Skip to main content
Gigabit PoE+ Injector Powerline Network Adapter IEEE 802.3af/at | 10/100/1000Mbps,48V, 15.4W (PoE) or 30W (PoE+), Up to 100 M (328 ft) Range, Product Meets UL Certified Standards
ThePoEstore

ThePoEstore Gigabit PoE+ Injector Powerline Network Adapter IEEE 802.3af/at

Bottom line: The Gigabit PoE+ Injector Powerline Network Adapter IEEE 802.3af/at: Up to 30W PoE+ (802.3at) or 15.4W PoE (802.3af) at 48V; main trade-off: single output port, so each PoE device needs its own injector.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Up to 30W PoE+ (802.3at) or 15.4W PoE (802.3af) at 48V
  • ✓ Full 10/100/1000Mbps passthrough keeps gigabit links at full speed
  • ✓ Adds PoE to an existing non-PoE switch without replacing it
  • ✓ Power and data over one Ethernet cable up to 100 m (328 ft)
  • ✓ Auto-sensing output with built-in power supply, no setup required

Cons

  • ✗ Single output port, so each PoE device needs its own injector
  • ✗ 30W ceiling rules out 802.3bt (PoE++) devices that need more power
  • ✗ Not for cameras with separate data and power inputs
  • ✗ Red LED under load is normal but can look like a fault

Manufacturer description

The ThePoEstore Gigabit PoE+ Injector adds Power over Ethernet to a network you already have. Run your existing switch or router into the 1 Gigabit Ethernet input port, then connect your camera, VoIP phone or wireless access point to the PoE+ output port. One Ethernet cable then carries both data and power to the device. The injector meets the IEEE 802.3af and 802.3at standards. It supplies 15.4W to standard PoE devices and up to 30W to PoE+ devices, all at 48V. Auto-sensing detects what the connected device needs, so older 802.3af hardware works alongside newer PoE+ gear. Data runs at full…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Gigabit PoE+ Injector Powerline Network Adapter IEEE 802.3af/at, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Up to 30W PoE+ (802.3at) or 15.4W PoE (802.3af) at 48V"; the main trade-off is "Single output port, so each PoE device needs its own injector". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this injector power my PoE+ wireless access point?

Yes, if the access point uses IEEE 802.3at (PoE+) or 802.3af and draws 30W or less. The injector supplies up to 30W at 48V and auto-senses the power level the device needs.

Does it slow down my gigabit connection?

No. Both the input and output ports are Gigabit Ethernet and support 10/100/1000Mbps, so data passes through at your network's full speed.

How far from the injector can I put my camera?

Up to 100 meters (328 feet) of Ethernet cable between the injector and the powered device. That one cable carries both data and power.

Can I use it with a security camera that has its own power jack?

Only if the camera also accepts power through its Ethernet port. The injector supports PoE devices only and does not work with cameras that use separate data and power connections.

Why is the red light on?

That is normal. The green LED shows the unit has power, and the red LED turns on when it is supplying power to a connected load. Make sure your device's power draw stays at or below 30W.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Convert non-PoE Devices to PoE Devices: Enable PoE functionality without replacing existing non-PoE switches or devices
  • Efficient and Reliable: Auto-sensing technology delivers up to 30W to the device, with backwards compatibility for 802.3af PoE devices, ensuring optimal power delivery at all times
  • High-Quality Design: Featuring a 1 Gigabit Ethernet port input and a PoE+ Gigabit Ethernet port output, this PoE switch power over adapter is built to last
  • PoE Power Supply: This gigabit PoE plus injector supplies a PoE device with PoE (15.4W) or PoE plus (30W) power, Integrated power supply
  • Easy Installation: This compact and cost-effective Gigabit PoE/PoE+ injector is plug-and-play, requiring no configuration. Simply connect your PoE network device and you are ready to use
  • Important Usage Notes: This product only supports PoE devices and PoE cameras, and does not support cameras with separate data and power supply. The product lights up green after power is turned on, and it is normal for the red light to turn on when outputting load. Please note that your equipment power requirement should not exceed 30W

Full Specifications

BrandThePoEstore
ColorPoE30W-Black-1GB
ConnectivityWireless
Model Number30W
CompatibilitySwitch
Built-In Media1 x AC Cord, 1 x PoE Body, 1 x Product Manual
Item Type NameInjector
Connection TypeWireless
Mfr Part NumberThePoE2020
Number of Items1
PoE Power SupplyThis gigabit PoE plus injector supplies a PoE device with PoE (15.4W) or PoE plus (30W) power, Integrated power supply
Compatible DevicesInternet Protocol Camera
Data Link ProtocolIEEE 802.3
Data Transfer Rate1000 Megabits Per Second
Hardware InterfaceEthernet
High-Quality DesignFeaturing a 1 Gigabit Ethernet port input and a PoE+ Gigabit Ethernet port output, this PoE switch power over adapter is built to last
Warranty Description3 Year Manufacturer
Extended Range CapabilityDelivers power and data over a single Ethernet cable up to 100 meters (328 feet), eliminating the need for separate power outlets near your devices
Item Dimensions L x W x H4.76"L x 1.97"W x 1.42"H
Convert non-PoE Devices to PoE DevicesEnable PoE functionality without replacing existing non-PoE switches or devices
Full listing titleGigabit PoE+ Injector Powerline Network Adapter IEEE 802.3af/at | 10/100/1000Mbps,48V, 15.4W (PoE) or 30W (PoE+), Up to 100 M (328 ft) Range, Product Meets UL Certified Standards

Ready to buy?

Gigabit PoE+ Injector Powerline Network Adapter IEEE 802.3af/at | 10/100/1000Mbps,48V, 15.4W (PoE) or 30W (PoE+), Up to 100 M (328 ft) Range, Product Meets UL Certified Standards is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro Networking Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →