Monoprice Power Cord - NEMA 5-15P to IEC 60320 C13, 18AWG, 10A/1250W, 125V, 3-Prong, 6ft, Blue
Bottom line: The Monoprice Power Cord: Standard C13 end fits most PC PSUs, monitors and adapters with a C14 inlet; main trade-off: 10A / 125V rating rules out C19/C20 high-draw gear like large servers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Standard C13 end fits most PC PSUs, monitors and adapters with a C14 inlet
- ✓ Grounded NEMA 5-15P 3-prong plug for US wall outlets, UPS units or power strips
- ✓ 18AWG conductors rated 10A / 1250W at 125V for typical desktop loads
- ✓ 6ft length reaches from an under-desk tower to a wall outlet or surge strip
- ✓ Blue jacket makes the cord easy to trace in a crowded bench or rack
Cons
- ✗ 10A / 125V rating rules out C19/C20 high-draw gear like large servers
- ✗ Fixed 6ft length; shorter or longer runs need a different SKU
- ✗ Straight connectors only; no right-angle option for tight rear clearances
- ✗ No locking C13 latch, so it can pull loose if the cord is tugged
Manufacturer description
The Monoprice Power Cord connects any device with an IEC 60320 C14 inlet to a standard US wall outlet. That covers most desktop PCs, monitors, power adapters and a lot of retro hardware. One end has a grounded NEMA 5-15P 3-prong plug. The other end has a female IEC 60320 C13 connector that seats onto the male C14 panel connector on your device. The cord is 6 feet long, which is enough to run from a tower under the desk to a wall outlet, surge strip or UPS. It uses 18AWG conductors rated for 10A, 1250W and 125V. That suits typical computer power supplies, CRT and LCD monitors, and vintage AT…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Monoprice Power Cord, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Standard C13 end fits most PC PSUs, monitors and adapters with a C14 inlet"; the main trade-off is "10A / 125V rating rules out C19/C20 high-draw gear like large servers". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this cord work with my desktop PC power supply?
Yes, if your PSU has a standard IEC 60320 C14 inlet, which most desktop ATX power supplies use. The C13 end plugs directly into it, and the NEMA 5-15P end goes into a US outlet.
How much power can this cable handle?
It is rated for 10A, 1250W at 125V and uses 18AWG wire. Keep the connected device's draw within those limits.
How long is the Monoprice power cord?
This version is 6 feet long. That is long enough to reach from a desk or under-desk tower to a nearby wall outlet, power strip or UPS.
Can I plug it into a UPS instead of a wall outlet?
Yes. The NEMA 5-15P plug fits standard US-style receptacles, including those on a UPS or surge protector with NEMA 5-15R outlets.
Does it fit monitors and older retro computers?
It fits any monitor, power adapter or vintage computer with a male IEC 60320 C14 panel connector. Check that your device's power inlet is a C14 before buying, because some older systems use different connectors.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Connect your computer, monitor, power adapter, or other device with a male IEC 60320 C14 panel connector to a standard US AC wall outlet using this cable.
- This cable features a standard, ground NEMA 5-15P plug on one end and an IEC 60320 C13 connector on the other end
- Simply mate the female C13 connector with the male C14 connector on your device, then plug the NEMA connector into a nearby AC power outlet
- Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Full Specifications
| Brand | Monoprice |
|---|---|
| Color | Blue |
| Gauge | 18.0 |
| Voltage | 125 Volts |
| Wattage | 1250 watts |
| Amperage | 10 Amps |
| Plug Type | Type B |
| UL Listed | No |
| Unit Count | 6.0 Feet |
| Item Length | 72 Inches |
| Plug Format | Type B |
| Model Number | 133604 |
| Input Current | 10 Amps |
| Built-In Media | Power Cable |
| Mfr Part Number | 133604 |
| Connector Gender | Male-to-Female |
| Special Features | Not_Performance_Used |
| Number of Outlets | 1 |
| Case Material Type | Polycarbonate |
| Number Of Conductors | 3 |
Ready to buy?
Monoprice Power Cord - NEMA 5-15P to IEC 60320 C13, 18AWG, 10A/1250W, 125V, 3-Prong, 6ft, Blue is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Does Dual-Channel RAM Matter for Local LLM Inference?
- Best Controller for Fighting Games on PC in 2026: HORI HORIPAD vs 8BitDo Pro 2 vs DualSense
- Best Steam Deck Dock and 4K Monitor Setup for TV-Mode Gaming in 2026
- Pentium II/III LAN Party Build Brand Profile: Why Creative and 3dfx Defined the Era
- Can a Ryzen AI Max+ 395 Mini-PC With 128GB Run Big LLMs? The r/LocalLLaMA Question
- Raspberry Pi 4 8GB in 2026: Still the Best Home-Lab SBC for Under $80
- Best CPU Cooler for a Ryzen 7 3700X: Air vs 240mm AIO in 2026
- Best Parts for a Long-Context Local LLM Workstation in 2026
- Raspberry Pi 4 8GB as a 2026 Home Server: What Actually Runs Well
- RTX PRO 6000 vs RTX 5090 for Local 70B LLMs: 96GB vs 32GB
- Voodoo 5 6000 Verdict: What the Lab Established and Tests Next
- Best Budget SATA SSD for a Steam Library in 2026: BX500 vs 870 EVO vs SN550
- Windows 98 vs Windows 2000 for a GeForce-Era Retro Gaming Build
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Best Budget Streaming Setup for Beginners in 2026
- CRT PC Monitors for Retro Gaming: 2026 Buying Guide
- Best Budget Gaming Monitor in 2026: 5 Picks From 1440p to 4K
- Best Wired Gaming Headset Under $50 for PC and Console in 2026
- Building a 1998 Voodoo2 SLI Gaming PC With CF Storage in 2026
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Wooden CPU Cooler: How to Build One and What to Expect
- How to run Qwen 3 14B on Apple M4 Pro
- UT99 OldUnreal 469 Patch in 2026: Migration, Servers, and Period-Correct Controller Mapping
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090