Timetec
Timetec 4GB DDR3 / DDR3L 1333MHz PC3-10600 Non ECC Unbuffered 1.5V / 1.35V CL9 Dual Rank
Bottom line: The Timetec 4GB DDR3 / DDR3L 1333MHz PC3-10600 Non ECC Unbuffered 1.5V / ($14.99 on Amazon as of 2026-10-06): Listed for Dell Optiplex 780 DT, MT and SFF models; main trade-off: only 4GB per module; one stick per package.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Listed for Dell Optiplex 780 DT, MT and SFF models
- ✓ Dual voltage: runs at 1.35V or 1.5V
- ✓ Low-density 2Rx8 layout (256x8 chips) suits older chipsets
- ✓ Standard PC3-10600 1333MHz speed with CL9 timings
- ✓ Lifetime warranty from purchase date plus free tech support
Cons
- ✗ Only 4GB per module; one stick per package
- ✗ 1333MHz is slower than DDR3-1600 kits
- ✗ Desktop 240-pin only; will not fit laptops
- ✗ Non-ECC unbuffered; not for boards that require ECC or registered RAM
Manufacturer description
The Timetec 4GB DDR3 / DDR3L 1333MHz memory module is a direct RAM upgrade for the Dell Optiplex 780 in DT, MT and SFF form factors, and for other desktops that take standard DDR3 memory. If your Optiplex is slow because it runs out of memory, adding a module like this is one of the simplest ways to bring an older office PC back into daily use. This is a 240-pin PC3-10600 module that runs at 1333MHz with CL9 timings. It is a dual-voltage DDR3L part, so it works at the JEDEC standard 1.35V or at 1.5V and fits boards that expect either voltage. The module is a dual rank 2Rx8 design built on…
SpecPicks Verdict
SpecPicks scored Timetec 4GB DDR3 / DDR3L 1333MHz PC3-10600 Non ECC Unbuffered 1.5V /… using a rating × review-volume × price-fit model applied to published specs and reviews across the memory & ram category. Timetec's memory & ram lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for memory & ram of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this Timetec 4GB stick work in my Dell Optiplex 780?
Yes. It is listed for the Optiplex 780 in DT, MT and SFF versions. It is a 240-pin DDR3/DDR3L 1333MHz PC3-10600 non-ECC unbuffered module, which is the type of memory that system uses.
Can I use this RAM in a laptop?
No. This is a 240-pin desktop module. Timetec states it is for desktop computers, not laptops, which need the smaller SO-DIMM form factor.
Does it run at 1.35V or 1.5V?
Both. It is a dual-voltage DDR3L module that meets the JEDEC 1.35V standard and also runs at 1.5V, so it works on boards that supply either voltage.
How many modules come in the package?
One. The package is 1x4GB. For 8GB or for dual-channel operation, buy two modules and install them in matching channel slots.
What warranty does Timetec offer on this memory?
Timetec offers a lifetime warranty from the purchase date and free technical support for this module.
Key Features
- DDR3 / DDR3L 1333MHz PC3-10600 240-Pin Non-ECC Unbuffered 1.5V / 1.35V CL9 Dual Rank 2Rx8 based 256x8
- Module Size: 4GB Package: 1x4GB ; JEDEC standard 1.35V, this is a dual voltage piece and can operate at 1.35V or 1.5V
- Module Size: 4GB Package: 1x4GB For Desktop Computer, Not for Laptop
- Guaranteed – Lifetime warranty from Purchase Date Free technical support
Full Specifications
| Brand | Timetec |
|---|---|
| Voltage | 1.5 Volts |
| RAM Size | 4 GB |
| Form Factor | DIMM |
| Module Size | 4GB Package: 1x4GB ; JEDEC standard 1.35V, this is a dual voltage piece and can operate at 1.35V or 1.5V |
| Memory Speed | 1333 MHz |
| Model Number | 7 |
| Number of Pins | 240 |
| Mfr Part Number | 7 |
| Memory Generation | DDR3 |
| Compatible Devices | Desktop |
| Data Transfer Rate | 1333 MHz |
| Memory Form Factor | UDIMM |
| Additional Features | Non ECC |
| Computer Memory Size | 4 GB |
| Warranty Description | Lifetime Warranty |
| RAM Memory Technology | DDR3, DDR3L |
| Column Address Strobe Latency | CL9 |
| Full listing title | Timetec 4GB DDR3 / DDR3L 1333MHz PC3-10600 Non ECC Unbuffered 1.5V / 1.35V CL9 Dual Rank for Dell Optiplex 780 DT/MT/SFF Memory Ram Upgrade and More (Low Density 4GB) |
Ready to buy?
Timetec 4GB DDR3 / DDR3L 1333MHz PC3-10600 Non ECC Unbuffered 1.5V / 1.35V CL9 Dual Rank for Dell Optiplex 780 DT/MT/SFF Memory Ram Upgrade and More (Low Density 4GB) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Memory & RAM
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- Best Hardware for Running Small Language Models Locally in 2026
- Windows 98 vs Windows 2000 for a GeForce-Era Retro Gaming Build
- Nintendo Switch Steering Wheel V2: A 3D-Printed Accessibility Controller
- Forza Horizon 6: Is 8GB VRAM Enough or Do You Need an RTX 3060 12GB?
- Building a 2003-Era LAN Party Rig: Pentium 4, GeForce FX 5900, Audigy 2 ZS
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic Under $200
- Sound Blaster Audigy 2 ZS Won't Install on Windows XP: Driver Hunt + Fix
- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- RTX 5080 vs RX 7900 XTX: Which GPU Wins in 2026?
- Gemma 4 26B-A4B NVFP4 vs Qwen 3.6 27B Q4_K_M: Single-GPU Local Inference Benchmarked
- Corsair's New Gaming Mouse Has a Dedicated Stream Deck Launch Button
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- Best SATA SSD to Upgrade a PlayStation 4 Pro in 2026
- vLLM Framework Vulnerability: What Local LLM Operators Need to Patch in 2026
- Ryzen AI Max LLM Test: What the Public Data Shows
- vLLM vs Ollama on an RTX 3060 12GB: Which Server Wins?
- Logitech G502 Hero in 2026: Is the FPS Mouse King Still Worth It?
- Best Controller for PC Gaming in 2026: GameSir G7 SE vs DualSense vs HORI
- PCI vs ISA Serial Cards on Windows 98 and DOS: Which Chipsets Actually Work
- Best CPU Cooler for the Ryzen 7 5700X: Noctua vs DeepCool vs CoolerMaster
- Linux 7.3: 'Flatten the Pick' Scheduler Gains for Gaming
- AI-Driven Win98 Voodoo Driver Install: A Repeatable Vision-LLM Playbook for the Sound Blaster Audigy FX
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090