Skip to main content
10PCS Micro SD SDHC TF Card Adapter Reader Module
ANMBEST

10PCS Micro SD SDHC TF Card Adapter Reader Module

Bottom line: The ANMBEST 10PCS Micro SD SDHC TF Card Adapter Reader Module is a specs-and-price decision rather than a crowd-consensus one in the storage adapters category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar storage adapters

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Backed by ANMBEST's warranty and support channels

Cons

  • ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

The module (Micro SD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD Card to complete the library card initialization and read-write.Technical Specifications:Voltage: 4.5V~5.5V DCCurrent: 0.2~200mACommunication Interface: Standard SPIInterface Voltage Level: 3.3V or 5VApplicable card type: Micro SD Card(less than 2G), Micro SDHC Card(less than 32G)Control Interface: (GND, 3V3, MISO, MOSI, CLK, CS), GND to ground…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored ANMBEST 10PCS Micro SD SDHC TF Card Adapter Reader Module using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. ANMBEST's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Voltage: 4.5V~5.5V DC; Communication Interface: Standard SPI; Interface Voltage Level: 3.3V or 5V; Applicable card type: Micro SD Card, Micro SDHC Card.
  • The module (Micro SD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file to read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD Card to complete the library card initialization and read-write.
  • The module built-in level regulator circuit, level conversion circuit board that can interface level is 5V or 3.3V.
  • Micro SD card to signal the direction of converts 3.3V, Micro SD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.
  • The communication interface is a standard SPI interface, easy to connect to any device with SPI interface; 2 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.

Full Specifications

BrandANMBEST
ColorBlack, Blue
Voltage4.5V~5.5V DC; Communication Interface: Standard SPI; Interface Voltage Level: 3.3V or 5V; Applicable card type: Micro SD Card, Micro SDHC Card.
Model NumberANMBEST_MD272
Input Voltage4.5 volts_of_direct_current
Connector TypeMicro SD
Mfr Part NumberANMBEST_MD272
Number of Items10
Number of Ports1
Power Plug TypeNo Plug
Compatible DevicesPersonal Computer

Ready to buy?

10PCS Micro SD SDHC TF Card Adapter Reader Module is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
10PCS Micro SD SDHC TF Card Adapter Reader Module
View on Amazon →