MOGAOPI Desoldering Wick
Bottom line: The MOGAOPI Desoldering Wick: 6-in-1 kit: 2 solder braids, solder wire, pump, spare tip, protective tube; main trade-off: manual pump needs practice for clean single-pull desolders.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 6-in-1 kit: 2 solder braids, solder wire, pump, spare tip, protective tube
- ✓ One-handed trigger pump works for right- or left-handed use
- ✓ 2.5mm x 1.5m copper braid with fine weave for strong capillary wicking
- ✓ ABS body with sweat-absorbing sponge grip for longer sessions
Cons
- ✗ Manual pump needs practice for clean single-pull desolders
- ✗ 2.5mm braid too wide for tight fine-pitch SMD pads
- ✗ Nylon nozzle can soften if held against hot joints too long
- ✗ No heat source included; requires your own soldering iron
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOGAOPI Desoldering Wick, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "6-in-1 kit: 2 solder braids, solder wire, pump, spare tip, protective tube"; the main trade-off is "Manual pump needs practice for clean single-pull desolders". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 6 in 1 Solder Removal Tool: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts
- Desoldering Wick with Copper Braid: Solder wire, replacement tip, 2pcs solder braid 2.5mm Width, 1.5m Length, copper wick has fine braid design to promote strong capillary action to pull in excess solder
- One handed solder sucker with powerful suction: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome
- Body with Non slip Sponge and Nylon Nozzle Solder Wick: The body of the desoldering vacuum pump is made of ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one handed use
- Widely used Solder Remover: The Desoldering Wick Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
Full Specifications
| Size | 206x20mm |
|---|---|
| Brand | MOGAOPI |
| Color | 6 in 1 Kit |
| Material | ABS Plastics |
| Part Number | 366D |
| Item Package Quantity | 1 |
| Full listing title | Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool |
Ready to buy?
Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget SATA SSD for Everyday Upgrades (2026)
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- Best SSD for 2000s LAN Party PC Builds (2026)
- AMD Ryzen 9 9950X3D2 on Linux vs Windows 11: Why the Penguin Wins
- Best Game Controller for PC and PS5 in 2026
- Best CPU Cooler for the Ryzen 7 5700X: Noctua vs DeepCool vs CoolerMaster
- Best Sim Racing Wheel Setup for Beginners in 2026
- Ryzen 7 5800X vs Core i7-9700K for a 24/7 Game Server: Which Hosts More Players?
- GPT-5.5-Cyber vs Mythos: Can You Run Cyber-Eval Models Locally?
- Best CPU Cooler for a Ryzen 7 5800X (AM4) in 2026
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- RetroArch PS2 Emulation: Setup, BIOS & Performance Guide
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
- RTX 5070 vs 5080: Which GPU Fits Your Build?
- Best Parts for an Always-On Local LLM Server in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X vs Ryzen 7 5800X for 1080p Gaming in 2026
- Logitech G920 vs HORI Racing Wheel: Best First Sim Wheel?
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- Sound Blaster Audigy FX in a Period-Correct WinXP Build: 2026 Install and Tuning Guide
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
- Gemma 4 31B Creative-Writing Finetunes on RTX 3060 12GB
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090