eXtremeRate ThumbsGear Interchangeable Ergonomic Thumbstick for PS5 Controller
Bottom line: The eXtremeRate ThumbsGear Interchangeable Ergonomic Thumbstick: 6-in-1 kit: 3 stick heights x 2 grip surfaces = 8 usable combinations; main trade-off: PS5 and PS4 controllers only, no Xbox or Switch support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 6-in-1 kit: 3 stick heights x 2 grip surfaces = 8 usable combinations
- ✓ Height swaps after base install need no controller teardown
- ✓ Concave cap grips the thumb for precision aiming
- ✓ Domed convex cap cuts thumb fatigue on long sessions
- ✓ Screwdriver and prying tools included in the box
Cons
- ✗ PS5 and PS4 controllers only, no Xbox or Switch support
- ✗ Requires opening the controller shell for the initial base install
- ✗ Opening the shell may affect controller warranty coverage
- ✗ Plastic construction, not aluminum or rubberized caps
Manufacturer description
The eXtremeRate ThumbsGear interchangeable thumbstick set replaces the fixed analog sticks on your PS5 controller and all PS4 controller models with a 6-in-1 modular system. You get three stick heights and two grip surfaces, so you can mix and match eight combinations to suit whatever you're playing. The concave cap locks your thumb into the stick for precision aiming in shooters, while the domed convex cap spreads contact across a wider surface to reduce thumb fatigue during long sessions. Once the base is installed, swapping heights takes seconds and does not require taking the controller…
SpecPicks Verdict
SpecPicks scored eXtremeRate ThumbsGear Interchangeable Ergonomic Thumbstick using a rating × review-volume × price-fit model applied to published specs and reviews across the controllers & gamepads category. eXtremeRate's controllers & gamepads lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for controllers & gamepads of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these fit my PS5 DualSense controller?
Yes. The ThumbsGear set fits the PS5 controller and all PS4 controller models. It does not fit Xbox, Switch, or other third-party controllers.
Do I have to open my controller to change the height?
Only once. You open the shell to install the base, then switch between the 3 heights freely without taking the controller apart again.
What is the difference between the concave and domed grips?
The concave surface lets your thumb sit tightly in the stick for better grip and control. The domed convex surface increases comfort and reduces hand and thumb fatigue.
Do I need my own tools to install this?
No. The kit includes a screwdriver and prying tools. eXtremeRate also posts an install guide on YouTube under video ID GJfxPgLN7_M.
Is this worth it over stock PlayStation thumbsticks?
The draw is the 8 height-and-grip combinations stock sticks cannot match.
Key Features
- Compatibility: Compatible with PS5 controller, for PS4 all model controllers, NOT fit for other controllers
- The 6 in 1 adjustable plastic analog joystick has 3 different heights. After installing the base, you can choose and switch your favorite height without having to take apart the controller every time
- 2 different ergonomic thumb grip design. The concave surface can allow your fingers to fit tightly with the joystick for better grip; the convex surface can increase your comfort and reduce the fatigue of your hands and thumbs
- Mix and match your thumbsticks from 3 different height and 2 different grips to fix different games
- Easy to replace. the screwdriver and prying tools can help you easily open the shell and install the replacement part. Get the installation guide by searching “eXtremeRate ThumbsGear interchangeable thumbsticks for PS4” and “GJfxPgLN7_M” on Youtube
Full Specifications
| Brand | eXtremeRate |
|---|---|
| Color | Black |
| Model Number | P4J1101 |
| Compatibility | Compatible with PS5 controller, for PS4 all model controllers, NOT fit for other controllers |
| Mfr Part Number | P4J1101 |
| Compatible Devices | PS5 Controller, PS4 Controller |
| Enclosure Material | Hard ABS plastic, TPU |
| Item Dimensions L x W x H | 1.97"L x 1.97"W x 0.59"H |
| Full listing title | eXtremeRate ThumbsGear Interchangeable Ergonomic Thumbstick for PS5 Controller, for PS4 All Model Controller - 3 Height Domed and Concave Grips Adjustable Joystick - Black |
Ready to buy?
eXtremeRate ThumbsGear Interchangeable Ergonomic Thumbstick for PS5 Controller, for PS4 All Model Controller - 3 Height Domed and Concave Grips Adjustable Joystick - Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Controllers & Gamepads
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Local-AI Workstation Parts in 2026: 5 Picks
- The Adder at the Heart of Intel's 8087 Math Coprocessor
- Raspberry Pi LLM Projects: What Actually Runs in 2026
- Ryzen 5 5600G vs Ryzen 7 5800X for a 24/7 Ollama Box
- Best budget SSD for a gaming PC in 2026: BX500 vs 970 EVO Plus vs SSD Plus
- DeepCool AK620 vs Noctua NH-U12S for Ryzen 7 5800X: Which Air Cooler Wins in 2026?
- Qwen3.8 Max vs Claude Opus 4.8: What the Cost-Per-Task Gap Means for Local Rigs
- NES Graphics Upgrade Mod Gains Community Traction
- Microsoft's SkillOpt Boosts GPT-5.5 With Just a Trained Markdown File
- Ryzen 5 5600G vs Ryzen 7 5700X for a 2026 Home Lab
- Best Cooler for a Ryzen 7 5800X: ML240L RGB V2 vs Kraken M22
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Game Streaming in 2026
- Ryzen 9800X3D vs 7800X3D: Best CPU for an RTX 5070 Build
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- Raspberry Pi 5 + Hailo-8 vs Jetson Orin Nano Super: Which Edge AI Box Wins for Vision Workloads?
- AMD Ryzen 7 7700X3D Review: 7800X3D's OEM-Only Rival
- Best Mini PC for Local LLM Inference in 2026
- 9800X3D vs Core Ultra 9 285K — gaming vs productivity
- Best Beginner Racing Wheel in 2026: Logitech G920 vs HORI Racing Wheel Overdrive
- Intel Arc Pro B70 (BMG-G31) Posts Strong Linux Gaming Numbers — How It Stacks Up Against an RTX 3060
- Build Your Own Gaming PC in 2026: The 5 Components That Actually Matter
- Sound Blaster AWE32 vs AWE64: Which Belongs in Your DOS Build?
- Best NVMe SSD for Local LLM Model Storage in 2026
- Tenstorrent TT-QuietBox 2 (Blackhole) vs RTX 5090: Should LLM Builders Care?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090