Skip to main content
Gamebit Screwdriver, EMiEN 4.5mm 3.8mm Double-End Bit Security Gamebit Screwdriver Kit For Opening NES,SNES,N64,GameBoy,GameCube,Virtual Boy,Sega,Nintendo Consoles,Game Cartridges
EMiEN

EMiEN Gamebit Screwdriver

Bottom line: The EMiEN Gamebit Screwdriver ($5.79 on Amazon as of 2026-11-20 23:17 UTC): Double-ended bit covers both 3.8mm and 4.5mm gamebit sizes in one tool; main trade-off: only two bit sizes - no Phillips or tri-wing for Game Boy Advance shells.

$5.79 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro consoles and console accessories, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Double-ended bit covers both 3.8mm and 4.5mm gamebit sizes in one tool
  • ✓ Magnetic tip holds tiny console screws instead of dropping them
  • ✓ Industrial hardened carbon steel bits resist stripping on old screws
  • ✓ Spans NES, SNES, N64, GameCube, Game Boy, Virtual Boy, Genesis, 32X, TurboGrafx-16

Cons

  • ✗ Only two bit sizes - no Phillips or tri-wing for Game Boy Advance shells
  • ✗ Carbon steel is harder than stainless but can corrode if stored damp
  • ✗ Single-piece design means a snapped bit retires the whole tool
  • ✗ No listed torque or grip spec for badly seized factory screws

Manufacturer description

The EMiEN Gamebit Screwdriver Kit solves the single problem that blocks every retro console repair: Nintendo and Sega's proprietary tri-tip security screws. This double-ended bit covers both sizes you actually need, with a 3.8mm end for NES, SNES, N64, Virtual Boy, Game Boy, Game Boy Color, and Sega Game Gear cartridges, and a 4.5mm end for Sega Master System, Genesis, and 32X cartridges plus SNES, N64, GameCube, and TurboGrafx-16 console shells. The bits are industrial hardened carbon steel, so they bite into decades-old screws instead of stripping out on the first turn. A magnetic tip…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for EMiEN Gamebit Screwdriver, so this read rests on the manufacturer's listed specs and the current price in the retro consoles category (how we evaluate). Compare with similarly-priced alternatives in the retro consoles category before committing. On the listing's own facts, the case for it is "Double-ended bit covers both 3.8mm and 4.5mm gamebit sizes in one tool"; the main trade-off is "Only two bit sizes - no Phillips or tri-wing for Game Boy Advance shells". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this open both game cartridges and console shells?

Yes. The 3.8mm end fits NES, SNES, N64, Virtual Boy, Game Boy, Game Boy Color, and Game Gear cartridges; the 4.5mm end fits Sega Master System, Genesis, and 32X cartridges plus SNES, N64, GameCube, Virtual Boy, and TurboGrafx-16 console housings.

Which size do I need for an original NES cartridge?

The 3.8mm gamebit end. NES, SNES, N64, Virtual Boy, Game Boy, and Game Boy Color cartridges all use the 3.8mm security screw.

Is the tip magnetic?

Yes. EMiEN lists a magnetic tip that grabs and holds screws as you remove them, which keeps 3mm console screws from vanishing when you lift a shell.

What are the bits made of?

Industrial hardened carbon steel, per the manufacturer's spec. That hardness is what lets the bit seat in a 30-year-old screw head without rounding it off.

Is this enough for a full Game Boy or Genesis teardown?

It covers the gamebit security screws, which are the ones no standard driver touches. Some models also use Phillips or tri-wing screws internally, so check your specific teardown guide before you start.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • [Quality & Precise] : Gamebit Screwdriver bits are made of industrial hardened carbon steel. Precise, High Hardness, Durable For Long Time Use.
  • [Doube-End Portable Design] : With 4.5mm & 3.8mm head Screwdriver Bit, Perfet One Gamebit Screwdriver for NES, SNES, N64, GameBoy, GameCube, Virtual Boy, Sega, Nintendo Consoles and Game Cartridges.
  • [Magnetic Bit] : Gamebit Screwdriver With Magnetic Tip Absorbs Screws Easily, Not Afraid To Lose A Tiny Screw.
  • [3.8mm Gamebit Screwdriver] : Compatible With Game Cartridges For Nintendo (NES), Super Nintendo (SNES), Nintendo 64 (N64), Virtual Boy, Original Game Boy, Game Boy Color, And Sega Game Gear.
  • [4.5mm Gamebit Screwdriver] : Compatible With Sega Master System, Sega Genesis System, Sega 32x System Game Cartridge; Super Nintendo, Nintendo 64, Game Cube, Virtual Boy, Game Gear, Turbografx 16, Turboduo Console.

Full Specifications

BrandEMiEN
ColorOrange
MaterialAlloy Steel, Plastic
Head StyleGamebit
CompatibilityN64, SNES, NES
Number of Items1
Full listing titleGamebit Screwdriver, EMiEN 4.5mm 3.8mm Double-End Bit Security Gamebit Screwdriver Kit For Opening NES,SNES,N64,GameBoy,GameCube,Virtual Boy,Sega,Nintendo Consoles,Game Cartridges

Ready to buy?

Gamebit Screwdriver, EMiEN 4.5mm 3.8mm Double-End Bit Security Gamebit Screwdriver Kit For Opening NES,SNES,N64,GameBoy,GameCube,Virtual Boy,Sega,Nintendo Consoles,Game Cartridges is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $5.79

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Retro Consoles

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →