WMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller Replacement Joystick Control Stick Compatible with PS2 Arduino Raspberry Pi
Bottom line: The WMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller ($12.99 on Amazon as of 2026-10-25 10:26 UTC): Dual output: DO pin for the push switch, AO pins for X/Y analog reads; main trade-off: not designed for high-current loads, so no direct motor or relay driving.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-25. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Dual output: DO pin for the push switch, AO pins for X/Y analog reads
- ✓ Standard 2.54mm headers drop straight onto Arduino and Raspberry Pi jumper wires
- ✓ PS2-style thumbstick feel, familiar to anyone who has used a console pad
- ✓ Compact 37x25x32mm, 15g footprint fits inside small robot and handheld builds
Cons
- ✗ Not designed for high-current loads, so no direct motor or relay driving
- ✗ 5V supply only; 3.3V logic boards need a level shifter or divider
- ✗ Bare breakout board with no enclosure, mounting hardware, or jumper wires
- ✗ 10 units is overkill if you only need one or two joysticks for a project
SpecPicks Verdict
SpecPicks scored WMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller… using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. WMYCONGCONG's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Game joystick module compatible with PS2, electronic building blocks standard connector with 2.54mm pin.
- DO port for digital output, AO port for analog output.
- Bi-directional 10 k resistor, the resistance changes with the rocker in a different direction.
- Module uses 5V power supply, the original state of X, Y read voltage of 2.5 V. When pressing at the arrow direction, voltage increases, maximum is 5 v, at opposite direction of the arrow, the voltage value decreases, minimum is 0 v.
- Package Content: 10 pcs Game Controller Joystick Module. NOT designed for high current applications.
Full Specifications
| Brand | WMYCONGCONG |
|---|---|
| Package Content | 10 pcs Game Controller Joystick Module. NOT designed for high current applications. |
Hardware benchmark data
Ready to buy?
WMYCONGCONG 10 PCS Game Joystick Breakout Module Game Controller Replacement Joystick Control Stick Compatible with PS2 Arduino Raspberry Pi is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-25. Price and availability subject to change.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU Cooler for AM4 Ryzen Overclocking (2026 Edition)
- Best PC Gaming Controllers in 2026: 5 Top Picks
- Ryzen AI Max+ 395 LLM Inference: Specs, Bandwidth, Reality
- Play Retro Games in Your Browser: Best Emulators 2025
- Mistral Medium 3.5 128B on Local Hardware: MLX 4-bit at ~70GB Explained
- AMD Ryzen AI Halo Ships with a Fully Open-Source Linux Stack
- DeepCool AK620 vs Noctua NH-U12S for Ryzen 7 5800X: Which Air Cooler Wins in 2026?
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- MTP Decoding on RTX 3060 12GB: When Multi-Token Prediction Helps (and Hurts)
- AI-Driven Sound Blaster Driver Recovery on Win98 in 2026
- Best IDE & SATA-to-USB Adapters for Retro PC Builds in 2026
- Running a Local Coding Agent on an RTX 3060 12GB: Qwen3-Coder in Practice
- Best CPU Cooler for High-TDP Builds (2026)
- Qwen3.6-35B-A3B vs Gemma 4 26B-A4B: MoE Showdown on Consumer GPUs
- Gemini 3.5 Flash vs Local LLMs on a 12GB GPU: When Cloud Wins
- Best Gaming SSD in 2026: 5 Picks for PS5, Steam Deck, and Custom Builds
- $100 CPU Shootout: Ryzen 5 5500 vs Core i3-14100F vs i3-12100F
- Best SSD for a Retro PC Build: CompactFlash vs SATA in 2026
- How nVidia Killed 3dfx — and Why Voodoo Still Haunts Every GPU Launch
- Raspberry Pi 4 8GB vs a Used Mini PC for a 2026 Beginner Homelab
- Fine-Tune Video and Image Models at Scale: NeMo vs Diffusers
- First-Time Steam Deck Emulation Setup: A Complete Guide
- Build a Pi Zero W Retro Handheld in 2026: Full Parts List and Setup
- Best SSD Upgrade for PS4 Pro & PS4 Slim in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090