Antrader
Antrader 5-Pack 3010 12V DC Brushless Cooling Fan 30x30x10mm for 3D Printer
Bottom line: The Antrader 5-Pack 3010 12V DC Brushless Cooling Fan 30x30x10mm ($9.49 on Amazon as of 2026-10-08): 9000 RPM +/-10% spindle speed pushes 2.8 CFM through tight V6/V5 hotend ducts; main trade-off: listing contradicts itself: features claim both sleeve bearing and dual ball bearing.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 9000 RPM +/-10% spindle speed pushes 2.8 CFM through tight V6/V5 hotend ducts
- ✓ Rated 24 dBA, quiet enough to sit beside a printer or desktop
- ✓ 2-pin PH2.5 terminal connector matches common 3D printer control boards
Cons
- ✗ Listing contradicts itself: features claim both sleeve bearing and dual ball bearing
- ✗ 12V DC only, so 5V or 24V boards need a converter or different fan
- ✗ 2.8 CFM airflow is thin for anything beyond small-component spot cooling
- ✗ 0.15A draw per fan adds up if you run all five off one board header
SpecPicks Verdict
SpecPicks scored Antrader 5-Pack 3010 12V DC Brushless Cooling Fan 30x30x10mm using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Antrader's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Mini brushless 3010 DC 12V fan, sleeve-bearing design cooling cooler
- Plastic construction 5 blade fan. Dual Ball Bearing; Speed: 9000 + -10% RPM; Wind Speed: 2.5M/S, Wind Volume: 2.8CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.15A; Noise: 24DBA
- 30 x 30 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 30mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation; electronic cooling fans and so on
Full Specifications
| Brand | Antrader |
|---|---|
| Model | AZ18072705-AZ18092609 |
| Voltage | 12 volts |
| Wattage | 1.2 watts |
| Material | Plastic |
| Dimensions | 30 x 30 x 10mm |
| Unit Count | 5 Count |
| Noise Level | 24 db |
| Part Number | AZ18072705-AZ18092609 |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 5 |
| Air Flow Capacity | 2.8 cfm |
| Compatible Devices | Printer |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 9000 rpm |
| Item Dimensions L x W x H | 1.18"L x 0.39"W x 1.18"H |
| 30 x 30 x 10mm Fans. Connector | 2 Terminal Connector with 2pin-ph2.5 |
| DC Brushless Cooling Fan, Rated Voltage | DC 12V, Current: 0.15A; Noise: 24DBA |
| Full listing title | Antrader 5-Pack 3010 12V DC Brushless Cooling Fan 30x30x10mm for 3D Printer | Low Noise Ventilation Fan with 2Pin Connector for Extruder Hotend V6 V5 CPU Humidifier |
Ready to buy?
Antrader 5-Pack 3010 12V DC Brushless Cooling Fan 30x30x10mm for 3D Printer | Low Noise Ventilation Fan with 2Pin Connector for Extruder Hotend V6 V5 CPU Humidifier is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc A770 LLM Performance: Local Inference Guide
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- Qwen 35B-A3B on a 12GB RTX 3060 with llama.cpp: Setup and Measured Speed
- CompactFlash as a Boot Disk: A Silent, Reliable Drive for Your Win98 Retro Rig
- 20GB Homelab Memory Left: What to Add Next
- Anthropic's 2GW AMD Deal: Should You Still Run Local?
- Best Sim Racing Wheel for PC and Console in 2026
- 1440p Gaming PC Build 2026: Cost, Parts, FPS
- Sound Blaster Audigy 2 ZS vs Audigy FX for Windows XP Gaming (2026)
- Best CPU Cooler for AM5 Ryzen 9 Overclocking (2026)
- GameSir G7 SE vs HORIPAD Pro: Best Wired PC Controller
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Best Gaming GPUs for 1080p High-Refresh Rate (2026)
- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Raspberry Pi 4 8GB as a Jellyfin Media Server: Real Limits
- Raspberry Pi Dual Monitor Setup: Driving Two 4K Displays in 2026
- Handheld Gaming PC Near Me: Where to Buy in 2025
- Best CPU for Gaming in 2026: 5 Picks Tested
- Building a Period-Correct Windows 98 Gaming PC in 2026: Parts, Pitfalls, and Driver Archaeology
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- Best Budget AM4 Build for Local LLM Inference in 2026
- Period-Correct Windows 95 Pentium MMX Build Guide: 3dfx Voodoo 1, AWE32, and Authentic 1996 Gaming
- GameSir G7 SE vs 8BitDo Pro 2: Best Wired-vs-Wireless PC Controller
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090