Skip to main content
SATA to 4 Pin Power Cable Adapter 3 Pack SATA 15 Pin Male to Molex LP4 Female Power Cable 7-inch
Pienmor

SATA to 4 Pin Power Cable Adapter 3 Pack SATA 15 Pin Male to Molex LP4 Female Power Cable 7-inch

Bottom line: The SATA to 4 Pin Power Cable Adapter 3 Pack SATA 15 Pin Male to Molex ($5.99 on Amazon as of 2026-11-20 23:18 UTC): Three adapters per pack covers an IDE boot drive, optical drive, and a spare; main trade-off: 7 inches may not reach top drive bays from a bottom-mounted PSU.

$5.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Three adapters per pack covers an IDE boot drive, optical drive, and a spare
  • ✓ 7-inch length avoids slack loops in cramped retro tower builds
  • ✓ SATA 15-pin male to Molex LP4 female fits standard modern PSU leads
  • ✓ Powers IDE drives from a current PSU without buying a legacy supply

Cons

  • ✗ 7 inches may not reach top drive bays from a bottom-mounted PSU
  • ✗ LP4 female output only - will not drive SATA or PCIe devices
  • ✗ No sleeving or braiding, so cables show in windowed cases
  • ✗ Single Molex output per cable, no daisy-chain for multiple drives

Manufacturer description

The Pienmor SATA to 4-Pin power adapter solves one of the most common problems in retro PC building: modern power supplies ship with SATA connectors, while IDE hard drives, older optical drives, and vintage case fans still expect a Molex LP4 plug. This 3-pack gives you a SATA 15-pin male input and a 4-pin Molex LP4 female output on a 7-inch cable, so you can run legacy drives from a current PSU without swapping the whole power supply or hunting down a period-correct unit. The 7-inch length is short by design. It reaches from a modern PSU's SATA lead to a drive bay or fan header without…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for SATA to 4 Pin Power Cable Adapter 3 Pack SATA 15 Pin Male to Molex…, so this read rests on the manufacturer's listed specs and the current price in the power supplies & cables category (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Three adapters per pack covers an IDE boot drive, optical drive, and a spare"; the main trade-off is "7 inches may not reach top drive bays from a bottom-mounted PSU". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this let me run an old IDE hard drive on a modern power supply?

Yes. That is the stated use case: the SATA 15-pin male end plugs into your PSU's SATA power lead, and the 4-pin Molex LP4 female end accepts the power connector on an IDE hard drive or older optical drive.

How long is the cable?

Each adapter is 7 inches. That is enough to bridge a SATA lead to a nearby drive bay or fan, but plan an extension if your PSU is bottom-mounted and the drive sits at the top of the case.

How many adapters come in the package?

Three. That covers a typical retro build with an IDE boot drive and an optical drive, with one left over for a Molex-powered case fan or add-in card.

Which direction does this adapter go?

SATA in, Molex out. The SATA 15-pin end is male and connects to your power supply; the 4-pin Molex LP4 end is female and connects to the legacy device. It does not convert Molex to SATA.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • SATA Power Cable Adapter can be SATA power supplies to power IDE hard drives
  • Connector:1x 4-pin Molex (LP4) Female
  • Connector: 1x SATA 15-pin Male
  • SATA 15 Pin Male to Molex LP4 Female Power Cable Provides 7" in cable length
  • SATA to LP4 Power Cable Adapter SATA 15pin revolution 4pin power cord.

Full Specifications

BrandPienmor
Colorblack
ModelSATA to LP4 Power Adapter
Cable TypeSATA Cable
Item ShapeRound
Model NameSATA to LP4 Power Adapter
Unit Count2 Feet
Item Length7 inches
Part Number4336291318
Connector TypeSata 15 Pin Male to 4-pin Molex Female
Number of Pins19
Maximum Current11 A
Number of Items3
Special FeatureThe core wire is tinned copper
Connector GenderSATA15Pin Male to Molex LP4 Female
Compatible Devicesfor Serial ATA Hard Drives and CD ROM Drives
Data Transfer Rate6 gigabits_per_second
Indoor Outdoor UsageOutdoor
Customer Package TypeStandard Packaging
Compatible Phone ModelsPotentially compatible with smartphones, specific models unknown

Ready to buy?

SATA to 4 Pin Power Cable Adapter 3 Pack SATA 15 Pin Male to Molex LP4 Female Power Cable 7-inch is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $5.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →