Skip to main content
TOWOT Solder Wick Braid 10ft Desoldering Wick Braid Remover Tool With Flux No-Clean Soldering Wick Desolder Soldering 0.1 inch Width
TOWOT

TOWOT Solder Wick Braid 10ft Desoldering Wick Braid Remover Tool

Bottom line: The TOWOT Solder Wick Braid 10ft Desoldering Wick Braid Remover Tool ($5.39 on Amazon as of 2026-11-20 23:16 UTC): 100% copper braid with flat-stitch weave for fast heat transfer; main trade-off: single 0.1in width only; no narrow or wide options in the roll.

$5.39 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 100% copper braid with flat-stitch weave for fast heat transfer
  • ✓ No-clean flux leaves non-conductive, non-corrosive residue
  • ✓ 10ft roll at 0.1in width covers most through-hole and IC work
  • ✓ Pulls solder by capillary action without gouging PCB pads

Cons

  • ✗ Single 0.1in width only; no narrow or wide options in the roll
  • ✗ No-clean residue still shows on the board if you want a clean look
  • ✗ Consumable, so a heavy rework session eats through the 10ft fast
  • ✗ Needs a decent iron; low-wattage tips struggle to heat the braid

Manufacturer description

The TOWOT Solder Wick Braid gives you 10 feet of 0.1-inch desoldering braid for cleaning solder off boards without tearing up pads. The braid is built from 100% copper wire in a flat-stitch weave, which conducts heat quickly and pulls molten solder into the braid by capillary action rather than forcing you to fight it with a pump. That matters on the small-pitch PCB work retro rebuilds demand: lifting a socketed chip, clearing a through-hole before a fresh header, or correcting a bridged joint on a sound card without heat-soaking the surrounding traces. TOWOT builds the wick with a no-clean…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for TOWOT Solder Wick Braid 10ft Desoldering Wick Braid Remover Tool, so this read rests on the manufacturer's listed specs and the current price in the tools & maintenance category (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "100% copper braid with flat-stitch weave for fast heat transfer"; the main trade-off is "Single 0.1in width only; no narrow or wide options in the roll". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What width is this solder wick and is that a good general size?

It is 0.1 inch wide across the full 10-foot roll. That is the common all-purpose size, suitable for header pins, IC legs, and through-hole pads, though very fine-pitch SMD work is usually easier with a narrower braid.

Do I have to clean the board after using it?

No. TOWOT uses a no-clean flux, and the listing states the residue left behind is minimal, non-conductive, and non-corrosive, so no cleaning step is required.

Will this damage the pads or traces on an old PCB?

The braid works by capillary action, wicking molten solder up into the copper rather than scraping it off, which is why it is described as suitable for small PCB boards without damaging them. Keep contact time short and use a properly heated iron.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
  • Warranty :If you have any questions, please feel free to contact us at any time. Thank you!

Full Specifications

BrandTOWOT
Style‎W 0.10'' L 9.8'
Material‎copper
Part Number‎TOWOT
Batteries Included?‎No
Batteries Required?‎No
Item Package Quantity‎1
Full listing titleTOWOT Solder Wick Braid 10ft Desoldering Wick Braid Remover Tool With Flux No-Clean Soldering Wick Desolder Soldering 0.1 inch Width

Ready to buy?

TOWOT Solder Wick Braid 10ft Desoldering Wick Braid Remover Tool With Flux No-Clean Soldering Wick Desolder Soldering 0.1 inch Width is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $5.39

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →