EZDIY-FAB White Moonlight 120mm RGB Case Fan with Fan Hub X and Remote
Bottom line: The EZDIY-FAB White Moonlight 120mm RGB Case Fan with Fan Hub X and Remote: Tri-aperture frame lights inside and outside edges, not just a single LED ring; main trade-off: no PWM support - motherboard fan curves cannot control these speeds.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Tri-aperture frame lights inside and outside edges, not just a single LED ring
- ✓ Syncs to standard 3-pin 5V ARGB header (5V, Di, -, G) for Aura SYNC and equivalents
- ✓ 21-key remote adjusts effects, color, brightness, and speed without board software
- ✓ 8 anti-vibration rubber pads included to damp frame buzz against case panels
Cons
- ✗ No PWM support - motherboard fan curves cannot control these speeds
- ✗ Hub X caps at 6 fans and 5A, so a seventh fan needs a second hub
- ✗ White frame limits color accuracy compared to a neutral black or clear frame
- ✗ Airflow, static pressure, and RPM figures are not published in the listing
Manufacturer description
Each fan uses a tri-aperture design that pushes light through both the inside and outside of the white frame, so the glow reads as a solid ring rather than a few hot LED points. You can sync the ARGB lighting to your motherboard through a standard 3-pin 5V addressable header (5V, Di, -, G), which covers Aura SYNC and the equivalent ecosystems from other board vendors. If your board lacks that header, the bundled remote handles effects, colors, brightness, and fan speed directly. EZDIY-FAB fits eight anti-vibration rubber pads across the set to keep frame buzz out of your case panels, and the…
SpecPicks Verdict
SpecPicks scored EZDIY-FAB White Moonlight 120mm RGB Case Fan with Fan Hub X and Remote using a rating × review-volume × price-fit model applied to published specs and reviews across the motherboards category. EZDIY-FAB's motherboards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many fans come in this EZDIY-FAB Moonlight pack?
Six 120mm ARGB fans, plus the EZDIY-FAB Fan Hub X and a 21-key remote.
Will these fans work with my motherboard's RGB software?
Yes, if your board has a 3-pin addressable RGB header wired 5V, Di, -, G. EZDIY-FAB lists Aura SYNC support, and the same 5V ARGB standard is used by other major board vendors.
Can I control fan speed from my motherboard's fan curve?
No. EZDIY-FAB states the fan speed is controlled by the remote only and does not support PWM motherboard control, so plan on setting speed manually.
Can I add more than six fans to the Fan Hub X?
No. EZDIY-FAB specifies the Hub X supports 6 fans maximum with a 5A current ceiling. A larger build needs a second hub or a separate controller.
Are these fans noisy?
EZDIY-FAB uses a self-lubricated bearing with a friction-reducing substance and includes 8 anti-vibration rubber pads to cut frame vibration.
Key Features
- Astonishing lighting effects-Tri-aperture inside and outside luminous light effect in White color frame,Give out an impact visual light effect.
- Sync RGB lighting via motherboard: Support M/B 3 pin RGB Header (5V, Di, -, G).
- With EZDIY-FAB Fan Hub X and 21-key remote -You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.NOTE：Maximum Current-5A HUB-X ONLY Supports 6 fans connected.
- Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reducing noise and improving efficiency.
- Self-lubricated Bearing and friction-reducied substance lowers operation noise and enhance thermal efficiency. Fan speed only controlled by remote, does not support PWM motherboard control.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Model | US-white rgb slim fan with hub X-5P |
| Voltage | 12 volts |
| Material | Polycarbonate, Rubber |
| Unit Count | 6 Count |
| Noise Level | 23.2 db |
| Part Number | US-white rgb slim fan with hub X-5P |
| Compatibility | PC |
| Material Type | Polycarbonate, Rubber |
| Cooling Method | Air |
| Number of Items | 6 |
| Vibration/Rumble | Yes |
| Air Flow Capacity | 26.16 cfm |
| Compatible Devices | Desktop |
| Power Connector Type | 3-Pin |
| Warranty Description | 1 year |
| Maximum Rotational Speed | 1300 rpm |
| Item Dimensions L x W x H | 4.72"L x 0.98"W x 4.72"H |
| Sync RGB lighting via motherboard | Support M/B 3 pin RGB Header (5V, Di, -, G). |
| Full listing title | EZDIY-FAB White Moonlight 120mm RGB Case Fan with Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control, ARGB Fan for PC , Desktop Case-6 Pack |
Ready to buy?
EZDIY-FAB White Moonlight 120mm RGB Case Fan with Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control, ARGB Fan for PC , Desktop Case-6 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5080
- 7800X3D vs 5700X3D: Is the AM5 Upgrade Worth It?
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- Raspberry Pi 5 + Hailo-8L vs Coral Dual Edge TPU: Which AI Accelerator HAT Wins in 2026?
- Sound Blaster Audigy FX vs Sound Blaster Live! for Period-Correct Win98 Builds
- Raspberry Pi 5 + AI HAT: Five Computer-Vision Projects That Actually Run in Real Time
- Cursor vs Cline vs Aider for Local-First AI Coding in 2026
- Private Smart Home: Running a Local LLM Voice Assistant in 2026
- Steam Deck on 100+ Inch Screens: Big-Screen Setup Guide
- Best Sim Racing Gear for Beginners in 2026
- NVIDIA Bankrolls AI Startups to Tighten Its Chip Grip
- Using Claude to Hunt PCI Device IDs on Win98: Voodoo, Audigy, GeForce 4 Ti
- Best SSD for PS5 Storage Expansion Under $100 (2026)
- Noctua NH-U12S vs DeepCool AK620 on Ryzen in 2026: Honest Pick
- Sound Blaster Audigy 2 ZS in a 2026 WinXP Build: The Last True EAX Card
- China Mobile JT-4.1 Flash 236B: A Token-Efficient MoE and What It Takes to Self-Host
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: What It Can Really Do
- Best Budget 1080p Gaming PC Parts in 2026: 5 Picks
- Intel Kills BigDL: The Best Local-LLM Stack to Switch To in 2026
- Best CPU Cooler for AM5 and LGA1700 Overclocking (2026)
- Mistral Leanstral 1.5: Running the New Open Math Model on a 12GB RTX 3060
- Best CPU Cooler for Ryzen 7 5800X and 5700X in 2026
- Best Game Controller for PC in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090