Skip to main content
Official Raspberry Pi Zero W Case
Raspberry Pi

Official Raspberry Pi Zero W Case

Bottom line: The Official Raspberry Pi Zero W Case ($13.95 on Amazon as of 2026-11-20 11:25 UTC, orderable but not in stock): Official Raspberry Pi design with precise cutouts for every Zero W port and connector; main trade-off: board not included - you supply your own Raspberry Pi Zero W separately.

$13.95 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For emulation handhelds, FPGA consoles and flash carts, synthesises manufacturer documentation, community compatibility lists and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Official Raspberry Pi design with precise cutouts for every Zero W port and connector
  • ✓ Snap-together assembly needs no tools, screws, or extra mounting hardware
  • ✓ GPIO header stays reachable through the lid opening for HATs and jumper wiring
  • ✓ Camera connector cutout keeps CSI ribbon runs usable inside the enclosure

Cons

  • ✗ Board not included - you supply your own Raspberry Pi Zero W separately
  • ✗ Camera Module also sold separately despite the camera-ready cutout
  • ✗ Fits only the Zero W footprint, so Pi 3, 4, and 5 boards will not seat
  • ✗ Passive plastic shell with no fan mount or heatsink clearance called out

Manufacturer description

This official case is specifically designed to house the Raspberry Pi Zero W, providing protection and a polished appearance for your single-board computer. The case features a snap-fit design that allows for easy assembly without the need for tools or additional hardware. Constructed from durable materials, it safeguards your Raspberry Pi Zero W from dust, debris, and minor impacts while maintaining access to essential ports and GPIO pins. The case design accommodates the compact form factor of the Pi Zero W, ensuring a precise fit. Please note that this product is a protective enclosure…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Official Raspberry Pi Zero W Case, so this read rests on the manufacturer's listed specs and the current price in the emulation hardware category (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. On the listing's own facts, the case for it is "Official Raspberry Pi design with precise cutouts for every Zero W port and connector"; the main trade-off is "Board not included - you supply your own Raspberry Pi Zero W separately". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Product Contents: This case does NOT include a Raspberry Pi or Camera Module
  • Custom Design: Specifically designed to fit the Raspberry Pi Zero W board with precise cutouts for all ports and connectors
  • Easy Access: Features convenient openings that provide full access to GPIO pins, camera connector, and all essential ports
  • Protective Construction: Durable case construction shields your Raspberry Pi Zero W from dust, debris, and accidental damage during use
  • Simple Assembly: Snap-together design allows for quick and tool-free installation of your Raspberry Pi Zero W board

Full Specifications

BrandRaspberry Pi
Colormulticolor
Fan Size120 Millimeters
Materialrubber
Case TypeRaspberry Pi
Model NameSC0038
Unit Count1.0 Count
Easy AccessFeatures convenient openings that provide full access to GPIO pins, camera connector, and all essential ports
Model NumberSC0038
Custom DesignSpecifically designed to fit the Raspberry Pi Zero W board with precise cutouts for all ports and connectors
Cooling MethodAir
Number of Fans3
Mfr Part NumberRPI-020
Simple AssemblySnap-together design allows for quick and tool-free installation of your Raspberry Pi Zero W board
Product ContentsThis case does NOT include a Raspberry Pi or Camera Module
Compatible DevicesRaspberry Pi Zero, Raspberry Pi Zero W
Enclosure Materialrubber
Total USB 3.0 Ports1
Warranty Description1Year Manufacturer
Hard Disk Form Factor3.5 Inches

Ready to buy?

Official Raspberry Pi Zero W Case is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Current Price on Amazon

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Emulation Hardware

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →