uxcell PCI Slot Covers with Screws for PC Case Airflow and Dustproof Black 5pcs
Bottom line: The uxcell PCI Slot Covers is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ [MATERIAL] Hard steel material covers are good for improving the heat dissipation.
- ✓ Backed by uxcell's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Description:Suitable for the airflow of home computer case.Hard steel material covers are good for improving the heat dissipation.The hard steel dust Screen come with screws, which is helpful to install.Correct the position of the bezel, then turn to fix the screw.Note:The installation position of the vent is the slot of the graphics card. Please be careful not to over tighten the screw to avoid slipping.Application:Suitable for filling the empty PCI slots in the PC.Specification:Material: Hard SteelEach Cover Comes with A ScrewThickness: 0.5 mmOverall Size: 121 x 22 x 12 mm / 4.76 x 0.87 x…
SpecPicks Verdict
SpecPicks scored uxcell PCI Slot Covers using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. uxcell's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- [PARAMETER] Each Cover Comes with A Screw; Thickness: 0.5 mm; Overall Size: 121 x 22 x 12 mm / 4.76 x 0.87 x 0.47 inch.
- [MATERIAL] Hard steel material covers are good for improving the heat dissipation.
- [NOTE] The installation position of the vent is the slot of the graphics card.
- [APPLICATION] Suitable for filling the empty PCI slots in the PC.
- [OPERATION] Can fit in most computer cases, Easy to install.
Full Specifications
| Brand | uxcell |
|---|---|
| Color | Black |
| Model | a21020200ux0229 |
| Material | Hard Steel |
| Dimensions | 121 x 22 x 12 mm |
| Metal Type | Alloy Steel |
| Unit Count | 5 Count |
| Part Number | a21020200ux0229 |
| Compatibility | PC |
| Material Type | Hard Steel |
| Exterior Finish | Alloy Steel |
| Number Of Items | 5 |
| Number of Pieces | 5 |
Ready to buy?
uxcell PCI Slot Covers with Screws for PC Case Airflow and Dustproof Black 5pcs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- GLM-5.2 on an RTX 3060 12GB: Can a Budget Card Run Long-Horizon Agents?
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
- NVIDIA RTX PRO 6000 Blackwell vs RTX A6000: Is 96 GB Worth $4,000 More?
- Best 1440p Monitor for the RTX 3060 in 2026: Picks That Actually Match
- SNES Classic vs Sega Genesis Mini in 2026: Which Is Worth It?
- Raspberry Pi 5 Secondary Monitor Setup Guide (2025)
- KDE KWin Gaming Patches 2026: Linux Latency vs Windows
- Core i7-9700K vs Ryzen 7 5800X for 1440p Gaming in 2026
- Best 4K Gaming Monitor Under $700 in 2026
- ASRock Phantom Gaming 360 LCD Cooler Debuts With Strong Numbers
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 4090
- AMD Ryzen AI Max+ PRO 495 192GB: What the PassMark Leak Tells Us
- Best Retro PC Storage Adapters in 2026: IDE, SATA & CompactFlash Picks
- Best GPU for Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- Run Kimi K2.7 Code Locally: Ollama vs llama.cpp on RTX 3060
- Why That Game Boy Clone Runs Too Fast — and the Crystal Fix
- HyperX QuadCast 2 vs Blue Yeti for Twitch in 2026
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- ComfyUI on a 12GB RTX 3060: SDXL and Flux Image Gen Benchmarked
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- Inkling's 975B Open-Weight Speech Model — and the 12GB Rig That Transcribes Free
- Build a Pi Zero W Handheld Retro Emulator in 2026: Full Parts List and Setup
- Ryzen 5 5600G as a Budget Local-LLM Host: iGPU + System RAM in 2026
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090