JMT
JMT 39 Pin IDE to SATA Connector SATA IDE Adapter 3.5 HDD IDE/PATA Hard Disk Adapter Converter Card with Data Power Cable
Bottom line: The JMT 39 Pin IDE to SATA Connector SATA IDE Adapter 3.5 HDD IDE/PATA is a specs-and-price decision rather than a crowd-consensus one in the storage adapters category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Transfer the IDE burner to SATA, then connect it to the SATA port of the motherboard.
- ✓ Backed by JMT's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Specification:Product size: 6*2.2CMProduct village materials: using PCB double-layer circuit boardScope of use: used for IDE optical drives, burners, 3.5-inch hard drives, recorder hard drivesCompatible system: compatible with windowsXp\win7\win8 32-bit\64-bit systemFeatures:1.Transform the IDE hard disk of the recorder to SATA and connect it to the SATA port of the motherboard.2. Convert 3.5-inch IDE hard disk to SATA, and connect it to the SATA port of the motherboard3. IDE optical drive to SATA, connected to the motherboard SATA port4. Transfer the IDE burner to SATA, then connect it to…
SpecPicks Verdict
SpecPicks scored JMT 39 Pin IDE to SATA Connector SATA IDE Adapter 3.5 HDD IDE/PATA… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. JMT's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Transform the IDE hard disk of the recorder to SATA and connect it to the SATA port of the motherboard.
- Convert 3.5-inch IDE hard disk to SATA, and connect it to the SATA port of the motherboard.
- Transfer the IDE burner to SATA, then connect it to the SATA port of the motherboard.
- The adapter card supports a parallel port hard disk with a maximum capacity of 1000G.
- Plug and play, no driver required
Full Specifications
| Brand | JMT |
|---|---|
| Style | Classic |
| Weight | 1000g |
| Style Name | Classic |
| Unit Count | 1 Count |
| Model Number | N39013 |
| Mfr Part Number | N39013 |
| Compatible Devices | Personal Computer |
| Hardware Interface | IDE |
Ready to buy?
JMT 39 Pin IDE to SATA Connector SATA IDE Adapter 3.5 HDD IDE/PATA Hard Disk Adapter Converter Card with Data Power Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Gaming Monitor Under $300 in 2026
- How to run Llama 3.1 8B on Apple M3 Ultra
- Best Gaming Headset for PS5 and PC in 2026
- RTX 5070 Ti vs RTX 5090 for Local LLMs: 16GB vs 32GB
- DFlash Speculative Decoding on Qwen3.5-35B-A3B: How an RTX 2080 Super 8GB Hits 60+ tok/s
- Best Raspberry Pi Heatsink and Cooling Kits for Pi 5 in 2026
- OpenAI Says GPT-5.5-Cyber Beats Anthropic's Mythos on Security
- Best SSD for a 1TB+ Steam Library in 2026: SATA vs NVMe Showdown
- Can a Raspberry Pi 4 8GB Run a Local LLM with Ollama?
- Best Game Controllers for PC and Emulation in 2026
- Building a Silent Windows 98 PC with a CompactFlash Boot Drive
- Intel Core Ultra X7 Panther Lake Performance on Linux 7.1
- Ryzen 7 5800X vs 5700X for 1080p High-Refresh Gaming
- Local AI on a Raspberry Pi in 2026: What Actually Runs (and What Doesn't)
- StarCraft Brood War in 2026: Joining Battle.net Classic, the Fish Server, and ASL Pro Circuit
- Building a CompactFlash + IDE Storage Stack for Win98 and WinXP Retro Rigs
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- Self-hosting an OpenAI-compatible LLM gateway with LiteLLM
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: the best PC controller for retro emulation in 2026
- SteamOS Boots on Intel Hardware After Community Port
- IBM Granite 4.1 (3B / 8B / 30B): Local Inference Benchmarks and Hardware Picks
- Best DualSense and PC-Compatible Controller (2026)
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Skytech Prism 4 vs MSI Codex Z2: Which Prebuilt Wins at 1440p?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090