Miuzei Case for Raspberry Pi 4 Model B 4gb with Fan Cooling 4Pcs HeatSinks
Bottom line: The Miuzei Case for Raspberry Pi 4 Model B 4gb with Fan Cooling 4Pcs: Complete kit: case, 35mm fan, 4 aluminum heatsinks, 4 rubber feet, screwdriver included; main trade-off: acrylic scratches and cracks more easily than aluminum or ABS enclosures.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Complete kit: case, 35mm fan, 4 aluminum heatsinks, 4 rubber feet, screwdriver included
- ✓ Acrylic shell does not block Wi-Fi or Bluetooth signal like metal cases do
- ✓ All ports exposed: USB-C, dual micro HDMI, A/V, USB, Ethernet, GPIO, camera, micro SD
- ✓ Rubber feet raise the base for underside airflow and protect desk surfaces
Cons
- ✗ Acrylic scratches and cracks more easily than aluminum or ABS enclosures
- ✗ Fan is active cooling, so it draws 5V power and adds noise a passive case avoids
- ✗ Fits only Raspberry Pi 4 Model B; no stated support for Pi 3, Pi 5, or Zero
- ✗ Layered acrylic assembly means peeling protective film from every panel first
Manufacturer description
The Miuzei Case for Raspberry Pi 4 Model B wraps your board in a clear blue acrylic shell so the Pi stays visible while it runs, which matters if you are building a desk-side emulation box or a small office server you actually want to look at. The kit ships as a complete cooling package: a 35mm brushless DC 5V fan rated quiet by Miuzei, four aluminum heatsinks, four rubber feet, and a screwdriver, so nothing else is needed to finish the build. The layered acrylic design is aimed at beginners and hobbyists alike, and every port stays reachable once assembled, including USB-C power, dual micro…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Miuzei Case for Raspberry Pi 4 Model B 4gb with Fan Cooling 4Pcs…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. On the listing's own facts, the case for it is "Complete kit: case, 35mm fan, 4 aluminum heatsinks, 4 rubber feet, screwdriver included"; the main trade-off is "Acrylic scratches and cracks more easily than aluminum or ABS enclosures". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this case fit the Raspberry Pi 5 or Pi 3?
No. Miuzei lists this case as designed for the Raspberry Pi 4 Model B / 4B only. No compatibility with the Pi 3, Pi 5, or Pi Zero is stated, so check the listing before buying for another board.
Does the fan need to be wired to the GPIO pins?
The included 35mm brushless fan is a DC 5V unit, which on a Raspberry Pi 4 is powered from the GPIO header's 5V and ground pins. Refer to the included instructions for the exact pin placement.
Will the acrylic case weaken my Pi's Wi-Fi signal?
No. Miuzei specifies that the transparent acrylic shell does not block the signal, which is the main reason to choose acrylic over a metal enclosure for a wireless Pi 4 build.
What exactly comes in the box?
You get the Pi 4 case panels, four aluminum heatsinks, one 35mm cooling fan, four rubber feet, and a screwdriver. The Raspberry Pi 4 board itself is not included.
Is this case hard to assemble for a first-time builder?
Miuzei describes assembly as easy for beginners and amateurs, and the included screwdriver means no extra tools are needed. It is a layered acrylic design, so plan on stacking and screwing panels in order.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Case for Raspberry Pi 4 - Miuzei acrylic case is specially designed for pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur.
- Pi 4 Case With Fan - New pi4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your pi 4 B cool quickly even the CPU under high load.
- Transparent Clear Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface.
- Easy To Access All Ports - Miuzei rpi4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card.
- Packaging Content - you will receive pi 4 case, 4 piecess heatsinks, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others.
Full Specifications
| Brand | Miuzei |
|---|---|
| Color | Black/Blue |
| Fan Size | 35 millimeters |
| Material | Acrylic, Plastic |
| Case Type | Mid Tower |
| Model Name | case for raspberry pi 4 |
| Unit Count | 1 Count |
| Light Color | RGB, led |
| Connectivity | USB-C |
| Model Number | raspberry pi 4 case |
| Cooling Method | Air |
| Item Type Name | raspberry pi case |
| Number of Fans | 4 |
| Mfr Part Number | MC11-4-P-F |
| Total Usb Ports | 2 |
| Antenna Location | Business, Gaming |
| Compatible Devices | Raspberry Pi 4 Model B |
| Enclosure Material | Acrylic, Plastic |
| Total USB 2.0 Ports | 2 |
| Hard Disk Form Factor | 3.5 inches |
| Full listing title | Miuzei Case for Raspberry Pi 4 Model B 4gb with Fan Cooling 4Pcs HeatSinks | 3510 Brushless Quiet Fan, Acrylic Clear Blue Shell, Visible Internal Run, Dust-proof, Full Port Access, for Desktop Office |
Ready to buy?
Miuzei Case for Raspberry Pi 4 Model B 4gb with Fan Cooling 4Pcs HeatSinks | 3510 Brushless Quiet Fan, Acrylic Clear Blue Shell, Visible Internal Run, Dust-proof, Full Port Access, for Desktop Office is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- How to run Qwen 3 14B on Apple M3 Ultra
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- Strix Halo LLM Benchmarks 2026: What AMD's Ryzen AI Max+ Delivers
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- Perplexity's Local-or-Cloud Router: What Hardware Runs the Local Half
- Grok 4.5 at $0.31 a Task: When Cheap Cloud Beats a Local Build
- gpt-oss 20B: RTX 3060 12GB vs Ryzen 5 5600G CPU-Only (2026)
- Automated Cabinet Lighting With a Raspberry Pi: Build Guide
- Mistral Medium 3.5 128B on Local Hardware: MLX 4-bit at ~70GB Explained
- Best Budget SATA SSD for Gaming and Boot Drives in 2026
- Why Stock GPU Pastes Last Longer Than Aftermarket Ones
- How to run Qwen 3 32B on Apple M3 Ultra
- Leanstral 1.5 on an RTX 3060 12GB: Local Math + Bug-Finding Benchmarks
- GPT-5.6 Sol Ultra Shipped: Cloud vs Local Coding Rig
- Intel Arc A770 16GB for Local LLMs: 2025–2026 Guide
- Best AM4 Upgrade Parts Under $100 Each in 2026
- Audio DSP Firmware for the Raspberry Pi Pico: A 2026 Guide
- Voodoo 5 6000 Stability: Hangs, Wedges and a Bricked Board
- Why NVIDIA's New AI Servers Use Hot-Tub Coolant
- IPEX-LLM + Ollama in Docker: Running Local Models on Intel GPUs
- Best Plug-and-Play Retro Gaming Consoles to Buy in 2026
- Build an 8-Node Raspberry Pi Cluster for Distributed Computing (2026)
- Intel Arc B580 for LLM Inference: What It Can Actually Do
- IDE-to-USB and CompactFlash Adapters for Retro PCs: FIDECO vs Unitek vs Vantec
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090