Zunate PCE8SAT-M01 PCI-E to SATA 3.0 Expansion Card
Bottom line: Per its Amazon listing, the Zunate PCE8SAT-M01 PCI-E to SATA 3.0 Expansion Card: supports communication speeds of 6.0 Gbps; this 8 ports PCI-E to SATA 3.0 card has a complete after-sales service.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Supports communication speeds of 6.0 Gbps
- ✓ This 8 ports PCI-E to SATA 3.0 card has a complete after-sales service
- ✓ Backed by Zunate's warranty and support channels
Cons
- ✗ Needs a free PCIe slot — check which of your board's slots are wired for it
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Zunate PCE8SAT-M01 PCI-E to SATA 3.0 Expansion Card, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Strong Compatibilitys】This PCIE SATA card with 8pcs SATA3.0 expansion interface. Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0; PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0.
- 【6.0 Gbps SATA 3.0 PCIe Card】Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps; supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
- 【AHCI1.0 and IDE Modes】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching and hot plug.
- 【Wide Applications】This PCIe to SATA controller expansion card compatible with SATA6G, 3G and 1.5G hard drives.User with SATA3.0 data cable for best results.Fit For Fit For Ubuntu
- 【100% Satisfaction Guarantee】This 8 ports PCI-E to SATA 3.0 card has a complete after-sales service, If you have any questions about the product or you are not satisfied,please us at any time, we will provide you with the best solution.Your satisfaction is our main concern.
Full Specifications
| Brand | Zunate |
|---|---|
| Style | Classic |
| Weight | 6g |
| Style Name | Classic |
| Model Number | PCE8SAT M01 |
| Compatibility | Switch |
| Mfr Part Number | Zunategzmcuf7hy07408 |
| Compatible Devices | Personal Computer, Laptop, Hard Drive |
| Hardware Interface | PCI |
| Full listing title | PCE8SAT-M01 PCI-E to SATA 3.0 Expansion Card, 8-Port, Compatible with SATA 6G/3G/1.5G, PCI-E 1X 2X 4X 8X 16X Interface |
Ready to buy?
PCE8SAT-M01 PCI-E to SATA 3.0 Expansion Card, 8-Port, Compatible with SATA 6G/3G/1.5G, PCI-E 1X 2X 4X 8X 16X Interface is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Anthropic: AI Builds Working Exploits in Hours, Not Weeks
- Qwen3 MTP on a Single RTX 3060 12GB: What the New Benchmark Numbers Actually Mean
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026
- Intel i7-9700K vs Ryzen 7 5700X for 1080p Gaming (2026)
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- Best GPU for 1080p High-Refresh Esports 2026: RTX 3060 12GB
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- 8BitDo Pro 2 vs DualSense for PC Emulation: Which Controller Wins
- Alienware Area-51 RTX 5090 Gets $2,580 Off — Worth It?
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- Building a Period-Correct 2001 GeForce 3 + Windows 98 SE Gaming Rig
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- The Pentium III 1 GHz Race: When Intel and AMD Broke the Gigahertz Barrier in the Same Week
- AI-Driven Driver Hunting on WinXP: Using Vision LLMs to Install Audigy 2 ZS Without Internet
- Best Mid-Range CPU for Streaming and Gaming in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- ASRock Arc B580 12GB vs RTX 3060 12GB for 1440p Gaming in 2026
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- How to Find and Join Active UT99 and UT2004 Servers in 2026
- Gemma 4 Stealth Update Fixes Tool Calling: What Changes Locally
- Is the RTX 3060 12GB Still the Best Sub-$400 AI Card in 2026?
- How to Archive Your Old IDE and CompactFlash Retro PC Drives in 2026
- Logitech G502 Hero vs SteelSeries QcK: The Cheap FPS Setup That Still Wins in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090