247 Solder
247-FLUX-5 No Clean Tacky Soldering Flux 5 Grams
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-08-05. Price and availability subject to change.
Bottom line: The 247-FLUX-5 No Clean Tacky Soldering Flux 5 Grams is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category, priced around $5.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.
Pros & Cons
Pros
- ✓ Backed by 247 Solder's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Tacky Soldering Flux For electronic soldering Use with leaded soldering wire or lead free soldering wire Two dispensing tips 16g and 20g
SpecPicks Verdict
SpecPicks scored 247-FLUX-5 No Clean Tacky Soldering Flux 5 Grams using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the tools & maintenance category. 247 Solder's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Full Specifications
| Brand | 247 Solder |
|---|---|
| Material | Solder Flux |
| Part Number | 247-FLUX-5 |
Ready to buy?
247-FLUX-5 No Clean Tacky Soldering Flux 5 Grams is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
View Current Price on Amazon →
*Price sourced from Amazon.com. Last updated 2026-08-05. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Parts for a Dual RTX 3060 24GB Local-LLM Build in 2026
- Double RTX 3070 VRAM: What's Actually Possible in 2026
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- CRT Monitor for Retro Gaming: What Actually Matters in 2025
- 8BitDo Sn30 Pro vs Pro 2: Best Bluetooth Controller for Raspberry Pi 4 Emulation
- Qwen3.8 Max vs Claude Opus 4.8: What the Cost-Per-Task Gap Means for Local Rigs
- Solar-Powered Raspberry Pi Bird Identifier Shows the Pi AI Camera's Reach
- Watercooled Gaming/Networking Rack: 2025 Build Guide
- Qwen2.5 7B on a Budget: RTX 3060 12GB vs Ryzen 5 5600G iGPU (2026)
- Best SATA SSD in 2026: Crucial BX500 vs Samsung 870 EVO vs WD Blue vs SanDisk
- Open-Source Layer Brings Reflex and Anti-Lag 2 to All GPUs
- The KVM That Runs a Pentium 4 Instead of a Raspberry Pi
- LM Studio vs Ollama on an RTX 3060: Which Local Runner Wins?
- CompactFlash and IDE-to-USB Adapters for Retro PC Builds in 2026
- Best SATA SSD to Revive an Old Gaming PC in 2026
- Build a Home NAS on a Raspberry Pi 4 8GB in 2026
- Pentium III Coppermine vs Tualatin: Which 2001 LAN Build CPU Aged Better
- Ollama vs llama.cpp vs vLLM — which local LLM runtime wins in 2026?
- Did the Steam Deck Get a New Box Design? What Changed
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- Qwen 3.6 27B vs Llama 3.1 70B on Local Hardware: tok/s, VRAM, and Quality (2026)
- Qwen-Image-3.0 on an RTX 3060 12GB: Local Text-in-Image Gen
- Running Llama 3.1 70B Locally: Hardware Requirements & Performance Benchmarks
- Ryzen 5 5600G vs Ryzen 7 5800X for a 24/7 Ollama Box
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090