Thermal Pad, 100x100x1.5mm, 6.0 W/mK, Insulated, High Temp Resistant Silicone Pad for IC SSD CPU GPU Heat Sink LED Cooling
Bottom line: The Thermal Pad, 100x100x1.5mm, 6.0 W/mK, Insulated, High Temp Resistant: 6.0 W/mK rating for moving heat between chips and heat sinks; main trade-off: only one thickness (1.5mm); many repads need thinner or mixed sizes.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 6.0 W/mK rating for moving heat between chips and heat sinks
- ✓ 100x100mm sheet cuts to size for multiple memory, SSD or power-component spots
- ✓ Non-conductive and anti-static, so it can touch exposed traces
- ✓ Maker states it will not melt between -40 and 200 C
Cons
- ✗ Only one thickness (1.5mm); many repads need thinner or mixed sizes
- ✗ Listing calls it a paste replacement, but pads fill gaps, not bare chip surfaces
- ✗ Listing does not mention an adhesive backing, so the pad may shift during cooler install
- ✗ Listing does not give pad hardness, which affects how well it compresses
Manufacturer description
The AIYUNNI Thermal Pad is a 100x100x1.5mm silicone sheet rated at 6.0 W/mK. It fills the air gap between a hot component and its heat sink. You cut it to the size you need, so one sheet can cover GPU memory chips, an M.2 SSD controller, laptop power components or a power LED board. The pad does not conduct electricity and is anti-static, so it can sit directly on exposed circuit traces. That makes it a better fit than conductive compounds when you re-pad an older graphics card, a console or a retro PC motherboard. The silicone is soft and flexible enough to fill uneven surfaces. The…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermal Pad, 100x100x1.5mm, 6.0 W/mK, Insulated, High Temp Resistant…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "6.0 W/mK rating for moving heat between chips and heat sinks"; the main trade-off is "Only one thickness (1.5mm); many repads need thinner or mixed sizes". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What thickness is the AIYUNNI thermal pad?
The sheet is 1.5mm thick and 100x100mm wide. Measure the pads you are replacing first. If a pad is too thick, the cooler may not sit fully on the main chip.
Can I use this thermal pad on GPU memory chips or an M.2 SSD?
Yes. The listing names GPUs, SSDs, CPUs and heat sinks as supported uses, and you can cut the sheet to fit each memory chip or controller. Match the thickness to the original pads for proper contact.
Is the pad electrically conductive?
No. The manufacturer describes it as insulating and anti-static, and says contact with electrical traces will not cause damage.
What temperatures can it handle?
The listing gives a range of -40 to 200 C without melting. That is well above normal operating temperatures for GPUs, SSDs and power components.
Can this pad replace thermal paste on my CPU?
The listing says it can, but thermal pads work best where there is a gap between component and cooler. For a bare CPU or GPU chip with a tight-fitting cooler, thermal paste usually gives better contact. Use the pad for memory chips, power components and SSDs.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- EXCELLENT THERMAL CONDUCTIVITY - Upgraded thermal silica gel material with 6.0 W/mK thermal conductivity, our thermal pad greatly improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds.
- SUPER RELIABLE & DURABLE - High temperature performance in -40 ℃ - 200 ℃ will not melt, non-toxic, odorless, anti-corrosion, wear resistant, anti-static, fire retardant, compression, good insulation, contact with any electrical traces wouldn’t result in damage of any sort.
- EASY & CONVENIENT TO USE - Dimension 100x100x1.5mm, the thermal pads can be cut freely according to your needs, perfect to filled contact surfaces gap, a great assistant for both beginners and professionals.
- WIDELY APPLICATION - Perfectly replaces traditional heatsink compound grease paste, great for Control board, motor, electronics, CPU, GPU, Heat Sink, Power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules
- We Committed To Provide Superior Thermal Pads, Easy To Install, Feel Free To Contact Us If There Is Any Issue With Our Thermal Pads.
Full Specifications
| Brand | AIYUNNI |
|---|---|
| Model | AIYUNNI |
| Dimensions | 100x100x1.5mm |
| Unit Count | 1.0 Count |
| Part Number | AIYUNNI-140 |
| Mounting Type | Panel Mount or Chassis Mount |
| Cooler Heatsink Material | Copper |
| Item Dimensions L x W x H | 3.94"L x 3.94"W x 0.06"H |
| Cooler Heatsink Compatibility | Compatible with various computer components and hardware configurations |
Benchmark data for other processors
Ready to buy?
Thermal Pad, 100x100x1.5mm, 6.0 W/mK, Insulated, High Temp Resistant Silicone Pad for IC SSD CPU GPU Heat Sink LED Cooling is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Is the RTX 3060 12GB Still the Best Budget 1080p GPU in 2026?
- Kimi K3 Nears GPT-5.6 at Half the Cost — And What It Means for Home Rigs
- Best 4K Gaming Monitor Under $700 in 2026
- Best Budget 4K Monitor in 2026: SANSUI vs KOORUI vs ASUS TUF
- Best CPU Cooler for AM4 + Ryzen 5000 in 2026
- Best Capture Device for Recording Retro Consoles and Old PCs in 2026
- Best Controller for Retro Emulation on PC: 8BitDo, GameSir, DualSense
- Intel llm-scaler-vLLM 1.4 with Arc Pro B70: Local Inference vs RTX 3060 12GB
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Build a Plex Media Server on a Raspberry Pi 4 8GB in 2026
- Best Noctua and Quiet-Tier CPU Coolers in 2026
- Ryzen 7 5800X vs 5700X for a Dual-Duty Gaming and Local-LLM Build
- Best SATA SSDs for Gaming and Emulation in 2026
- Best Budget Streaming Gear in 2026: 5 Picks to Go Live Cheap
- Best CPU Cooler for AMD Ryzen in 2026
- Run DeepSeek Locally on a 12GB RTX 3060: 2026 Quant Guide
- Best Raspberry Pi Setup for Home Assistant in 2026
- AMD Radeon RX 9070 GRE Review: Thoroughly Midrange
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- Memory Prices Climb as Samsung and SK Hynix Pour $590B Into Chips
- Intel Arc A770 LLM Performance: Local Inference Guide
- R36S Retro Handheld: Real Specs vs. the Hype (2026 Guide)
- Adafruit Ships a Triple LED Matrix Bonnet for the Raspberry Pi
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090