Custom Cable Connection 6 Foot BNC Male to BNC Male Times Microwave LMR-240 Ultraflex 4Ghz 50 Ohm Antenna Cable
Bottom line: Per its Amazon listing, the Custom Cable Connection 6 Foot BNC Male to BNC Male Times Microwave: times Microwave LMR240 4ghz VSWR 1.25 Cable.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Times Microwave LMR240 4ghz VSWR 1.25 Cable
- ✓ Backed by Custom Cable Connection's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Times Microwave LMR 240 Ultraflex BNC Male to BNC Male coaxial cables are designed for typical use in production, laboratory test and measurement, defense / military, aerial antenna towers, radio, antenna and interconnect with RF components. This LMR 240 Ultraflex BNC Male Cable assembly uses a 50 Ohm BNC male connector on both ends and has a 50 Ohm impedance for the cable.Assembled in USAConnectors: Amphenol RF 112533Times Microwave LMR240 4ghz VSWR 1.25 Cable50 Ohm ImpedanceOnce you have used LMR240 UltraFlex you will never go back to stiff cable.* LMR is a trademark of Times Microwave…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Custom Cable Connection 6 Foot BNC Male to BNC Male Times Microwave…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Times Microwave LMR 240 Ultraflex BNC Male to BNc Male coaxial cables are designed for typical use in production, laboratory test and measurement, defense / military, aerial antenna towers, radio, antenna and interconnect with RF components.
- This LMR 240 Ultraflex BNC Male Cable assembly uses a 50 Ohm BNC male connector on both ends and has a 50 Ohm impedance for the cable.
- Times Microwave LMR240 4ghz VSWR 1.25 Cable
- Assembled in Dallas, Texas
- Once you have used LMR240 UltraFlex you will never go back to stiff cable.
Full Specifications
| Brand | Custom Cable Connection |
|---|---|
| Color | Black |
| Frequency | 4 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 1 Count |
| Item Length | 6 feet |
| Part Number | 112931-6C |
| Connector Type | Coaxial |
| Number of Pins | 1 |
| Special Feature | Tangle Free |
| Connector Gender | Male |
| Compatible Devices | Video Camera, Oscilloscope, Professional Audio-Visual Equipment |
| Data Transfer Rate | 4 gigabits_per_second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | Antenna and RF Component Connections, Video Transmission |
| Other Special Features of the Product | Tangle Free |
Ready to buy?
Custom Cable Connection 6 Foot BNC Male to BNC Male Times Microwave LMR-240 Ultraflex 4Ghz 50 Ohm Antenna Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- GameSir G7 SE vs DualSense for PC Gaming: Which Controller Wins?
- CompactFlash to IDE: Period-Correct Silent Storage for Win98 Builds
- GTX 1660 VRAM: Why 8GB Doesn't Exist (Real Specs)
- CompactFlash Imaging for Retro PCs: A CF133 + IDE Workflow
- Best Budget SSD for Gaming in 2026: 5 Tested Picks Ranked
- Best GPU for Running Llama 3 8B Locally Under $350 (2026)
- Open-Source Layer Brings Reflex and Anti-Lag 2 to All GPUs
- Best Budget GPU for Local LLMs Under $300 in 2026: Why the RTX 3060 12GB Still Wins
- Samsung's 256GB microSD Falls to $47.99 — Plus the SSD Sidegrade
- Heterogeneous GPU Weighting and Layer Splitting: Mixed-GPU LLM Inference on Consumer Hardware
- Open WebUI + Ollama on an RTX 3060: The Self-Hosted ChatGPT Alternative for 2026
- NVIDIA Bankrolls AI Startups to Tighten Its Chip Grip
- Best Mouse Pad for FPS and MOBA Esports Players (2026)
- RTX 4090 AI Workstation vs AMD MI300X: 2025 Guide
- Best Streaming Setup Bundle in 2026: 5 Picks From Mic to Stream Deck
- Voodoo5 5500 PCI Boots on Modern ASUS P8Z77-V Pro — A Look at Retro GPUs in 2026 Boards
- Ryzen 7 5800X vs Ryzen 7 5700X for Gaming and Local AI: Which Wins?
- Best Controller for Steam Deck Docked Mode in 2026
- Anker's Thus Chip Claims 150x AI Boost: No Benchmarks Yet
- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
- Voodoo3 3000 PCI No-Display Troubleshooting on Windows 98 SE (2026)
- Best Budget SSD for a Steam Library in 2026: SATA vs NVMe on a Tight Budget
- Best Retro Emulator Consoles 2026: AMD GPU Buying Guide
- Best Budget GPU for Local LLMs in 2026: RTX 3060 12GB vs the Alternatives
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090