Skip to main content
C4Labs - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex
C4Labs

C4Labs - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex

Bottom line: The C4Labs - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or: Fits Pi Zero/Zero W plus JumboSPOT or LoneStar MMDVM Simplex hotspot; main trade-off: kit only; assembly required, no Pi or components included.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For emulation handhelds, FPGA consoles and flash carts, synthesises manufacturer documentation, community compatibility lists and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Fits Pi Zero/Zero W plus JumboSPOT or LoneStar MMDVM Simplex hotspot
  • ✓ Stainless steel hardware and acrylic build
  • ✓ Ships with 2 tops: one with antenna hole, one without
  • ✓ Cutouts for SD card and camera port access

Cons

  • ✗ Kit only; assembly required, no Pi or components included
  • ✗ OLED screen must be mounted to the board by you
  • ✗ Pi Zero 2 not tested for heat issues in this case
  • ✗ Not waterproof; full coverage but no weather sealing

Manufacturer description

For Raspberry Pi Zero and Zero W (not included),JumboSPOT or LoneStar MMDVM Simplex (not included), and an OLED screen (not included).Note: Raspberry Pi Zero 2 has not been tested for heat issues.The JRZ-1S case allows you to elegantly combine the Raspberry Pi Zero/Zero W, JumboSPOT or LoneStar MMDVM Simplex, and an OLED screen. (OLED screen will need to be mounted directly to board by customer). We go the extra mile to make sure everything we make feels solid and looks great. We use stainless steel hardware and acrylic to construct this case and guarantee you will love it as much as we…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for C4Labs - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. On the listing's own facts, the case for it is "Fits Pi Zero/Zero W plus JumboSPOT or LoneStar MMDVM Simplex hotspot"; the main trade-off is "Kit only; assembly required, no Pi or components included". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • This is case kit. Assembly is required. No components are included.
  • Full body coverage for Raspberry Pi, JumboSPOT or LoneStar MMDVM Simplex and OLED screen (not waterproof). Note: Raspberry Pi Zero 2 has not been tested for heat issues. Enough room for .96″ OLED screen to be mounted directly to JumboSPOT or LoneStar MMDVM Simplex by customer
  • Cut outs for easy access to SD card and camera ports
  • Comes with 2 tops: one with antenna hole and one without
  • Pin-hole access to boot and reset buttons on top of case

Full Specifications

BrandC4Labs
ColorBlack Ice
MaterialAcrylic
Case TypeRaspberry Pi
Model NameJRZ-1S
Light ColorBlack
Model NumberJRZ-1S-BLK
Cooling MethodWater
Mfr Part NumberJRZ-1S-BLK
Special FeaturePortable
Antenna LocationJumboSPOT, Lonestar MMDVM
Comes with 2 topsone with antenna hole and one without
Compatible DevicesJumboSPOT, Lonestar MMDVM
Enclosure MaterialAcrylic
Hard Disk Form Factor3.5 Inches
Supported MotherboardMini ITX
Motherboard CompatabilityMini ITX
Recommended Uses For ProductJumboSPOT, Lonestar MMDVM
Other Special Features of the ProductPortable

Ready to buy?

C4Labs - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Emulation Hardware

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →