Superbat DIN to HD SDI BNC Cable 1ft
Bottom line: The Superbat DIN to HD SDI BNC Cable 1ft: Belden 1855A 75 ohm coax rated 3G/6G/12G HD-SDI for stable 4K signal runs; main trade-off: 1ft only, too short for camera-to-recorder runs beyond the same rig.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Belden 1855A 75 ohm coax rated 3G/6G/12G HD-SDI for stable 4K signal runs
- ✓ 23 AWG solid bare copper conductor with 95% tinned copper braid shield coverage
- ✓ DIN 1.0/2.3 male to BNC male fits Blackmagic URSA, Canon C300, Sony FS7, ARRI Alexa
- ✓ 1ft run keeps Video Assist, HyperDeck and SmallHD monitor hookups clutter-free
Cons
- ✗ 1ft only, too short for camera-to-recorder runs beyond the same rig
- ✗ Replacement coverage listed at just 1 month
- ✗ Other lengths not stocked; you must email the manufacturer to order one
- ✗ PVC jacket, not plenum-rated or armored for permanent in-wall installs
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Superbat DIN to HD SDI BNC Cable 1ft, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Belden 1855A 75 ohm coax rated 3G/6G/12G HD-SDI for stable 4K signal runs"; the main trade-off is "1ft only, too short for camera-to-recorder runs beyond the same rig". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Belden 1855A 3G/6G/12G HD-SDI Low Loss Serial Digital Video Cable | 1.0/2.3 DIN Male to BNC Male, Black 12inch/ 1ft
- cable:75 ohm Belden 1855A HD SDI Cable - Sub-Miniature Precision Broadcast Video Coax Cable 23 AWG solid .023" bare copper conductor, gas-injected foam HDPE insulation, tinned copper braid shield (95% coverage), PVC jacket|the cable which is not only superb in high impedance stability and low return loss but is physically robust and stable and will endure frequent handling and flexing.
- Easier to plug and push | High-speed and 4K stable data transfer | We are a professional manufacturer. If you need other length Cable, please contact us by email.
- This cable is designed for use wherever you need to go from a conventional BNC SDI connection to a camera, patch panel or other devices that uses DIN 1.0/2.3 connectors.Suitable for:Blackmagic Design URSA,BMCC, BMPC. Canon C300, C500. Sony FS5, FS7, FS700, F55, RED EPIC, SCARLET, ARRI Alexa, Amira, SmallHD 502, 702, Atomos Shogun, Odyssey7 or Red One etc. | AJA, Nevion, Harris, MIRANDA, 3COM, CISCO
- Never worry about any security problems. We are confident in the quality of our din to bnc cable and willing to provide 1 MONTHS Replacement. If you unfortunately get a defective one, please contact our customer support.
Full Specifications
| Brand | Superbat |
|---|---|
| Color | 1pcs |
| Gauge | 23 |
| Model | GP-AC-SDI-51 |
| Weight | 3g |
| Frequency | 3 GHz |
| Cable Type | Belden 1855A |
| Item Shape | Round |
| Model Name | Superbat HD SDI Cable |
| Unit Count | 1 Count |
| Item Length | 30.48 centimeters |
| Part Number | GP-AC-SDI-51 |
| Connector Type | Din to Bnc |
| Number of Pins | 4 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | Data Transfer, High Speed |
| Connector Gender | DIN 1.0/2.3 to BNC Male |
| Specification Met | Smpte 259m, 292m, 424m |
| Compatible Devices | Router, Television |
| Full listing title | Superbat DIN to HD SDI BNC Cable 1ft, DIN 1.0/2.3 to BNC Male Cable (Belden 1855A) for Blackmagic BMCC/BMPCC Video Assist 4K Transmissions HyperDeck Kameras |
Ready to buy?
Superbat DIN to HD SDI BNC Cable 1ft, DIN 1.0/2.3 to BNC Male Cable (Belden 1855A) for Blackmagic BMCC/BMPCC Video Assist 4K Transmissions HyperDeck Kameras is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- Best Mechanical Keyboard for Office and Gaming Crossover (2026)
- Intel Arc Pro B60 24GB: The Cheapest 24GB Inference Card Yet?
- Leanstral 1.5 on the RTX 3060 12GB: Open Math and Code on a Budget GPU
- Best SSD for a Local LLM Workstation: NVMe vs SATA Model-Load Latency Tested
- Anthropic Raises $65B Series H Near a Trillion-Dollar Valuation: What It Means for Local-AI Builders
- Ryzen 5 5600G vs Core i7-9700K for a Budget 1080p Gaming Build
- Why PSU Fans Aren't Built for Repairability
- Linux Beats Windows 11 on AMD's Ryzen 9 9950X3D2
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- Ryzen CPU Deals 2026: 5600X, 5800X3D and 9800X3D Price Lines
- Resident Evil Code: Veronica on a CRT — Why It Still Hits Different
- Best Budget GPU for Stable Diffusion and SDXL in 2026
- 16% of Freelance Jobs Are Now AI-Doable: The Local Agent Rig That Runs Them
- SteamOS Boots on Intel Hardware in Community Hack
- 9800X3D Build: RTX 5080 vs 5070 Ti vs 9070 XT at 1440p
- ComfyUI on a 12GB RTX 3060: SDXL and Flux Image Gen Benchmarked
- RTX 5090 Benchmark Comparison: 4K Gaming, AI & Value (2026)
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- Best Gaming Gifts Under $60 in 2026
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Local LLM vs Claude in 2026: What an RTX 3060 12GB Rig Actually Replaces
- Best SSD for a Raspberry Pi 4 Media Server in 2026
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090