GDSTIME 80mm EC Axial Fan AC 110V 120V 220V Brushless Cooling 80mm x 25mm
Bottom line: The GDSTIME 80mm EC Axial Fan AC 110V 120V 220V Brushless Cooling 80mm x: Universal 90-270VAC input covers 110V, 120V, 220V and 240V outlets; main trade-off: sleeve bearing wears faster than ball bearing in hot vertical mounts.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Universal 90-270VAC input covers 110V, 120V, 220V and 240V outlets
- ✓ Ships complete: fan grill, screws, nuts, wire clip and US plug cord
- ✓ Inline switch on the cord lets you cut power without unplugging
- ✓ Draws just 2.0W at 2800rpm for always-on retro case ventilation
- ✓ Sleeve bearing rated 40,000 hours, mounts flat or upright
Cons
- ✗ Sleeve bearing wears faster than ball bearing in hot vertical mounts
- ✗ 2800rpm fixed speed with no PWM or fan-controller support
- ✗ 80x80x25mm frame only fits standard 80mm cutouts
- ✗ No published airflow (CFM) or noise (dBA) rating in the listing
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for GDSTIME 80mm EC Axial Fan AC 110V 120V 220V Brushless Cooling 80mm x…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Universal 90-270VAC input covers 110V, 120V, 220V and 240V outlets"; the main trade-off is "Sleeve bearing wears faster than ball bearing in hot vertical mounts". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Package include: 1 Piece fan include fan grill and mounting screws & nuts; 1x Wire Clip; 1x US Plug Power Cord
- This fan can easily run from 90 to 270VAC current without any trouble.
- 80x80x25mm AC 110V 115V 120V 220V 240V; Speed:2800rpm; 2.0W
- The motor runs on a DC voltage, but with a normal AC supply. DC motors already have low power consumption but if used in an AC application
- Sleeve bearing have a lifespan of 40,000 hours and allows the fans to be laid flat or stand upright.
Full Specifications
| Brand | GDSTIME |
|---|---|
| Voltage | 120 volts_of_alternating_current |
| Wattage | 2 watts |
| Material | Plastic |
| Dimensions | 80x80x25mm |
| Noise Level | 31 db |
| Compatibility | Switch |
| Cooling Method | Air |
| Package include | 1 Piece fan include fan grill and mounting screws & nuts; 1x Wire Clip; 1x US Plug Power Cord |
| Compatible Devices | Server |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 2800 rpm |
| Full listing title | GDSTIME 80mm EC Axial Fan AC 110V 120V 220V Brushless Cooling 80mm x 25mm | AXIAL 8025, Muffin Fan, 80V-240V, 2.5W Low Power, ON/OFF Switch, for Incubators, Tube Amp, DIY Ventilation Exhaust Projects |
Benchmark data for other processors
Ready to buy?
GDSTIME 80mm EC Axial Fan AC 110V 120V 220V Brushless Cooling 80mm x 25mm | AXIAL 8025, Muffin Fan, 80V-240V, 2.5W Low Power, ON/OFF Switch, for Incubators, Tube Amp, DIY Ventilation Exhaust Projects is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Anthropic Raises $65B Series H Near a Trillion-Dollar Valuation: What It Means for Local-AI Builders
- Best Gaming Webcam and Streaming Setup in 2026
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- AMD Revives Zen 2: Ryzen 7 4700LE in $800 RTX 3050 Prebuilts
- Best Racing Wheels and Controllers for Sim Racing in 2026
- Jellyfin on a Raspberry Pi 4 8GB in 2026: The 4K Transcode Reality Check
- Intel Arc Pro B60 Price: Is $999 Worth It in 2025?
- Ollama on Intel + AMD via IPEX-LLM: Docker Compose Guide
- Best Gaming Monitor for 2026: 5 Picks from 1440p to 4K
- Best CPU Cooler for High-TDP Builds (2026)
- What Handheld Console Should I Buy in 2026? A Decision Framework
- Best Budget GPU for RPCS3 PS3 Emulation in 2026
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Gaming Build
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Your Game Library (2026)
- Best Mini-ITX Case for a Small Form Factor Gaming PC in 2026
- Best 1440p Monitor for the RTX 3060 12GB (2026)
- Best Cheap Raspberry Pi Alternatives in 2025
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- MTP Decoding on RTX 3060 12GB: When Multi-Token Prediction Helps (and Hurts)
- AMD Radeon RX 9070 GRE Review: Thoroughly Midrange
- Best Controller for Retro Emulation on PC: 8BitDo, GameSir, DualSense
- Cloudflare Swaps Its Blanket AI Bot Block for Granular Crawler Controls
- VibeThinker-3B on an RTX 3060 12GB: Reasoning in 3 Billion Params
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090