CNCTOPBAOS 3 Axis GRBL Control Board with Offline Controller for CNC Router
Bottom line: The CNCTOPBAOS 3 Axis GRBL Control Board: GRBL 1.1F firmware works with Candle and Universal Gcode Sender out of the box; main trade-off: windows XP through 10 only; no stated macOS or Linux support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ GRBL 1.1F firmware works with Candle and Universal Gcode Sender out of the box
- ✓ Offline SD/TF card controller runs jobs with no computer attached
- ✓ Dedicated E-stop, probe, and XYZ limit switch ports built onto the board
- ✓ Drives Nema17 or Nema23 steppers on all three axes up to 2A
- ✓ PWM spindle control spans 0-100% and handles spindles to 20000rpm
Cons
- ✗ Windows XP through 10 only; no stated macOS or Linux support
- ✗ 24VDC input means reusing a 12V 3018 power brick is not an option
- ✗ Mixed terminal pitches (2.54mm plus VH3.96mm spindle) complicate rewiring
- ✗ SD/TF offline controller is capped at 1G standard capacity
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CNCTOPBAOS 3 Axis GRBL Control Board, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the displays & upscalers category before committing. On the listing's own facts, the case for it is "GRBL 1.1F firmware works with Candle and Universal Gcode Sender out of the box"; the main trade-off is "Windows XP through 10 only; no stated macOS or Linux support". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Model: Upgraded 3 Axis GRBL 1.1F Control Board with Offline controller; Input voltage: 24VDC;Applications: The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO-MAX etc engraving machine or other GRBL Control CNC Router Machine
- Features: Add emergency stop button port,probe port and XYZ limit switches port; Add the power button switch; Used integrated imported stepper motor drive;Enhanced spindle drive,can support max. 20000rpm spindle
- Support software: GRBL Contol/Candle/Universal Gcode Sender; Support Computer System: Windows XP/7/8/10;The terminal of stepper motor,limit switch,tool setting and emergency stop button are 2-pin 2.54mm pitch,spindle is 2-pin port VH3.96mm pitch
- Stepper Motor: Support XYZ three-axis Nema17 or Nema23 stepper motor, motor's Max. Current of 2A or less is recommended within 1.5A; Spindle: Support 24V DC Spindle PWM speed 0%-100%,also support 12V 3-pin PWM/TTL Max. 3.0A engraving module
- Offline Controller:It supports SD card and TF card at the same time,standard capacity 1G, notebooks generally have SD card interface, copy files are very convenient,you can control the machine without computer
Full Specifications
| Size | 3 Axis |
|---|---|
| Brand | CNCTOPBAOS |
| Color | White |
| Style | Style-A |
| Weight | 1g |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Part Number | 4V |
| Connectivity | USB |
| Power Source | DC |
| Compatibility | Switch |
| Display Style | LCD or LED |
| Package Dimensions | 5.91 x 4.57 x 3.39 inches |
| Item Package Quantity | 1 |
| Full listing title | CNCTOPBAOS 3 Axis GRBL Control Board with Offline Controller for CNC Router | DC24V,USB,E-Stop/Probe/Limit Ports,PWM Spindle/Laser Control,Remote Hand Control Fits 1610/3018-PRO Engraver Milling Machine |
Ready to buy?
CNCTOPBAOS 3 Axis GRBL Control Board with Offline Controller for CNC Router | DC24V,USB,E-Stop/Probe/Limit Ports,PWM Spindle/Laser Control,Remote Hand Control Fits 1610/3018-PRO Engraver Milling Machine is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Displays & Upscalers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSD to Upgrade a PlayStation 4 Pro in 2026
- When OpenAI Retires a Model: Build a Local RTX 3060 Hedge
- Best USB Microphone for Streaming in 2026
- Build a Pocket Retro Emulation Handheld on the Raspberry Pi Zero W in 2026
- Best GPU for DeepSeek-R1 32B (2026)
- Best CPU Cooling for AMD Ryzen Builds in 2026
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- Best Logitech Gaming Gear in 2026: Mice, Keyboards, and Wheels
- AI-Driven Win98 Voodoo3 Driver Recovery on a Raspberry Pi 5 Companion
- Best GPU for Running Llama 70B Locally in 2026
- Best SATA SSD for Gaming and Game-Library Storage in 2026
- Best Wired Gaming Headset Under $50 for PC and Console in 2026
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- How to Filter Steam Deck's 20K+ Games by FPS, Price, HLTB
- Best GPU for Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- Building a MAME Fighting Setup: Fight Stick + CF Storage for an Arcade Corner
- Best Raspberry Pi for Klipper in 2026: Pi 4 8GB vs Alternatives
- Transcend CF133 CompactFlash as a Retro PC Boot Drive: Setup + Gotchas
- Q4_K_M Is Fine for Chat, a Trap for Agents: KV Cache Quant Math for Local Coding
- RTX 5080 vs RX 7900 XTX: Which GPU Wins in 2026?
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- Building a 2001 LAN-Party Rig: Pentium III, GeForce 3, Win98 SE Period-Correct Build Log
- Noctua NH-U12S vs NZXT Kraken M22 in a Mini-ITX Ryzen 7 5800X Build
- Best Budget Build for Local LLMs in 2026: How Far a Ryzen 5 5600G + RTX 3060 Gets You
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090