properly wired outlet ground, not supplied or verified
Manufacturer description
Bertech ESD Soldering Mat Roll offers excellent resistance to oils, grease, and most common solvents, hot solders, and soldering irons. Resistance to ground and point-to-point is 1 x 10e3–10e5 ohms. The mats are available as kits, including the mat, ESD fabric adjustable wrist strap, removable alligator clip, and a grounding cord. The mat is 0.06 inches thick and has two layers.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Bertech ESD Soldering Mat Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "18 x 24 in work surface fits a full motherboard plus iron and parts"; the main trade-off is "0.06 in thickness gives little cushion for dropped boards or screws". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- STRONG WORKSTATION PAD: Designed for electronic assembly, this grounding mat offers excellent resistance to oil, grease, most common solvents, hot solders, and soldering irons; comes with a wrist strap, alligator clip, and ground cord
- DURABLE MATERIAL: Made of a two-layered rubber with ESD properties; the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer
- MULTI-PURPOSE: For use in aerospace assembly, electronic manufacturing, electronic repairs, fiber optics, hospitals, medical assembly, and soldering in high-temperature setting
- SPECIFICATIONS: Mat is 0.06 inches thick, 18 inches wide, and 24 inches long with a resistance to ground and point-to-point of 1 x 10e3–10e5
- SAFETY COMES FIRST: Bertech is a leading source of Electrostatic Discharge Products (ESD), Kapton Tapes, and Finger Cots; we also produce customized kits to meet our customers' specific requirements
Full Specifications
| Brand | Bertech |
|---|---|
| Unit Count | 1 Count |
| Model Number | 2059S-18x24BKT |
| SPECIFICATIONS | Mat is 0.06 inches thick, 18 inches wide, and 24 inches long with a resistance to ground and point-to-point of 1 x 10e3–10e5 |
| Number of Items | 1 |
| Number of Packs | 1 |
| Included Components | Mat^Wrist Strap^Ground Cord |
| Manufacturer Part Number | 2059S-18x24BKT |
| Item Dimensions D x W x H | 0.06"D x 18"W x 0.06"H |
| Full listing title | Bertech ESD Soldering Mat Kit, 18 Inches Wide x 24 Inches Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA) |
Ready to buy?
Bertech ESD Soldering Mat Kit, 18 Inches Wide x 24 Inches Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Razer Blade 16 (2026) Review: Gaming Performance and Endurance
- Qwen 3.6 27B vs Gemma 4 31B Local Inference: VRAM, Tok/s, and Quality Across Quantizations
- Asus ROG Harpe II Extreme Lands With a 65K-DPI Sensor
- HyperX QuadCast 2 vs Blue Yeti for Streaming in an Untreated Room
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- Qwen 3.6 27B vs DeepSeek V4: Which Local Model Wins on a Single 5090?
- Best GPU for Running 27B-32B Local LLMs in 2026
- Hyperscalers May Soon Outrun Their Cash Flow on AI Buildout
- Continuous Blood Pressure Monitoring Without a Cuff in 2026
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best Budget 4K Gaming Monitor in 2026?
- Llama 3.2 3B: Raspberry Pi 4 8GB vs RTX 3060 12GB for Local Inference
- Build a Budget Self-Hosted Game Server on a Ryzen 5 5600G in 2026
- Best Streaming Gear for New Creators in 2026
- AMD Ryzen AI Halo Mini PC: Open-Source Power Analyzed
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming PC
- Downsized Your Homelab? Here's What It's Worth
- Best NVMe SSD for a Compact Gaming PC: WD_BLACK SN770 in 2026
- Ryzen 7 5800X3D vs Intel Core i7-14700K for DDR4 Gaming
- Best CPU Cooler for the Ryzen 7 5800X: Air vs AIO in 2026
- Best Budget Upgrades for a Ryzen Gaming PC in 2026
- AVX-512 Speeds Linux Software RAID Up to 41% — What It Means for Your Homelab NAS
- Intel LLM-Scaler vLLM 1.4 on Arc Pro B70: What the Latest Driver Stack Means for Local Inference
- Is the RTX 3060 12GB Still the Best Budget GPU for 1080p Esports in 2026?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090