AEDIKO 6pcs 4010 DC 12V 3D Printer Cooling Fan Mini Brushless Fan 40x40x10mm
Bottom line: Per its Amazon listing, the 6pcs 4010 DC 12V 3D Printer Cooling Fan Mini Brushless Fan 40x40x10mm: wide Application: DC 12v Brushless Cooling Fan widely used for 3D Printer; package Contents: 6pcs DC Brushless Cooling Fan 12V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Mini Cooling Fan
- ✓ Backed by AEDIKO's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 6pcs 4010 DC 12V 3D Printer Cooling Fan Mini Brushless Fan 40x40x10mm, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Mini Cooling Fan
- High Quality: This Cooling Fan Made of High Quality Plastics with High End Bearings, Which make Cooling Fan Can Run Continuously at High Speeds Without Hassle or Concern
- Easy to Install: Cooling Fan come with 2 Pin 30cm Wire Cable and the Cable with 2 Pin PH2.5 Power Connector ,Plug and Play ,Very Easy to Install
- Wide Application: DC 12v Brushless Cooling Fan widely used for 3D Printer,DVR,NAS,other PC CPU Server Cooling Dissipation,Anywhere & Electronic that Need Cooling
- Package Contents: 6pcs DC Brushless Cooling Fan 12V, If You Have Any Question for the Product, Please Feel Free to Contact US, We Will Do Our Best for You
Full Specifications
| Brand | AEDIKO |
|---|---|
| Model | AE19583 |
| Voltage | 12 Volts |
| Material | Plastic |
| Dimensions | 40x40x10mm |
| Noise Level | 27 Decibels |
| Part Number | AE19583 |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Easy to Install | Cooling Fan come with 2 Pin 30cm Wire Cable and the Cable with 2 Pin PH2.5 Power Connector ,Plug and Play ,Very Easy to Install |
| Number of Items | 6 |
| Package Contents | 6pcs DC Brushless Cooling Fan 12V, If You Have Any Question for the Product, Please Feel Free to Contact US, We Will Do Our Best for You |
| Wide Application | DC 12v Brushless Cooling Fan widely used for 3D Printer,DVR,NAS,other PC CPU Server Cooling Dissipation,Anywhere & Electronic that Need Cooling |
| Air Flow Capacity | 5.75 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Included Components | fan |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 6000 RPM |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| Full listing title | 6pcs 4010 DC 12V 3D Printer Cooling Fan Mini Brushless Fan 40x40x10mm with 2 Pin Terminal for 3D Printer, DVR and Other Small Appliances |
Benchmark data for other processors
Ready to buy?
6pcs 4010 DC 12V 3D Printer Cooling Fan Mini Brushless Fan 40x40x10mm with 2 Pin Terminal for 3D Printer, DVR and Other Small Appliances is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for the Ryzen 7 5800X3D in 2026: No-Bottleneck Picks
- Best GPU for DeepSeek-R1 32B (2026)
- GPT-5.6 Rollout Now Requires US Government Sign-Off, Customer by Customer
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- Build a PiKVM V3 Device for Remote Server Management (2026)
- Local LLM vs Claude in 2026: What an RTX 3060 12GB Rig Actually Replaces
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- Best Budget Upgrades to Revive an Old Gaming PC in 2026
- Legion Go vs Steam Deck vs ROG Ally: 2026 Buying Guide
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Best CPU for AI Inference Workstations in 2026
- Best Apartment Sim Racing Wheel Setup: Quiet and Clamp-On (2026)
- Don't Buy Cheap SSDs: Hidden Risks Explained (2026)
- RTX 3060 12GB in 2026: Is It Still a 1080p Value Champion?
- KDE Plasma 6.7 X11 vs. Wayland NVIDIA Gaming on CachyOS
- Alien: Isolation on Steam Deck: Best Settings for 2025
- Adding USB Audio to a Retro Windows XP Gaming PC: Sound BlasterX G6
- Best GPU for Running Llama 3.1 8B Locally on a Budget (2026)
- Best Budget SATA SSD for Everyday Upgrades (2026)
- RTX 5090 vs RTX 3090: Specs, Gaming & AI Compared (2026)
- KOORUI 27" 4K QD-Mini LED: Is a Budget 4K Gaming Monitor Enough for an RTX 3060?
- Best Budget Gaming Peripherals Under $100 in 2026
- Best CPU Cooler for Ryzen 7 5800X and 5700X in 2026
- Best Sim Racing Wheel + Shifter Combo Under $400 in 2026: 5 Setups for iRacing, ACC, and GT3
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090