Geekworm
Geekworm for Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only(Not Include Raspberry Pi)
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-04-23. Price and availability subject to change.
Bottom line: The Geekworm for Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only(Not Include Raspberry Pi) is a niche pick — read recent reviews before buying in the single-board computers category, priced around $29.00. Compare close alternatives before committing.
About this item Compatibility: X825 is compatible with Raspberry Pi 4 Model B (1GB/2GB/4GB/8GB) only, does not support Raspberry Pi 3; The version for Raspberry Pi 5 is X1100 Update: X825 V2.0 is the updated version from X825 V1.5. Metal case for X825 V2.0 is X825-C8. You can use X825 V2.0 to DIY your family NAS via RaspNAS or OpenMediaVault etc X825 V2.0 can support up to 4TB 2.5 inch SATA hard disk drives (HDD)/solid-state drive (SSD), on theory the SSD capacity is no limit, but SSD thickness is limited by the standoffs height and it's case User Manual: Google Geekworm Wiki and search X825…
SpecPicks Verdict
SpecPicks scored Geekworm for Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 inch SATA… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the single-board computers category. Geekworm's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Mixed or limited buyer feedback at this price point — focus your evaluation on recent reviews that specifically address build quality and long-term reliability, and shortlist one or two close alternatives before deciding.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ User Manual Google Geekworm Wiki and search X825 V2.0 for document and manual
- ✓ Backed by Geekworm's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Compatibility X825 is compatible with Raspberry Pi 4 Model B (1GB/2GB/4GB/8GB) only, does not support Raspberry Pi 3; The version for Raspberry Pi 5 is X1100
- Update X825 V2.0 is the updated version from X825 V1.5. Metal case for X825 V2.0 is X825-C8. You can use X825 V2.0 to DIY your family NAS via RaspNAS or OpenMediaVault etc
- X825 V2.0 can support up to 4TB 2.5 inch SATA hard disk drives (HDD)/solid-state drive (SSD), on theory the SSD capacity is no limit, but SSD thickness is limited by the standoffs height and it's case
- User Manual Google Geekworm Wiki and search X825 V2.0 for document and manual
- How to power RPi4 and X825 V2.0 5Vdc +/-5% ≥4A, Powered by Raspberry Pi 4 Type-C Power In port or DC jack of X825 V2.0; How to power RPi4 and X825 V2.0 and X735 5Vdc +/-5% ≥4A, Powered by X735 Type-C or DC Jack Power In port
Full Specifications
| ASIN | B091JSRQ9C |
|---|---|
| Brand | Geekworm |
| Color | Black(X825 V2.0) |
| Material | Metal |
| Item Weight | 48 Grams |
| Manufacturer | Geekworm |
| Built-In Media | 1 x USB 3.0 connector, 1 x X825 V2.0 Expansion Board, 2 x M3x6mm Screws, 4 x Spacers F/F M2.5x14mm, 8 x M2.5x6mm Screws |
| Hardware Platform | Raspberry Pi |
| Compatible Devices | Raspberry Pi 4 Model B |
| Data Transfer Rate | 6 Gigabits Per Second |
| Enclosure Material | Metal |
| Hardware Interface | USB |
| Warranty Description | 3 months |
| Hard Disk Form Factor | 2.5 Inches |
| Memory Storage Capacity | 8 GB |
| Supported Devices Quantity | 1 |
Ready to buy?
Geekworm for Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only(Not Include Raspberry Pi) is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
View Current Price on Amazon →
*Price sourced from Amazon.com. Last updated 2026-04-23. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- AMD Ryzen AI Max+ 395 vs RTX 3060 12GB for Local LLM Inference (2026)
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Sound BlasterX G6 for DOS and Win98 Retro Gaming: SBEMU and Real-Mode Audio
- Claude Opus 4.8 Ships, Tops GPT-5.5 on Intelligence Index
- Sound Blaster Audigy FX vs Sound BlasterX G6 for Retro Win98/XP Builds
- Best Budget Gaming Peripherals Under $50 in 2026
- Ryzen 7 5700X + RTX 3060 12GB: The Best Value 1080p Combo in 2026
- Logitech G502 Hero vs SteelSeries QcK: The Cheap FPS Setup That Still Wins in 2026
- Self-Host Jellyfin on the Raspberry Pi 4 8GB: Transcoding Limits
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: Best Controller for Emulation
- AI-Driven Win9x Driver Install: How Vision-LLMs Tame Vintage Installers (2026)
- Best Steam Deck Dock for 4K Desktop Gaming in 2026: JSAUX Docking Station Tested Against the Use Case
- Best GPU for a Homelab in 2026: AI, VMs & Budget Picks
- Intel Axes BigDL: Local-LLM Picks for Consumer GPUs in 2026
- Local LLM Inference on the RTX 3060 12GB: 2026 Quantization Playbook
- How to run Llama 3.1 70B on AMD Radeon RX 7900 XTX
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
- The vLLM MCP Vulnerability: What Local LLM Operators Need to Do
- Ryzen 7 5800X vs 5800X3D for 1440p Gaming: Which Should You Buy?
- Best CPU Cooler for Ryzen 7 5800X Overclocking in 2026
- Imaging Vintage IDE Drives to Preserve 90s Game CDs
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 3090
- Qwen 3.6 27B GGUF: BF16 vs Q4_K_M vs Q8_0 Compared
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090