Bonsicoky
Bonsicoky 2Pcs 100W 4 Ohm Wirewound Resistors
Bottom line: The Bonsicoky 2Pcs 100W 4 Ohm Wirewound Resistors is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category, priced around $5.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by Bonsicoky's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Bonsicoky is a brand that pursues high quality and provides high-quality, reliable and practical hardware products for global customers. Our product quality and innovation will continue to improve, and in the future we will launch more high-quality hardware products. We hope you like Bonsicoky products too!FeatureThe shell of wirewound resistor is made of aluminum, which has good heat dissipation.They can be used in harsh environments.The wire wound power resistor widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry.High temperature resistant…
SpecPicks Verdict
SpecPicks scored Bonsicoky 2Pcs 100W 4 Ohm Wirewound Resistors using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. Bonsicoky's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- PACKAGE CONTENT - 2 x Aluminum Housed Wirewound Resistors - Size: 60 x 20 x 15mm/2.36" x 0.79" x 0.59" - Resistance Value: 4 Ohm - Power Rating: 100W
- HARD ALUMINUM HOUSING - The shell of wirewound resistor is made of aluminum, which has good heat dissipation and is suitable for cooling plate installation; they can be used in harsh environments.
- HIGH STABILITY - The high-temperature resistant wirewound resistor adopts a completely welded structure, and the resistor has strong operational stability and is not easy to damage the power supply. It is a good resistance compatible with the power supply of other equipment.
- WIDE RANGE OF USES - The 4 Ohm resistor widely used in doorbell, transformer, power supply, car LED, transducer, frequency converter, frequency divider, elevator, arena audio and automation equipment in industry.
Full Specifications
| Size | 100W 4 Ohm |
|---|---|
| Brand | Bonsicoky |
| Material | Aluminum |
| Dimensions | 60 x 20 x 15mm |
| Part Number | JIAWONG210401002 |
| Package Dimensions | 2.4 x 1.26 x 0.75 inches |
| Batteries Required? | No |
| Full listing title | Bonsicoky 2Pcs 100W 4 Ohm Wirewound Resistors, Aluminum Housed Load Resistor Screw Tap Chassis Mounte Resistors for Doorbell, Led, Power Supply Equipment |
Ready to buy?
Bonsicoky 2Pcs 100W 4 Ohm Wirewound Resistors, Aluminum Housed Load Resistor Screw Tap Chassis Mounte Resistors for Doorbell, Led, Power Supply Equipment is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Dump and Archive Your Retro PC's IDE Drives in 2026: A USB Adapter Workflow
- Asus ROG Xreal R1: 240Hz AR gaming glasses land
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Apple Intelligence Ships in China on Alibaba's Qwen: What It Means
- Best Sim Racing Wheel and Shifter for Beginners in 2026
- Running DeepSeek Distills Locally on a Ryzen 7 5800X + RTX 3060
- Best CPU cooler for the Ryzen 7 5800X in 2026
- Best GPU for 1440p Local Image Generation in 2026: Why the RTX 3060 12GB Still Wins on Value
- Build a Self-Hosted Security Camera on a Raspberry Pi 4 8GB in 2026
- Building a Local AI-Agent Eval Rig After AISI's Benchmark Warning
- Best Hardware for Local OCR and Document AI in 2026
- Kimi K3 Open Weights: What It Takes to Run It Locally
- Best Budget SATA SSD for Gaming in 2026
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- Can a 12GB RTX 3060 Run Gemma 4 31B? Quantization & Tok/s Reality Check
- GLM-5.2: The Open-Weights Model Built for Long-Horizon Agentic Tasks
- Best GPU for an AI rig in 2026 — the shortlist
- Adding a Manual Shifter to Your Sim Rig: Is the Thrustmaster TH8A Worth It for the G29?
- Is the RTX 3060 12GB Still Worth It for Gaming in 2026?
- Open-Source NVIDIA NVK Vulkan Driver Adds DLSS Support: What It Means for RTX 3060 Owners
- Best NVMe SSD for Local AI Model Storage in 2026
- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090