Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS 8-P+PCI-E8-P
Bottom line: The Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS: Covers a full single-GPU build: 24-pin ATX, 4+4 EPS, and two 8-pin PCI-E; main trade-off: extensions add a second connector junction behind the tray.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Covers a full single-GPU build: 24-pin ATX, 4+4 EPS, and two 8-pin PCI-E
- ✓ Thick 18AWG conductors, heavier gauge than most stock PSU cabling
- ✓ Pre-bent layering keeps the 24-pin flat after a 180-degree turn
- ✓ Cable combs included, so no separate purchase to set wire spacing
- ✓ Extension design plugs into any PSU, no pinout matching required
Cons
- ✗ Extensions add a second connector junction behind the tray
- ✗ Adds length to every run, so small-form-factor cases get crowded
- ✗ Blue only in this listing, which limits color-matched builds
- ✗ No 6-pin PCI-E or SATA/Molex extensions in the kit
Manufacturer description
The Formulamod sleeved cable extension kit is the cheap, visible upgrade for a PC build where the stock PSU spaghetti is the only thing letting the window down. The kit ships four extensions: one 24-pin ATX, one 4+4-pin EPS for the CPU header, and two 8-pin PCI-E runs for the GPU, so a single-card build is covered end to end. Each cable uses thick 18AWG wire inside a high-density flexible sleeve, which is the combination you want behind the motherboard tray: stiff enough to hold a shape, pliable enough to route without fighting you. Formulamod's pre-bent design makes the upper-layer wires…
SpecPicks Verdict
SpecPicks scored Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+… using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Formulamod's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these cables work with my power supply?
Yes. These are extensions, not replacement cables, so they plug into the connectors already on your PSU. Formulamod lists them as compatible with all power supplies, which avoids the pinout-mismatch risk of brand-specific custom cables.
What cables are included in the kit?
Four extensions: one 24-pin ATX for the motherboard, one 4+4-pin EPS for the CPU power header, and two 8-pin PCI-E for the graphics card. Cable combs are included for routing and spacing.
What wire gauge are these cables?
18AWG throughout, housed in a high-density flexible sleeve. That is a thicker gauge than the wiring on many stock PSU harnesses, and the sleeve is designed to stay stiff enough to hold a routed shape.
Do these cables stay neat after bending?
That is the point of the pre-bent design. The upper-layer wires are cut slightly longer than the lower-layer ones, so the bundle stays flat and even after a 180-degree bend instead of bowing out at the fold.
Are these cables worth it for a first build?
They are a low-risk cosmetic upgrade for a windowed case: no PSU-specific pinout to verify, and combs in the box. Check the listing for current dimensions and length before ordering.
Key Features
- Including (1) 24-P ATX, (1) 4 + 4P EPS, (2) 8-P PCI-E
- All cables are manufactured with thick 18AWG wires and come in a high-density flexible protective sleeve allowing for a stiff yet adaptable temperament. Comes with several cable combs to cleanly route and organize.
- Premium sleeved cable extension, compatible with all power supplies
- Pre-bent Design: The upper layer cables are slightly longer than the down layer ones, which make the cables remain a perfect neat look after bent 180° .
- Heat-Shrink-Less Cable Design
Full Specifications
| Brand | Formulamod |
|---|---|
| Color | blue |
| Gauge | 18 |
| Model | Fm-NCK1-300 |
| Wattage | 18 watts |
| Cable Type | PCIe, ATX |
| Item Shape | Round |
| Unit Count | 1 Count |
| Item Length | 30 centimeters |
| Part Number | Fm-NCK1-300 |
| Connector Type | 24 Pin ATX, 8 Pin PCIe |
| Number of Pins | 36 |
| Outer Material | Nylon or similar synthetic material |
| Maximum Current | 9.5 A |
| Number of Items | 1 |
| Pre-bent Design | The upper layer cables are slightly longer than the down layer ones, which make the cables remain a perfect neat look after bent 180° . |
| Special Feature | Premium Sleeved & Customizable |
| Connector Gender | Male-to-Female |
| Compatible Devices | PC |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Full listing title | Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS 8-P+PCI-E8-P with Combs for PSU to Motherboard/GPU (Blue) |
Ready to buy?
Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS 8-P+PCI-E8-P with Combs for PSU to Motherboard/GPU (Blue) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 5 5600G vs Ryzen 7 5700X for Budget Gaming in 2026: Which AM4 CPU Wins?
- RTX 5090 vs RTX 4090 at 1080p Competitive: Does the New Flagship Help Esports FPS?
- Best Game Controllers for PC, Retro & Handheld in 2026
- Period-Correct 2001 Pentium III Build: Sound Blaster Audigy Era Synthesis
- Raspberry Pi Dual Monitor Setup: Driving Two 4K Displays in 2026
- How to run DeepSeek-R1 32B on Arc B580
- Open-Source Linux Driver Lands for the ASUS ZenVision Lid OLED
- Build a Raspberry Pi 4 NVMe Jellyfin Homelab Box in 2026
- Best Storage Kit for Archiving a Physical Game Collection in 2026
- Best Storage for a Retro PC Build in 2026
- Ideogram 4.0 Open Weights: Native 2K Image Gen on a 12GB GPU
- Transcend CF133 CompactFlash as a Retro PC Boot Drive: Setup + Gotchas
- Tenstorrent TT-QuietBox 2 (Blackhole) vs RTX 5090: Should LLM Builders Care?
- ASUS ROG Zephyrus G1 OLED RTX 5070 Drops $575 This Week — Is It the Right Buy?
- M5 vs DGX Spark vs Strix Halo vs RTX 6000: AI Workload Guide
- Best Mini PC for Local LLM Inference in 2026
- Best Steam Deck Docked Setup for a 4K Desk in 2026: Dock, Monitor, Storage
- Self-Host Immich on a Raspberry Pi 4 8GB: 2026 Setup + Perf
- Best Budget Streaming Starter Kit for 2026 (Under $200)
- Crucial BX500 vs Samsung 870 EVO vs SanDisk SSD Plus: Best Budget SATA SSD
- Best Budget PC Gaming Upgrades Under $150 in 2026
- Best Gaming Monitor for Console and PC Crossover (2026)
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090