Skip to main content
Funut Compatible with MacBook Pro Keyboard Cover Touch Bar 13 inch Silicone Keyboard Skin and 15 inch Premium Ultra Thin TPU 2019-2016 (Model A2159 A1989 A1990 A1706 A1707) Skin Protector - Nebula
FUNUT

Funut Compatible with MacBook Pro Keyboard Cover Touch Bar 13 inch Silicone Keyboard Skin and 15 inch Premium Ultra Thin TPU 2019-2016 (Model A2159 A1989 A1990 A1706 A1707) Skin Protector - Nebula

Bottom line: The Funut Compatible with MacBook Pro Keyboard Cover Touch Bar 13 inch ($7.59 on Amazon as of 2026-10-07): 0.12mm thickness keeps typing feel close to a bare keyboard; main trade-off: only fits A2159, A1989, A1706, A1990 and A1707 Macs.

$7.59

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $7.59 Compare to similar accessories

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 0.12mm thickness keeps typing feel close to a bare keyboard
  • ✓ Covers the Touch Bar strip, not just the key deck
  • ✓ Individually molded keys hold the layout instead of bunching
  • ✓ Washable in soapy water and reusable, not disposable

Cons

  • ✗ Only fits A2159, A1989, A1706, A1990 and A1707 Macs
  • ✗ No fit for 2020 or newer Magic Keyboard MacBook Pros
  • ✗ Silicone can trap crumbs underneath if never removed
  • ✗ Tinted Nebula finish obscures backlight bleed-through

Manufacturer description

The FUNUT keyboard cover is a 0.12mm silicone skin cut for Touch Bar-era MacBook Pro models, covering the 13-inch A2159, A1989 and A1706 alongside the 15-inch A1990 and A1707 from the 2016 through 2019 generations. Every key is individually molded, so the skin drops into the low-profile butterfly layout and stays put instead of shifting while you type. That thinness matters on these machines: at roughly a tenth of a millimeter, the barrier between your fingers and the keys stays thin enough that key travel still feels close to bare, and the Touch Bar strip remains covered rather than…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Funut Compatible with MacBook Pro Keyboard Cover Touch Bar 13 inch… using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. FUNUT's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Which MacBook Pro models does this keyboard cover fit?

It fits the 13-inch MacBook Pro A2159, A1989 and A1706 and the 15-inch A1990 and A1707, all Touch Bar models released 2016 through 2019. Check the model number etched on the underside of your Mac against that list before ordering.

Does it cover the Touch Bar too?

Yes. This is the Touch Bar version of the skin, so the cover extends over the Touch Bar strip as well as the key deck. It is listed as resistant across both the keyboard and touch bar area.

Will it make typing feel mushy?

The skin is 0.12mm thick, which FUNUT specifies to minimize typing interference on the low-profile keyboard. Every key is individually molded rather than being one flat sheet, so keys stay distinct under your fingers.

Can I wash it when it gets dirty?

Yes. It is waterproof and washable in soapy water, then reusable once dry. Let it dry completely before putting it back on the keyboard, and do not reseat a damp cover against the machine.

Key Features

  • Perfectly fit for Older MacBook Pro Keyboard Cover：Macbook Pro 13 inch A2159 A1989 A1706 and Macbook Pro 15 inch A1990 A1707 with TouchBar Release 2019, 2018, 2017, 2016. Spill-proof silicone keyboard skin fit snugly onto the low-profile keyboard, that adds an elegant touch to your MacBook.
  • Full Protection: macbook keyboard cover provide for your MacBook keyboard against dust, liquid spill (coffee/beer/milk), key wear, contaminates and more. This keyboard protector safeguards the MacBook Pro from damage so your Mac stays as good as new longer!
  • Ultra-Thin Design: Ultra thin MacBook Pro 13 keyboard cover is only 0.12mm thickness to minimize typing interference. , fits your MacBook Pro 13 / Pro 15 touch bar version like the original, just stay in place for comfortable typing.Every key is individually molded on silicone for a long lasting professional look.
  • Washable & Reusable: Waterproof and dustproof, environmentally protective and ideal for resistance against your keyboard & touch bar, What's more, MacBook keyboard cover it can be washed by soapy water and make it as clean as a new one. Just put it back on the keyboard when it get dry enough.
  • Compatible with Models Macbook Pro 13 inch A2159, A1989, A1706 MUHN2LL/A, MUHQ2LL/A, MUHP2LL/A, MUHR2LL/A, MV962LL/A, MV992LL/A, MV972LL/A, MV9A2LL/A, MR9Q2LL/A, MR9R2LL/A, MPXV2LL/A, MPXX2LL/A, MPXW2LL/A, MPXY2LL/A, MNQF2LL/A, MNQG2LL/A, MLH12LL/A, MLVP2LL/A. Pro 15 inch A1990, A1707 MV902LL/A, MV922LL/A, MV912LL/A, MV932LL/A, MR932LL/A, MR942LL/A, MPTR2LL/A, MPTU2LL/A, MPTT2LL/A, MPTV2LL/A, MLH32LL/A, MLW72LL/A, MLH42LL/A, MLW82LL/A

Full Specifications

SizeMacBook Pro 13 inch, MacBook Pro 15 inch
BrandFUNUT
ColorNebula
ThemeSpace
PatternSolid
MaterialSilicone
Unit Count1 Count
CompatibilityMac
Compatible DevicesMacBook Pro
Enclosure MaterialSilicone
Additional FeaturesDustproof, Waterproof
Item Dimensions L x W8.54"L x 3.58"W
Compatible Phone ModelsMacBook Pro A2159, A1989, A1706, A1990, A1707

Ready to buy?

Funut Compatible with MacBook Pro Keyboard Cover Touch Bar 13 inch Silicone Keyboard Skin and 15 inch Premium Ultra Thin TPU 2019-2016 (Model A2159 A1989 A1990 A1706 A1707) Skin Protector - Nebula is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $7.59

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Related Accessories

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Funut Compatible with MacBook Pro Keyboard Cover Touch Bar 13 inch Silicone Keyboard Skin and 15 inch Premium Ultra Thin TPU 2019-2016 (Model A2159 A1989 A1990 A1706 A1707) Skin Protector - Nebula
$7.59
View on Amazon →