2Pcs Aluminum Case Chassis Mounted 100W Watt 12 Ohm Wirewound Resistor
Bottom line: The 2Pcs Aluminum Case Chassis Mounted 100W Watt 12 Ohm Wirewound Resistor: Two 100W 12 Ohm resistors per pack at 7.99 USD, not a single unit; main trade-off: 100W rating assumes heat sink mounting; unmounted it derates sharply.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two 100W 12 Ohm resistors per pack at 7.99 USD, not a single unit
- ✓ Aluminum housing with screw tabs bolts to a chassis or heat sink
- ✓ Non-inductive winding suits power supply and audio dummy-load work
- ✓ Tight 5 percent (J) tolerance on the 12 Ohm resistance value
Cons
- ✗ 100W rating assumes heat sink mounting; unmounted it derates sharply
- ✗ 60x15mm body plus 85mm tabs needs real chassis space to fit
- ✗ Fixed 12 Ohm only, so no adjustment for load tuning
- ✗ 3.3mm mounting holes require M3 hardware not included
Manufacturer description
With screw holes which can tighten the resistor against a chassis or heat sink for greater heat dissipation.High power load, non-inductive winding types, high insulating capacity, good performance in vibration. Widely used in Power supply, Transducer, Elevator, Arena audio and high requirement equipment Industry
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 2Pcs Aluminum Case Chassis Mounted 100W Watt 12 Ohm Wirewound Resistor, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Two 100W 12 Ohm resistors per pack at 7.99 USD, not a single unit"; the main trade-off is "100W rating assumes heat sink mounting; unmounted it derates sharply". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Package Content : 2pcs x Aluminum Housed Resistor
- Resistance Value : 12 Ohm; Power Rating: 100W; Resistance Tolerance: ± 5 percent (J)
- Body Size: 60x15mm / 2.36"x0.6" (L * D); Mounted Hole Size: 3.3mm/0.129"; Total Size: 85x21x17mm / 3.35"x0.8"x0.7" (L*W*T)
- Aluminum case has the screw tabs on it so you can tighten them against a chassis or heat sink for greater heat dissipation. Suitable for cooling plate installation
- This resistors features with high temperature resistance, strong overload capacity, high weather resistance, high weather resistance, low standard induction resistance and etc.
Full Specifications
| Size | 100W 12 Ohm |
|---|---|
| Brand | Dahszhi |
| Material | Aluminum |
| Body Size | 60x15mm / 2.36"x0.6" (L * D); Mounted Hole Size: 3.3mm/0.129"; Total Size: 85x21x17mm / 3.35"x0.8"x0.7" (L*W*T) |
| Dimensions | 85x21x17mm |
| Part Number | DH2107050125 |
| Package Content | 2pcs x Aluminum Housed Resistor |
| Resistance Value | 12 Ohm; Power Rating: 100W; Resistance Tolerance: ± 5 percent (J) |
| Package Dimensions | 2.87 x 1.42 x 0.75 inches |
| Batteries Required? | No |
Ready to buy?
2Pcs Aluminum Case Chassis Mounted 100W Watt 12 Ohm Wirewound Resistor is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Pentium II/III LAN Party Build Brand Profile: Why Creative and 3dfx Defined the Era
- RTX 4090 vs RX 7900 XTX
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- Kimi K3 Just Launched: What You Can (and Can't) Run Locally Instead
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- What Fits in 12GB VRAM? RTX 3060 Local LLM Model Guide (2026)
- Best Controller for PC Emulation and Retro Console Crossover (2026)
- RTX 3060 12GB vs Intel Arc B580 for 1080p gaming: FPS per dollar (2026)
- Best Wired Mouse and Pad for FPS in 2026: Logitech G502 Hero and SteelSeries QcK
- Samsung and SK Hynix Plan $590B Chip Push as Memory Prices Climb
- Ryzen 7 9800X3D Hits Record-Low Price — What It Means for AM4 Upgraders
- Imaging Vintage IDE Drives with a CompactFlash + USB Adapter
- Building a Period-Correct 1998 Voodoo2 SLI Rig (and Imaging Its Boot Drive)
- Steam Deck OLED vs ROG Xbox Ally X: 2026 Comparison
- Local LLM Inference on the RTX 3060 12GB: 2026 Quantization Playbook
- Ryzen 7 5700X vs 5800X for 1080p & 1440p Gaming in 2026
- Best Budget SSDs for Homelab and Proxmox Boot Drives in 2026
- How LAN Parties Died: A 2002-2008 Cultural Retrospective
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Best SSD to Upgrade a PS4 Pro: Samsung 870 EVO vs Crucial BX500
- Best Parts for a Long-Context Local LLM Workstation in 2026
- Frontier Models Cheat on Security Tests: Why You Should Eval Locally
- Raspberry Pi Projects for Teens: Best Builds 2026
- Intel-Scaler vLLM 0.21.0: What Changes for Local Arc + Intel GPU Rigs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090