Spurtar
Spurtar Silicone Soldering Mat 17.7" x 11.8"
Bottom line: The Spurtar Silicone Soldering Mat 17.7" x 11.8" ($9.99 on Amazon as of 2026-10-21 04:15 UTC): Rated to 932°F (500°C), so a hot iron tip leaves no marks; main trade-off: listing gives no surface resistance spec for its anti-static claim.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Rated to 932°F (500°C), so a hot iron tip leaves no marks
- ✓ 124 numbered-style screw positions keep teardown order intact
- ✓ 3 lidded parts boxes plus 7 storage areas for small components
- ✓ 4 magnet areas hold tiny screws and steel parts in place
- ✓ 17.7 x 11.8 in surface fits a board and tools side by side
Cons
- ✗ Listing gives no surface resistance spec for its anti-static claim
- ✗ No grounding snap or cord listed for wrist strap connection
- ✗ 932°F ceiling sits below the max output of some hot air stations
- ✗ Fixed compartment layout cannot be rearranged for odd-sized parts
Manufacturer description
The Spurtar Silicone Soldering Mat gives you a heat-resistant, organized surface for electronics repair and soldering. It is rated to 932°F (500°C), so a hot soldering tip can touch it without leaving marks. Flux and solder residue wipe off cleanly. At 17.7 x 11.8 inches, the mat holds a circuit board and your tools without taking over the whole bench. The layout is built to keep small parts under control. It has one large circuit board area, two tool-supply zones, 124 screw positions, 42 spare unit slots, three parts boxes with covers, four magnet areas and seven more storage areas. When…
SpecPicks Verdict
SpecPicks scored Spurtar Silicone Soldering Mat 17.7" x 11.8" using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. Spurtar's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can I rest a hot soldering iron directly on this mat?
Spurtar rates the silicone to 932°F (500°C) and says hot soldering tips leave no marks. If you use a hot air rework station, keep it set below 932°F when pointing it at the mat.
How big is the Spurtar soldering mat?
It measures 17.7 x 11.8 inches. That leaves room for a circuit board location area and tool zones without taking up your whole workbench.
How many screws and parts can it organize?
It has 124 screw positions, 42 spare unit slots, 3 parts boxes with covers, 7 parts storage areas, 4 magnet areas and 2 tool-supply areas.
Is this mat ESD safe for sensitive electronics?
The listing describes the mat as anti-static, but it does not give a surface resistance rating or a grounding connection. For static-sensitive boards, also use a separately grounded wrist strap, and check the product listing for current ESD details.
How do I clean flux and solder off the mat?
Spurtar says the silicone wipes clean easily and leaves no marks. The mat is made from non-toxic, environment-friendly materials.
Key Features
- 【 Heat Resistant Solder M 】The soldering mat can reach 932°F (500°C) temperature, with no marks after having hot soldering tips on it. It is also very easy to wipe clean, leaving no marks.
- 【 Excellent Silicone Repair Mat 】It includes 1X Large circuit board location area; 2X Tool-supplies area; 124 Screws position, 42 Spare units; 3X Parts box with cover; 4X magnet areas; 7X parts storage area. Plenty of areas to keep the parts in and more storage space for tools.
- 【 Safe & Environmental 】This large soldering mat is made from environment-friendly, premium-quality, non-toxic materials. Safe for the environment and safe for the family.
- 【 Large Size Mat 】 Measuring 17.7'' x 11.8'', this soldering pad provides ample space for your repair projects without taking up too much workspace.
- 【 Widely Application 】Good quality soldering stations mat are very useful for small repairs & soldering project. Ideal for phone repair and circuit board repairs, soldering electronics assembly, such as computers, phones, cameras, and sports watches.
Full Specifications
| Brand | Spurtar |
|---|---|
| Display | digital |
| Unit Count | 1.0 Count |
| Display Type | digital |
| Model Number | 160 |
| Number of Channels | 1 |
| Included Components | 1X Large circuit board location area; 2X Tool-supplies 124 Screws position, 42 Spare units; 3X Parts box with cover; 4X magnet areas; 7X parts storage area. |
| Temperature Stability | 932 Degrees Fahrenheit |
| Manufacturer Part Number | 160 |
| Item Dimensions D x W x H | 0.28"D x 11.81"W x 17.72"H |
| Global Trade Identification Number | 00696177829126 |
| Full listing title | Spurtar Silicone Soldering Mat 17.7" x 11.8", Large Premium Repair Mat Heat Resistant 932°F for Soldering Iron, Magnetic Anti Static Electronic Work Mat for Phone Laptop Watch Repair |
Ready to buy?
Spurtar Silicone Soldering Mat 17.7" x 11.8", Large Premium Repair Mat Heat Resistant 932°F for Soldering Iron, Magnetic Anti Static Electronic Work Mat for Phone Laptop Watch Repair is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- gpt-oss 20B vs Phi-4 14B on a 12 GB GPU: Which One Actually Fits?
- Run Soofi S 30B Locally: What a 12GB RTX 3060 Can Actually Do
- NVMe vs SATA SSD for Local LLM Model Libraries in 2026
- How Many CPU Cores Does a Local-LLM Rig Actually Need?
- Adafruit's 2026 I2S Microphone Guide Brings Real-Time Audio to CircuitPython
- The Hackaday Europe 2026 Retro PC Build: What They Actually Built and Why It Matters
- Best SSDs and Storage Adapters for Retro PC Builds in 2026
- Raspberry Pi AI Projects: A 2025 Builder's Guide
- One Monitor, Two PCs: Monitor KVM vs Dual-Input for a Gaming Rig and AI Box
- Arc A770 16GB vs RTX 3060 12GB for Local Llama 3
- Raspberry Pi Projects for Home Automation in 2025
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming + Streaming PC
- Best GPU for Running Llama 3 8B Locally Under $350 (2026)
- Ryzen 5 2600 vs Ryzen 9 3900X: Do 12 Cores Buy CPU-Only 8B Inference?
- Build a Self-Hosted Security Camera on a Raspberry Pi 4 8GB in 2026
- Best Raspberry Pi 4 Starter Kit Bundle for First-Time Robotics Builders in 2026
- Silent SSD-Style Windows 98 Build: CompactFlash Boot + IDE Adapter Workflow
- Secluso: Private DIY Home Security on a Raspberry Pi 4
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5070
- Ryzen AI Max+ 395 Motherboard Guide: What You Can Upgrade
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
- Build or Buy a Gaming PC in 2026? The Real Tradeoffs
- Glide vs OpenGL vs Direct3D: The PC Gaming API War 1996-2003, Benchmarked
- Qwen3.6-35B-A3B vs Gemma4-26B-A4B: Which MoE Fits a 12GB RTX 3060
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090