Monoprice Power Cord - NEMA 5-15P to IEC 60320 C13, 18AWG, 10A/1250W, 125V, 3-Prong, 8ft, Black
Bottom line: The Monoprice Power Cord ($4.39 on Amazon as of 2026-10-21 04:23 UTC): 8ft length reaches from a floor power strip to a desk or rack; main trade-off: NEMA 5-15P plug and 125V rating limit it to North American outlets.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 8ft length reaches from a floor power strip to a desk or rack
- ✓ 18AWG SVT cord rated 10A / 1250W at 125V for desktop PSUs and monitors
- ✓ Standard C13 end fits the C14 inlet on most PC power supplies and monitors
- ✓ Three-prong NEMA 5-15P plug carries the ground to your equipment
- ✓ Covered by Monoprice Lifetime Warranty on cables
Cons
- ✗ NEMA 5-15P plug and 125V rating limit it to North American outlets
- ✗ 10A / 1250W limit rules out gear that needs a heavier-duty cord
- ✗ Won't fit C7 figure-8 or C5 cloverleaf inlets on consoles and laptop bricks
- ✗ 8ft can leave extra slack in compact desk or rack setups
Manufacturer description
The Monoprice Power Cord connects a standard NEMA 5-15P three-prong wall outlet to any device with an IEC 60320 C14 inlet. That is the socket on most desktop PC power supplies, CRT and LCD monitors, and many rack-mount and audio devices. It is a plain replacement cord for restoring a retro PC, replacing a lost cord on a vintage monitor, or tidying a home lab. At 8 feet, the cord reaches from a floor-level power strip up to a desk or behind a rack without an extension. It uses 18AWG conductors inside an SVT jacket and is rated for 10A at 125V, or 1250W, which covers typical desktop tower…
SpecPicks Verdict
SpecPicks scored Monoprice Power Cord using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. Monoprice's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this cord fit my retro PC power supply or old CRT monitor?
It fits if the device has an IEC 60320 C14 inlet: three flat pins in a recessed socket, the standard on most desktop PSUs and many monitors. It will not fit two-pin C7 or three-lobe C5 inlets.
How much power can this Monoprice cord handle?
It is rated for 10A at 125V, or 1250W. That covers typical desktop tower power supplies, monitors and peripherals.
How long is the cord and what gauge is it?
The cord is 8 feet long with 18AWG conductors in an SVT jacket, and it is black.
Can I use this cord outside North America or on 230V power?
It has a NEMA 5-15P plug, the three-prong North American type, and is rated for 125V. It will not plug into outlets in other regions. Check the product listing before using it on any other voltage.
Does the Monoprice power cord come with a warranty?
Yes. Monoprice offers a Lifetime Warranty on all its cables. Check the product listing for the current warranty terms and how to make a claim.
Key Features
- Heavy duty NEMA 5-15P to IEC-320-C13
- Buy with confidence: with Monoprice Lifetime Warranty on all cables, you can rest assured we stand behind our products and our customers
- Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices.
- Service & Support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions
Full Specifications
| Brand | Monoprice |
|---|---|
| Color | Black |
| Gauge | 18 |
| Voltage | 125 volts |
| Wattage | 1250 watts |
| Amperage | 10 A |
| Plug Type | Type B |
| Unit Count | 8 Feet |
| Item Length | 96 inches |
| Plug Format | Type B |
| Model Number | 135121 |
| Input Current | 10 A |
| Built-In Media | Power Cord |
| Mfr Part Number | 135121 |
| Connector Gender | Male-to-Female |
| Number of Outlets | 1 |
| Service & Support | you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions |
| Buy with confidence | with Monoprice Lifetime Warranty on all cables, you can rest assured we stand behind our products and our customers |
| Number Of Conductors | 3 |
| Warranty Description | Lifetime Warranty |
Ready to buy?
Monoprice Power Cord - NEMA 5-15P to IEC 60320 C13, 18AWG, 10A/1250W, 125V, 3-Prong, 8ft, Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Sound Blaster Audigy FX Install Guide for Win98 SE Period-Correct Builds
- Best Wireless Controller for PC Gaming in 2026
- Complete Ollama Installation Guide for 2026: Hardware & Software Setup
- Best Raspberry Pi Alternative for Klipper in 2026 (and When the Pi Still Wins)
- Windows NT Now Boots on the Nintendo GameCube: What the Homebrew Port Actually Runs
- Period-Correct Pentium III + GeForce 4 Ti Build for 2001-2003 Gaming
- Crucial BX500 vs Samsung 870 EVO: Best Budget SATA SSD for Upgrades
- Raspberry Pi Projects for Teens: Best Builds 2026
- GPT-5.6 Sol Nearly Matches Fable 5 at a Third the Cost: The Local-Rig Angle
- Best Internal SSD for Gaming PC Build in 2026
- Bigme Color E-Ink Monitor: 60 FPS and 4096 Colors Explained
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive: The CompactFlash + IDE Workflow
- Building a CompactFlash + IDE Storage Stack for Win98 and WinXP Retro Rigs
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- Best CPU Cooler for AM4 Ryzen Overclocking in 2026
- Best Raspberry Pi Alternative in 2026: Pi vs Orange Pi vs Radxa
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
- Best Retro Emulator Consoles 2026: AMD GPU Buying Guide
- Crucial BX500 vs Samsung 870 EVO: Best SATA SSD for Game Loads
- AI-Driven Win9x Driver Install: How Vision-LLMs Tame Vintage Installers (2026)
- Best Wireless Productivity Keyboards for Home Office in 2026
- Best 27-inch 4K Monitor for PC and Console: Odyssey vs KOORUI
- RTX 5080 vs RTX 4080 for LLM Inference: Same 16GB, Different Answer (2026)
- Intel Axes BigDL/IPEX-LLM: Where Local Inference Goes Now
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090