GPU Riser for Ethereum Mining Rigs, PCIE Risers for ETH Mining Rigs, 6PCS Black
Bottom line: The FebSmart GPU Riser for Ethereum Mining Rigs: Six PCIe x1 to x16 risers per pack, enough to add six GPUs to one rig; main trade-off: warranty is only 30 days; FebSmart treats risers as consumables.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Six PCIe x1 to x16 risers per pack, enough to add six GPUs to one rig
- ✓ 23.6-inch USB 3.0 cable per riser for flexible GPU spacing and airflow
- ✓ 3 solid capacitors, a voltage transformer and an inductor steady PCIe power
- ✓ Built-in safety fuse protects against overvoltage and overcurrent
- ✓ Fixed buckle on the x16 slot holds GPUs firmly seated
Cons
- ✗ Warranty is only 30 days; FebSmart treats risers as consumables
- ✗ SATA power lead alone may not power heavy GPUs; 6+2-pin PSU power required
- ✗ Inserting the x1 connector backwards can damage the GPU or motherboard slot
- ✗ Single PCIe x1 link limits bandwidth for non-mining workloads
Manufacturer description
The FebSmart VER006C is a PCIe x1 to PCIe x16 GPU riser, sold in a pack of six for building multi-GPU mining rigs. Each riser plugs into a PCIe x1 slot on the motherboard and gives you a full-length x16 slot that you can place away from the board. That leaves room for more graphics cards and better airflow between them. A fixed buckle on the x16 slot holds the card in place so it stays seated during long runs. Each riser board has 3 solid capacitors, 1 voltage transformer and 1 inductor to keep power to the PCIe signal steady. A built-in safety fuse protects against overvoltage and…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for FebSmart GPU Riser for Ethereum Mining Rigs, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "Six PCIe x1 to x16 risers per pack, enough to add six GPUs to one rig"; the main trade-off is "Warranty is only 30 days; FebSmart treats risers as consumables". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What comes in the FebSmart VER006C 6-pack?
You get six PCIe x1 to x16 riser kits. Each kit includes the riser board with an x16 slot, an x1 adapter, a 23.6-inch USB 3.0 extension cable and a 7.9-inch 15-pin SATA to 6-pin power cable.
Is the SATA power cable enough to run my graphics card?
Not always. FebSmart warns that heavy GPUs may not get enough power when the SATA to 6-pin cable is the only source. Plug the card's own 6+2-pin connectors straight into the PSU. In that setup you can remove the riser's SATA cable.
Is the USB cable a real USB connection to my PC?
No. The 23.6-inch USB 3.0 cable only carries the PCIe x1 signal from the adapter in your motherboard slot to the riser board holding the GPU. Do not plug it into a USB port.
What warranty does FebSmart offer on these risers?
FebSmart provides a 30-day warranty only, because the risers are treated as consumables in rigs that run 24/7. The warranty does not cover damage from inserting the x1 connector backwards into the motherboard slot.
What protection does the riser have against power problems?
Each riser has a built-in safety fuse that protects against overvoltage and overcurrent. It also has 3 solid capacitors, 1 voltage transformer and 1 inductor to keep power to the PCIe signal stable.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 1. This FebSmart VER006C is a PCIE X1 to PCIE X16 GPU riser. The GPU riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining.
- 2. This GPU riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance.
- 3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on GPU Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate.
- 4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU.
- 5. ATENNTION: The GPU riser may can not provide enough power for some heavy GPUs when the 6Pin to 15Pin SATA power cable is the only power supply. Users MUST PLUG the 6+2 Pin power supply on the GPUs, pick up power from PSU (power supply unit) directly. In this case users can remove the PCIE riser 6Pin to 15Pin SATA power cable.
- 6. WARNNING: 1. GPU Risers will work with GPUs Miner Rigs 7X 24hours, it is consumables, provide 30 days warranty ONLY. 2. If the PCIE X1 interface connector inserted REVERSELY on motherboard PCIE slot, will damage the connected GPUs or PCIE slot. FebSmart do not responsible to these incorrect using damage.
Full Specifications
| Brand | FebSmart |
|---|---|
| Color | Matte Black |
| Finish | Black |
| Unit Count | 1 Count |
| Connectivity | USB |
| Model Number | VER006C-6PCS |
| Nominal Power | 180 watts |
| Warranty Type | Extended |
| Connector Type | USB 3.0 |
| Item Type Name | VER006C PCIE Riser-Black-6PCS/PACK |
| Item Dimensions | 5.12 x 0.14 x 0.71 inches |
| Mfr Part Number | PCIE Riser-Black-6PCS |
| Number of Items | 6 |
| Number of Ports | 6 |
| Power Plug Type | No Plug |
| Compatible Devices | Personal Computer |
| Warranty Description | GPU Risers will work with GPUs Miner Rigs 7X 24hours, it is consumables, provide 30 days warranty ONLY. |
| Item dimensions L x W x H | 5.12 x 0.14 x 0.71 inches |
| Specific Uses For Product | Business, Personal |
Ready to buy?
GPU Riser for Ethereum Mining Rigs, PCIE Risers for ETH Mining Rigs, 6PCS Black is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- Best CPU Cooler for AM5 and LGA1700 Overclocking (2026)
- Building a 3dfx Voodoo2 SLI Win98 Rig with a CompactFlash Boot Drive
- Raspberry Pi Zero 2W: Privacy-Preserving Ring Alternative
- Raspberry Pi 4 8GB vs Zero 2W for an AI Camera (2026)
- Shared ChatGPT and Claude Chat Links Are Spreading Malware (And Local LLMs Fix It)
- Voodoo3 3000 Period-Correct Build Log: Quake 3 + UT99 LAN Rig for 1999
- Can the RTX 3060 12GB Run Qwen3-27B Locally in 2026?
- First-Time Steam Deck Emulation Setup: A Complete Guide
- Best Budget 4K Gaming Monitor 2026: SANSUI 27" vs KOORUI QD-Mini LED vs ASUS TUF
- Best Budget GPU for Stable Diffusion and SDXL in 2026
- BOSGAME VTA-439: AMD Ryzen AI 9 HX 470 Mini PC for Linux
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
- Build a Raspberry Pi 4 NAS With an SSD in 2026
- Claude Opus 4.8 Tops the Intelligence Index — How Close Can a $300 RTX 3060 Get Locally?
- How to run Qwen 3 32B on NVIDIA GeForce RTX 4090
- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- Hailo-10H AI Accelerator on Raspberry Pi 5: Real Tok/s for On-Device LLMs
- NVMe vs SATA for Gaming: WD Blue SN550 vs Crucial BX500 in 2026
- RetroPie Handheld Case Comparison 2025: Top Picks
- BOSGAME VTA-439: A Linux-Friendly Ryzen AI 9 HX 470 Mini PC
- Best GPU for Local LLMs Under $400 in 2026: Why 12GB Still Wins
- Best Raspberry Pi Alternatives 2026: 5 SBCs After the Price Hikes
- STEPLA-1 8-Bit Hardwired CPU: 74-Series Logic Explained
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090