SDTC Tech 24-Pin ATX Power Supply Jumper Bridge Tool PSU Test Starter Without Being Plugged Into The Motherboard
Bottom line: The SDTC Tech 24-Pin ATX Power Supply Jumper Bridge Tool PSU Test Starter: Starts any ATX/EPS PSU with no motherboard attached; main trade-off: only bridges PS_ON; shows no voltage or wattage readout.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Starts any ATX/EPS PSU with no motherboard attached
- ✓ Fits both 20-pin and 24-pin power connectors
- ✓ 1007 18AWG wire holds up to repeated bench testing
- ✓ Bench-tests fans, drives, water-cooling loops and miners
Cons
- ✗ Only bridges PS_ON; shows no voltage or wattage readout
- ✗ No load resistor, so some PSUs won't stay powered unloaded
- ✗ Confirms power-on only, won't diagnose a failing PSU
- ✗ Bare bridging plug with no housing or on/off switch
SpecPicks Verdict
SpecPicks scored SDTC Tech 24-Pin ATX Power Supply Jumper Bridge Tool PSU Test… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. SDTC Tech's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 24-Pin ATX/EPS Power Supply Start Up Jumper Bridge Tool is compatible with 20/24 pin connector.
- Test starter allows the PSU to be powered on without being plugged into a motherboard.
- 24-Pin Bridging Connector Plug can run and start up any ATX/EPS power supply by its self.
- The jumper is using 1007 18AWG cable for reliability in long use.
- Often used in assembling/testing PC water cooling systems, BTC Miners, testing lights, fans, hard drives or the power supply itself etc.
Full Specifications
| Brand | SDTC Tech |
|---|---|
| Unit Count | 1 Count |
| Form Factor | ATX |
| Compatibility | PC |
| Connector Type | ATX |
| Cooling Method | Water |
| Number of Items | 1 |
| Compatible Devices | Personal Computer |
Ready to buy?
SDTC Tech 24-Pin ATX Power Supply Jumper Bridge Tool PSU Test Starter Without Being Plugged Into The Motherboard is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget AM4 Build for Local LLM Inference in 2026
- Best Gaming CPUs for 2026: Why the Ryzen 7 9800X3D Leads the Pack
- Samsung 27" 1440p 240Hz Gaming Monitor Drops to $169 in 2026 Deal
- Build a Wireless Fingerprint Door Lock on a Raspberry Pi Zero W
- How to run Qwen 3 32B on NVIDIA GeForce RTX 4090
- Which LLMs Actually Fit on an RTX 3060 12GB in 2026?
- Intel Core Ultra X7 Panther Lake Performance on Linux 7.1
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
- Best Streaming Gear for Game Streamers in 2026: 5 Picks
- Is the RTX 3060 12GB Still Worth It for 1080p and 1440p Gaming in 2026?
- Small Form Factor Gaming PC Build Guide for 2024
- AVX-512 Speeds Linux Software RAID Up to 41% — What It Means for Your Homelab NAS
- RTX 3060 12GB vs Intel Arc B580 for 1080p gaming: FPS per dollar (2026)
- Best Storage Upgrades for Older Gaming PCs in 2026
- GameSir G7 SE vs 8BitDo Pro 2 for PC Gaming: Wired Precision vs Wireless Flexibility
- Inkling: The New US Open-Weights Leader — Can You Run It Locally?
- Claude Sonnet 5 Costs ~$2.29/Task: When an RTX 3060 Rig Breaks Even
- CompactFlash Boot Drive for Windows 98: Transcend CF133 Setup and Benchmarks
- Intel Arc AI Software: oneAPI, OpenVINO & LLM Guide
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- Best AM4 Gaming CPU in 2026: Ryzen 7 5800X vs 3700X vs 3900X vs Intel i7-9700K
- How Many CPU Cores Does a Local-LLM Rig Actually Need?
- DIY Open-Source Photo Frame: Pi Zero 2 W + Immich
- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090