Monoprice
Monoprice Power Cord - NEMA 5-15P to IEC 60320 C13, 13 Amp, 1625 Watt, 3-Prong, 16AWG, 8 Feet, Black
Bottom line: The Monoprice Power Cord is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category, priced around $7.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 3-Prong Power Cord
- ✓ Backed by Monoprice's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Connect your computer, monitor, power adapter, or other device with a male IEC 60320 C14 panel connector to a standard US AC wall outlet using this cable. This cable features a standard, ground NEMA 5-15P plug on one end and an IEC 60320 C13 connector on the other end. Simply mate the female C13 connector with the male C14 connector on your device, then plug the NEMA connector into a nearby AC power outlet, UPS, or other AC power source.
SpecPicks Verdict
SpecPicks scored Monoprice Power Cord using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. Monoprice's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 3-Prong Power Cord
- Designed to carry up to a 13 amp/1625 watt, 125 volt load
- 8 Ft Length
- 16 AWG Wire Gauge
Full Specifications
| Brand | Monoprice |
|---|---|
| Color | Black |
| Gauge | 16 AWG |
| Voltage | 125 Volts |
| Wattage | 1625 watts |
| Amperage | 13 Amps |
| Plug Type | NEMA® 5‑15P |
| UL Listed | No |
| Unit Count | 1.0 Count |
| Item Length | 96 Inches |
| Plug Format | NEMA® 5‑15P |
| Model Number | 127292 |
| Input Current | 13 Amps |
| Built-In Media | 3-Prong Power Cord |
| Mfr Part Number | 127292 |
| Connector Gender | Male-to-Female |
| Special Features | Not_Performance_Used |
| Number of Outlets | 1 |
| Case Material Type | SJT |
| Number Of Conductors | 3 |
Ready to buy?
Monoprice Power Cord - NEMA 5-15P to IEC 60320 C13, 13 Amp, 1625 Watt, 3-Prong, 16AWG, 8 Feet, Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Can the Ryzen 5 5600G Run Local LLMs Without a GPU?
- Hugging Face Says an AI Agent Breached Its Infrastructure
- Best Budget Gaming SSDs Under $100 in 2026
- Best Streaming Mic for Console Gaming in 2026: HyperX QuadCast 2 vs Blue Yeti
- Throw a Modern Retro LAN Party in 2026: The Hardware Checklist
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- Best Retro Emulator Consoles 2026: AMD GPU Buying Guide
- Logitech G29 vs HORI Force Feedback: Which Sim Wheel for Beginners?
- Best Budget SATA SSD for a Steam Game Library in 2026
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Claude Opus 4.8 Tops the Intelligence Index: Cloud vs Local on a 3060
- Intel i7-9700K vs Ryzen 7 5700X for a Budget 2026 Gaming Build
- Best Retro Gaming Consoles and Controllers to Buy in 2026
- Best Budget Gaming PC Build Parts in 2026: 5 Core Picks
- Best Mac for AI & LLM Workloads in 2026
- Run Text-to-SQL Locally on a 12GB GPU After Gemini-SQL2
- Sound Blaster AWE32 vs AWE64: The 1998 MIDI Decision
- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- Free Retro Game Emulators: Best Picks for 2026
- 360mm vs 240mm AIO: Is the Bigger Radiator Worth It in 2026?
- Is an RTX 3060 Enough for 4K Gaming? Pairing It With a Budget 4K Monitor
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- Best Streaming Microphone for Twitch and YouTube in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090