Skip to main content
GLOTRENDS 400mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs, Such as GeForce RTX 20/GTX 16/GTX 10 Series and AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, etc
GLOTRENDS

GLOTRENDS 400mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs

Bottom line: The GLOTRENDS 400mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs ($49.99 on Amazon as of 2026-11-20 21:49 UTC): PCIe 3.0 x16 link rated for up to 16GB/s peak bandwidth; main trade-off: PCIe 3.0 only; PCIe 4.0 GPUs may lose performance or blue-screen.

$49.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ PCIe 3.0 x16 link rated for up to 16GB/s peak bandwidth
  • ✓ 400mm length suits vertical GPU mounts and offset custom layouts
  • ✓ Plug-and-play with no driver installation required
  • ✓ Listed for RTX 20, GTX 16/10, RX 5000, Radeon VII, Vega and R9 Fury cards
  • ✓ Lifetime tech support, including help with riser length and board compatibility

Cons

  • ✗ PCIe 3.0 only; PCIe 4.0 GPUs may lose performance or blue-screen
  • ✗ PCIe 4.0 cards need the slot manually forced to Gen3 in BIOS
  • ✗ No hot swapping; the system must be powered off to connect
  • ✗ Exposed gold fingers are sensitive; fingerprints can degrade signal

Manufacturer description

The GLOTRENDS 400mm PCIe 3.0 x16 Riser Cable lets you move your graphics card away from the motherboard slot without giving up a full x16 link. It is rated for up to 16GB/s of peak bandwidth, so a PCIe 3.0 GPU runs at its native interface speed whether you mount it vertically, in a separate GPU chamber or in a custom open-frame build. GLOTRENDS lists compatibility with PCIe 3.0 cards such as the GeForce RTX 20, GTX 16 and GTX 10 series and AMD Radeon RX 5000, Radeon VII, RX Vega and R9 Fury series. You don't need to install any drivers. Plug it in with the system powered off, because hot…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for GLOTRENDS 400mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs, so this read rests on the manufacturer's listed specs and the current price in the expansion cards category (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "PCIe 3.0 x16 link rated for up to 16GB/s peak bandwidth"; the main trade-off is "PCIe 3.0 only; PCIe 4.0 GPUs may lose performance or blue-screen". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe 3.0 x16 slot. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this riser cable work with my RTX 4000 series or other PCIe 4.0 graphics card?

It is a PCIe 3.0 cable. GLOTRENDS warns that PCIe 4.0 GPUs may run with reduced performance or blue-screen unless you manually set the PCIe slot to PCIe 3.0 in your motherboard BIOS.

Which graphics cards is the GLOTRENDS 400mm riser compatible with?

GLOTRENDS lists PCIe 3.0 GPUs such as the GeForce RTX 20, GTX 16 and GTX 10 series and AMD Radeon RX 5000, Radeon VII, RX Vega and R9 Fury series.

Do I need to install drivers or software to use it?

No. The cable needs no driver installation. Hot swapping is not supported, so shut down and unplug the PC before you connect or disconnect it.

How much bandwidth does the riser support?

It is a full PCIe 3.0 x16 cable rated for up to 16GB/s peak bandwidth, the maximum for a PCIe 3.0 x16 link.

Is 400mm the right length for my case?

The cable is 400mm long, which suits vertical GPU mounts and offset layouts. GLOTRENDS' lifetime tech support can help you choose a riser length for your case and motherboard. Check your case's vertical-mount spacing before you buy.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • PCIE 3.0 x16 Riser Cable – Unleash 16GB/s Peak Speed. No driver installation required (hot swapping not supported).
  • Fully compatible with low-end PCIe 3.0 GPUs, Such as GeForce RTX 20/GTX 16/GTX 10 Series and AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, etc
  • For PCIe 4.0 GPUs, the performance will be degraded or blue screen may occur, please manually set the PCIE slot in the BIOS to PCIE 3.0.
  • Packaged in an anti-static bag, try not to touch the gold finger before use, as handprints or stains will affect signal performance.
  • Get lifetime tech support - contact us for troubleshooting manual, including GPU, motherboard compatibility issues, how to choose PCIE riser cable length, and more.

Full Specifications

BrandGLOTRENDS
ModelPCIE30-X16-400MM-0090D
Cable TypePCIE 3.0 X16 Riser Cable
Item ShapeFlat
Unit Count1 Count
Part NumberPCIE30-X16-400MM-0090D
Connector TypeFemale: 90 Degree Angle, Male: 0 Degree Angle
Number of Pins16
Number of Items1
Special Feature400mm Length, 90 Degree Right Angle
Connector GenderMale-to-Female
Compatible DevicesAMD Radeon RX5000/VII/RX Vega/R9 Fury Series, GeForce RTX 20/GTX 16/GTX 10 Series
Data Transfer Rate16 gigabytes_per_second
Included ComponentsPCIE 3.0 Riser Cable
Indoor Outdoor UsageIndoor
Recommended Uses For ProductConnecting low-end PCIe 3.0 GPUs to motherboards in systems with space constraints or other issues.
Other Special Features of the Product400mm Length, 90 Degree Right Angle
Full listing titleGLOTRENDS 400mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs, Such as GeForce RTX 20/GTX 16/GTX 10 Series and AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, etc

Ready to buy?

GLOTRENDS 400mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs, Such as GeForce RTX 20/GTX 16/GTX 10 Series and AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, etc is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $49.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →