Kinyanco Replacement 3D Analog Joystick for Switch lite and Switch Joy-Con
Bottom line: The Kinyanco Replacement 3D Analog Joystick: Same module fits Switch Lite and standard Joy-Con; main trade-off: no screwdriver, tri-wing bit, or pry tools included.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Same module fits Switch Lite and standard Joy-Con
- ✓ Plastic-and-metal build with the thumb cap pre-attached
- ✓ 3g per stick, so no added weight or balance change
Cons
- ✗ No screwdriver, tri-wing bit, or pry tools included
- ✗ Requires opening the controller and a soldered ribbon swap
- ✗ Manual recalibration in Switch settings needed after install
- ✗ Listing sells as 1pc or 2pcs, so quantity is easy to mis-order
Manufacturer description
NOTE: Please Calibrate the joystick by using Switch Lite or Switch Setting after the installation.Generl Features:- Replacement 3D analog joystick thumb stick joystick sensor module for Switch Lite and Switch Joy-Con.- Both for Left and Right joy-con, fixes common issues with faulty thumbsticks.- Easy to install and detach, No tools or screws included.- A great backup for all Switch Lite & Switch Fans.Specifications:Type: Joystick for Switch Lite and Switch Joy-ConMaterial: Plastic + MetalNet Weight: 0.1oz(3g)Compatible with both Switch Lite and Switch Joy-Con
SpecPicks Verdict
SpecPicks scored Kinyanco Replacement 3D Analog Joystick using a rating × review-volume × price-fit model applied to published specs and reviews across the joysticks & game port category. Kinyanco's joysticks & game port lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for joysticks & game port of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Replacement 3D analog joystick thumb stick for Switch Lite and Switch Joy-Con.
- Works for both left and right controller, analog sensor gamepad stick with cap.
- Easily for you to replace the broken, worn-out or damaged analog stick with a wonderful new one.
- Great quality with material of plastic with metal, lightweight thumbsticks. NOTE: Please calibrate the joystick by using Switch Setting after the installation.
- Package includes: 1pc or 2pcs x Replacement Joystick. It depends on your choice
Full Specifications
| Brand | Kinyanco |
|---|---|
| Color | 2-Pack |
| Model Number | LX-1311123 |
| Power Source | Battery Powered |
| Compatibility | Switch |
| Controller Type | Joystick |
| Package includes | 1pc or 2pcs x Replacement Joystick. It depends on your choice |
| Hardware Platform | Gaming Console |
| Compatible Devices | Gaming Console |
| Additional Features | Ergonomic |
| Connectivity Technology | Bluetooth |
| Manufacturer Part Number | LX-1311123 |
| Compatible Video Game Console Models | Nintendo Switch |
| Full listing title | Kinyanco Replacement 3D Analog Joystick for Switch lite and Switch Joy-Con, Left or Right Analog Thumb Stick Joystick Replace (2-Pack) |
Ready to buy?
Kinyanco Replacement 3D Analog Joystick for Switch lite and Switch Joy-Con, Left or Right Analog Thumb Stick Joystick Replace (2-Pack) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for a Homelab in 2026: AI, VMs & Budget Picks
- Best Budget Streaming & Content-Creation Gear in 2026: 5 Picks That Punch Above Their Price
- How Companies Name Their Monitors: Brand-by-Brand Guide
- Lenovo G02 Retro Handheld Reportedly Ships With Pirated Game Library
- Best Budget GPU for Stable Diffusion: Why the RTX 3060 12GB Still Wins
- Microsoft + Nvidia AI PCs Run Real Agents: The Local Hardware That Matches (2026)
- Claude Code + Fable 5 Ported Command & Conquer to iOS in Hours: What Local Coding Rigs Need
- Best Parts for a Dual RTX 3060 24GB Local-LLM Build in 2026
- AMD EXPO Ultra-Low Latency BIOS Updates: 600-Series Guide
- Quiet RTX 3060 12GB Local LLM Box: Build Notes from a Real Setup
- Best Mechanical Keyboard for Office Work & Productivity (2026)
- Cyberdeck Raspberry Pi 4/5 Mini Music Workstation Build Guide
- Qwen 3.6 vs Frontier Models on a Local Rig: The Honest Gap
- Gemma-4-Harmonia-31B Heretic: What the Uncensored Merge Adds Over Base Gemma 4
- Can an RTX 3060 12GB Still Run 2026's Local LLMs?
- LongCat-2.0: A Frontier Model Trained Without Nvidia GPUs
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput and VRAM Limits in 2026
- Best Controller for PC AAA Gaming in 2026
- Running Local LLMs on a Raspberry Pi 4 8GB: tok/s, Quantization, and What Actually Works
- Best USB Microphones for Streaming and Podcasting (2026)
- Ollama on Intel + AMD via IPEX-LLM: Docker Compose Guide
- Best GPU for ComfyUI and SDXL Under $350 — Why the RTX 3060 12GB Still Wins
- Thinking Machines Drops Inkling, a 975B Open Model Leading US Labs
- RTX 5070 Ti vs 4070 Ti SUPER
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090