GDSTIME Dual 40mm USB Fans w/ 3 Speed Control 5V Mini Brushless Cooling Fan
Bottom line: The GDSTIME Dual 40mm USB Fans: Two 40x40x10mm fans in one pack for multi-device or dual-intake setups; main trade-off: 6.12 CFM airflow is modest; not suited to high-heat enclosures.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two 40x40x10mm fans in one pack for multi-device or dual-intake setups
- ✓ 5V USB power works with laptops, power banks and standard USB chargers
- ✓ 3-speed control to trade airflow for lower noise
- ✓ Rated 25.8 dBA at 5500 RPM, low draw of 0.14A / 0.7W
- ✓ Metal finger grills and mounting screws included; 32mm hole spacing
Cons
- ✗ 6.12 CFM airflow is modest; not suited to high-heat enclosures
- ✗ Sleeve bearings, not ball bearings; 35,000-hour rated lifespan
- ✗ 35cm (1.15 ft) USB cord may be too short for some layouts
- ✗ USB plug only; no GPIO or 3-pin/4-pin fan header connector
Manufacturer description
The GDSTIME Dual 40mm USB Fan set gives you two compact 40x40x10mm (4010) brushless cooling fans for small spaces where heat builds up: Raspberry Pi cases, routers, Roku boxes, small projectors, VR gear, aquariums, terrariums, and cosplay helmets. Each fan runs on 5V USB power, so you can plug it into a laptop, power bank, or any standard USB outlet with no extra adapters. The 35cm (1.15 ft) cord reaches nearby ports, and a 3-speed controller lets you choose between more airflow and less noise. The spec sheet lists a top speed of 5500 RPM, 6.12 CFM of airflow, and 25.8 dBA of noise. Each fan…
SpecPicks Verdict
SpecPicks scored GDSTIME Dual 40mm USB Fans using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. GDSTIME's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these GDSTIME fans work with a Raspberry Pi?
Yes, the listing names Raspberry Pi as a use case. The fans plug into a 5V USB port instead of the GPIO header. Each 40x40x10mm fan has mounting holes 1.26 in. (32mm) apart, so check that your case accepts a 40mm fan.
Can I power these fans from a power bank?
Yes. They run on 5V USB power and work with laptops, power banks and standard USB outlets. Each fan draws 0.14A (0.7W), which is a light load for most power banks.
How loud are these 40mm USB fans?
The rated noise level is 25.8 dBA at the listed 5500 RPM. The 3-speed control lets you lower the speed if you need quieter operation.
How much airflow do they produce?
Each fan is rated for 6.12 CFM at 5500 RPM. That's enough for small enclosures like routers, streaming boxes, SBC cases and terrariums, but not for high-heat PC components.
Does it come with mounting hardware and how long is the cable?
Yes, mounting screws are included and each fan has a metal grill. The USB power cord is 35cm (1.15 ft) long. Check the product listing for current warranty terms.
Key Features
- WIDELY USED: 40x40x10mm usb coolng fans, ideal for cooling game consoles, VR gear, cosplay, helmets, raspberry pi, aquarium, router, small projectors and other DIY projects ventilation
- USB POWERED: 35cm/1.15ft USB power cord; 5V USB ports compatible with laptop, power bank and all standard USB outlets; don't need buy additional cords
- PROTECTION: Metal fan grill on the fan; Protect your fingers and fan blades; the center to center hole distance is 1.26 in.; Comes with mounting screws
- MINI SIZE: Compact lightweight, great for DIY cooling and small spaces, quiet 40mm usb cooling fans keep your system cool and extend the life
- QUIET: Dimension: 1.57 x 1.57 x 0.39 in. | Bearings: Sleeve | Current:0.14Amp | Power: 0.7W | Speed: 5500RPM | Airflow: 6.12CFM | Noise: 25.8dBA | Lifespan: 35000 hrs
Full Specifications
| Brand | GDSTIME |
|---|---|
| Model | GDA4010S05N55U359F-US |
| Voltage | 5 volts |
| Material | Plastic |
| MINI SIZE | Compact lightweight, great for DIY cooling and small spaces, quiet 40mm usb cooling fans keep your system cool and extend the life |
| Dimensions | 40x40x10mm |
| PROTECTION | Metal fan grill on the fan; Protect your fingers and fan blades; the center to center hole distance is 1.26 in.; Comes with mounting screws |
| Unit Count | 2 Count |
| Noise Level | 25.8 db |
| Part Number | GDA4010S05N55U359F-US |
| USB POWERED | 35cm/1.15ft USB power cord; 5V USB ports compatible with laptop, power bank and all standard USB outlets; don't need buy additional cords |
| Connectivity | USB |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 6.12 cfm |
| Compatible Devices | Cable Modem, Gaming Console, Laptop, Mini PC, VR Gear |
| Included Components | 2x USB Cooling Fans;2x Metal Guards;1x 2 in 1 USB Cable;8x Screws and Nuts |
| Power Connector Type | USB |
| Maximum Rotational Speed | 5500 rpm |
| Full listing title | GDSTIME Dual 40mm USB Fans w/ 3 Speed Control 5V Mini Brushless Cooling Fan | for VR Gear, Aquarium, Terrarium, Roku, Router, Raspberry Pi, Cosplay, Helmet Cooling Ventilation - 40x40x10mm, 4010 |
Hardware benchmark data
Ready to buy?
GDSTIME Dual 40mm USB Fans w/ 3 Speed Control 5V Mini Brushless Cooling Fan | for VR Gear, Aquarium, Terrarium, Roku, Router, Raspberry Pi, Cosplay, Helmet Cooling Ventilation - 40x40x10mm, 4010 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget AMD Gaming PC Upgrades in 2026: 5 Parts That Move the Needle
- Qwen3.6-27B at 80 TPS on RTX 5090: Is the Claim Real?
- CompactFlash-to-IDE Boot Drive: The Silent Win98 Build Upgrade
- RTX 5090 AI Build Guide: CPU, RAM, PSU & Cooling for Local Inference
- Best 4K Monitor for PS5 (4K/120Hz) in 2026
- Ryzen 5 2600 vs Ryzen 9 3900X: Do 12 Cores Buy CPU-Only 8B Inference?
- Shared ChatGPT & Claude Chats Are Spreading Malware — Run a Local LLM on a 12GB GPU Instead
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- Microsoft Signals 32GB RAM as the Windows 11 Gaming Baseline
- Ollama on a 12GB RTX 3060: Best Models and tok/s in 2026
- Ryzen AI Max+ 395 128GB vs Dual RTX 3060 for Local LLMs
- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Local LLM vs Claude in 2026: What an RTX 3060 12GB Rig Actually Replaces
- Best GPU for 1080p Esports in 2026: High-Refresh Without Overspending
- Linux vs Windows 11: AMD Ryzen 9 9950X3D Performance
- How to run Llama 3.1 8B on Arc B580
- Ryzen 5 5600G vs Ryzen 7 5700X for a No-GPU Home Server
- Best Wired Gaming Headset Under $50 for PC and Console in 2026
- Best GPU for a NAS or Homelab Running Local LLMs (2026)
- Halloween Talking Prop: Qwen3 4B on Jetson Orin Nano Super vs Raspberry Pi 5 16GB
- Best 2.5" SATA SSD to Upgrade a PS4 Pro in 2026
- Best Quiet PC Cooling Upgrades in 2026
- Beyond LLMs: How Agent Logic Scales Enterprise AI
- Imaging a Vintage IDE Drive to CompactFlash for a Silent Win98 Boot
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090