6pcs 4010 DC 12V Mini Brushless Cooling Fan 40x40x10mm Hydraulic Bearing Fan RGB LED
Bottom line: Per its Amazon listing, the 6pcs 4010 DC 12V Mini Brushless Cooling Fan 40x40x10mm Hydraulic ($9.99 on Amazon as of 2026-11-21 11:24 UTC): hydraulic Bearing Fan: Rated Voltage: DC 12V; wide Application: DC 12V Brushless Cooling Fan widely used for 3D Printer.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Hydraulic Bearing Fan: Rated Voltage: DC 12V
- ✓ Wide Application: DC 12V Brushless Cooling Fan widely used for 3D Printer
- ✓ Backed by AEDIKO's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 6pcs 4010 DC 12V Mini Brushless Cooling Fan 40x40x10mm Hydraulic…, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Hydraulic Bearing Fan: Rated Voltage: DC 12V, 0.06A; Speed:5000RPM; Noise:20.1dBA; Bearing: Hydraulic; Size:40x40x10mm
- High Quality: This Cooling Fan Made of High Quality Plastics with High End Bearings, Which make Cooling Fan Can Run Continuously at High Speeds Without Hassle or Concern
- Easy to Install: Cooling Fan come with 2 Pin 30cm Wire Cable and the Cable with 2 Pin XH2.54 Power Connector ,Plug and Play ,Very Easy to Install
- Wide Application: DC 12V Brushless Cooling Fan widely used for 3D Printer,DVR,NAS,other PC CPU Server Cooling Dissipation,Anywhere & Electronic that Need Cooling
- Package Contents: 6pcs 12V DC Hydraulic Bearing Cooling Fan, If You Have Any Question for the Product, Please Feel Free to Contact US, We Will Do Our Best for You
Full Specifications
| Brand | AEDIKO |
|---|---|
| Model | AE19583 |
| Voltage | 12 Volts |
| Material | Plastic |
| Dimensions | 40x40x10mm |
| Unit Count | 1 Count |
| Noise Level | 20 Decibels |
| Part Number | AE19583 |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Easy to Install | Cooling Fan come with 2 Pin 30cm Wire Cable and the Cable with 2 Pin XH2.54 Power Connector ,Plug and Play ,Very Easy to Install |
| Number of Items | 6 |
| Package Contents | 6pcs 12V DC Hydraulic Bearing Cooling Fan, If You Have Any Question for the Product, Please Feel Free to Contact US, We Will Do Our Best for You |
| Wide Application | DC 12V Brushless Cooling Fan widely used for 3D Printer,DVR,NAS,other PC CPU Server Cooling Dissipation,Anywhere & Electronic that Need Cooling |
| Air Flow Capacity | 5.75 Cubic Feet Per Minute |
| Compatible Devices | Printer |
| Power Connector Type | 2-Pin |
| Hydraulic Bearing Fan | Rated Voltage: DC 12V, 0.06A; Speed:5000RPM; Noise:20.1dBA; Bearing: Hydraulic; Size:40x40x10mm |
| Maximum Rotational Speed | 5000 RPM |
| Full listing title | 6pcs 4010 DC 12V Mini Brushless Cooling Fan 40x40x10mm Hydraulic Bearing Fan RGB LED with 2 Pin Terminal for 3D Printer, DVR, PC, CPU |
Benchmark data for other processors
Ready to buy?
6pcs 4010 DC 12V Mini Brushless Cooling Fan 40x40x10mm Hydraulic Bearing Fan RGB LED with 2 Pin Terminal for 3D Printer, DVR, PC, CPU is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- DeepSeek Seeks More Cash Weeks After $7B Round
- Raspberry Pi Zero W Projects for Beginners in 2026
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- Patch-to-Exploit in Hours: Why a Local Security LLM Rig Now Makes Sense
- Steam Machine 2025 Review: Couch Gaming and the 4K Question
- Iris-mini vs Iris-pro on an RTX 3060 12GB: Which Open-Weight Search Agent Fits 12 GB VRAM
- Best Controller for Forza Horizon 6 on PC (2026)
- Kingston 2GB DDR Modules: Identifying and Buying RAM for a 2004-Era Retro PC
- Best CPU Coolers for High-TDP Gaming Builds in 2026
- Mac Mini M4 vs RTX 3060 12GB for Local LLMs: Which Actually Wins?
- Ryzen 5 5600G vs Ryzen 7 5700X for a 24/7 LLM Server
- Troubleshooting a Vintage WinXP Retro PC That Won't Boot: Driver Verifier, BIOS, and IDE Recovery
- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- Modern PC Builds vs Period-Correct Retro Rigs: A 2026 Comparison
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
- GPU & CPU Upgrade ROI: Cost-per-FPS Calculator Guide
- Intel Arc Pro B70 Linux Gaming Performance 2026
- Best Budget Gaming Monitors Under $300 for 1080p in 2026
- Expanding the SNES Classic and Genesis Mini Library in 2026
- MSI Raider 16 Max HX Review: Elite Gaming and Creator Power
- Best PC Gaming Peripherals Under $50 in 2026
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Crucial BX500 vs Samsung 870 EVO: Best 2.5" SATA SSD for a Budget Build
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090