Twinkle Bay
Twinklebay DB25 Breakout Connector D-sub Breakout 25 Pin Connector with Nut
Bottom line: The Twinklebay DB25 Breakout Connector D-sub Breakout 25 Pin Connector is a specs-and-price decision rather than a crowd-consensus one in the cables & connectors category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ With insulation foam at the bottom
- ✓ Backed by Twinkle Bay's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Net weight: 56g/pcsPackage weight: 116gPCB dimensions(L x W): 3.15 x 2.1''/80 x 54mmExternal dimension (L x W x H): 3.4 x 2.1 x 0.7"/87 x 54 x 18mmTerminal hole diameter: 0.12''/3mm, terminal hole center distance : 0.2''/5mmWire range: 26-16AWGRated current: 10AMaterial:Base: copper base and plastic partTorque: 0.2Nm (1.7Lb-In.)Screws: steel, Cr3+ Zn platedPin header and cage: BrassPackage included:1 x DB25 breakout board male adapter1 x DB25 breakout board female adapter1x Slotted screwdriver
SpecPicks Verdict
SpecPicks scored Twinklebay DB25 Breakout Connector D-sub Breakout 25 Pin Connector using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Twinkle Bay's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- With insulation foam at the bottom
- All-copper base, contacted better and more antioxidative
- All signal ports named and labeled clearly
- PCB carrier, FR-4 fiber glass PCB
- Compliant assembly, multiple checked before fulfilled
Full Specifications
| Brand | Twinkle Bay |
|---|---|
| Color | green |
| Gauge | 16.0 |
| Model | 781903435785 |
| Pitch | 0.2 Inches |
| Material | Copper, Plastic |
| Item Pitch | 0.2 Inches |
| Unit Count | 1.0 Count |
| Material Type | Copper, Plastic |
| Mounting Type | DIN Rail Mount |
| Connector Type | D Sub |
| Number Of Poles | 25 |
| Centerline Length | 3.4 Inches |
| Number Of Contacts | 25 |
| Number of Positions | 25 |
| Item Dimensions W x H | 3.4"W x 0.7"H |
| Full listing title | Twinklebay DB25 Breakout Connector D-sub Breakout 25 Pin Connector with Nut (Male Adapter x 1, Female Adapter x 1) |
Ready to buy?
Twinklebay DB25 Breakout Connector D-sub Breakout 25 Pin Connector with Nut (Male Adapter x 1, Female Adapter x 1) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB: Measured Perf
- Offline Suitcase Robot: Jetson Orin NX SUPER + Gemma 4 E4B
- How to Build a Fully Declarative Homelab Stack
- Sound Blaster Audigy FX Deep Dive: Is It Worth It for a 2003 WinXP Period-Correct Gaming Build?
- 1440p 500Hz QD-OLED Monitors: 2025 Round-Up
- GLM-5.2 With CPU Offload: Ryzen 7 5800X + RTX 3060 12GB Tested
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- STEPLA-1 8-Bit Hardwired CPU: 74-Series Logic Explained
- Streamer PC Specs Decoded: The 2026 Parts That Match
- Mistral Medium 3.5 Hardware Requirements: 128B Dense, 78 GB at Q4
- Grok Imagine Video 1.5 Hits #2 — But Local Video Gen on an RTX 3060 Is Still Free
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- Qwen 3.6 35B-A3B KV Cache Deep Dive: Memory, PPL, and Quantization Tradeoffs
- vLLM 0.21 Adds Intel Arc Support: The Local Stack Widens
- Best SATA SSD to Upgrade Your PS4 Pro in 2026
- Add Wireless Controllers and More Games to Your SNES Classic & Genesis Mini in 2026
- Reviving the LAN Party in 2026: Arcade Sticks, Classic Consoles, and Local Multiplayer
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- Samsung Winds Down Chip Output Before Strike — Brace for SSD Prices
- AMD Ryzen AI Max+ 395 vs Mac Studio M4 Max for Local LLM Inference
- NVIDIA RTX A6000 48GB Review: The Workstation Card That Still Owns Local 70B Inference (2026)
- GPU VRAM Guide: Running a 5GB TTS Model Locally
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090