Jahour
Ender 5 Axial Cooling Fan - 40x40x10MM, 24V with Active Cooling Fan Duct for Ender-5 3D Printer
Bottom line: The Jahour Ender 5 Axial Cooling Fan: Exact 4010 form factor (40x40x10mm) for Ender-5 extruder and hotend mounts; main trade-off: 24V only, so 12V printers and PC fan headers are out.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Exact 4010 form factor (40x40x10mm) for Ender-5 extruder and hotend mounts
- ✓ 24V DC native, 0.06A draw wires straight to Ender-5 board headers
- ✓ 25dBA rated, quieter than the stock fan it replaces
- ✓ Ships with an active cooling fan duct, not just the bare fan
- ✓ 1m cable with SM2.54 2-terminal connector reaches without an extension
Cons
- ✗ 24V only, so 12V printers and PC fan headers are out
- ✗ Plastic frame and blades, less rigid than metal-framed 4010 fans
- ✗ Duct is cut for Ender-5 geometry, may need refitting on other printers
- ✗ Jahour is an unbranded aftermarket part with no stated warranty term
Manufacturer description
Ender 5 4010 Fan kit ：Voltage: DC 24VCable Length: 1mSize: 40X40X10mmMaterials: PlasticNoise Level: 25 dBUse For: Ender 5Connector: 2 Terminal Connector with SM2.54Advantage:Ender-5 Extruder Nozzle Fan,easy to install, Low noise, high-efficiency heat dissipation,good repair replacement accessory.Ender 5 3D Printer Cooling Fan with premium barring for absolute reliability and longevity. No more filament jams because of heat creeps, high-intensity work.Ender 5 Extruder Hotend Fan kit suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place. ventilation of Small PC…
SpecPicks Verdict
SpecPicks scored Jahour Ender 5 Axial Cooling Fan using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Jahour's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Work with: Ender-5 Extruder Nozzle Fan.Easy to install, Low noise, high-efficiency heat dissipation,good repair replacement accessory.
- Size: 40mm x 40mm x 10mm , Noise: 25dBA, Brushless DC Fan Rated Voltage: DC 24V, Current: 0.06A,Cable Length: 1m.
- Widely Used: Suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place. ventilation of Small PC Case and any small electronic equipment cooling ventilation.
- High Quality: Ender 5 3D Printer Cooling Fan with premium barring for absolute reliability and longevity. No more filament jams because of heat creeps, high-intensity work.
- Excellent Service: Ender 5 4010 Fan kit has undergone a rigorous quality control ex works . If need further please fell free contact us, we very happy to assist you.
Full Specifications
| Size | 40mm x 40mm x 10mm , Noise: 25dBA, Brushless DC Fan Rated Voltage: DC 24V, Current: 0.06A,Cable Length: 1m. |
|---|---|
| Brand | Jahour |
| Model | Ender 5 4010 Cooling Fan |
| Voltage | 24 Volts (DC) |
| Wattage | 1.44 watts |
| Material | Materials: Plastic |
| Work with | Ender-5 Extruder Nozzle Fan.Easy to install, Low noise, high-efficiency heat dissipation,good repair replacement accessory. |
| Dimensions | 40x40x10mm |
| Unit Count | 1.0 Count |
| Noise Level | 25 Decibels |
| Part Number | Ender 5 4010 Cooling Fan |
| Compatibility | PC |
| Material Type | Materials: Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Excellent Service | Ender 5 4010 Fan kit has undergone a rigorous quality control ex works . If need further please fell free contact us, we very happy to assist you. |
| Compatible Devices | Printer |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 7000 RPM |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
Ready to buy?
Ender 5 Axial Cooling Fan - 40x40x10MM, 24V with Active Cooling Fan Duct for Ender-5 3D Printer is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Hackaday Europe 2026: Building a Retro PC From Scratch
- Best Budget Gaming PC Parts in 2026: A Ryzen + RTX 3060 Build
- Build a Real-Time Flight Tracker (ADS-B) on a Raspberry Pi 4 in 2026
- Best Mechanical Keyboard for Office and Gaming Crossover (2026)
- Gaming PC Build 2026: The Reddit-Consensus Parts List
- Best Noctua Cooling Products in 2026: A Brand Buying Guide
- ZOTAC RTX 3060 Twin Edge vs MSI Ventus 2X: Which 12GB Card for a Quiet Build?
- Ryzen 7 5800X vs 5700X for Streaming and Gaming in 2026
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- Best Budget Streaming Setup in 2026: 5 Picks Under Budget
- LEGO Batman: Legacy of the Dark Knight Steam Deck FPS
- Is the RTX 3060 12GB Still Worth It for 1080p and 1440p Gaming in 2026?
- Kimi K3 Just Launched: What You Can (and Can't) Run Locally Instead
- Sound Blaster Audigy FX vs Sound BlasterX G6: Picking a Card for Retro and Modern Dual-Boot
- vLLM 0.21 Adds Intel GPU Support: What It Means for Budget AI Rigs
- Best SSD for Steam Deck OLED Expansion in 2026: SATA Adapter vs M.2 2230
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K for PS5 and PC Gaming
- Best PC Game Controllers for 2026: 5 Picks Ranked
- Best 4K Monitor Under $400 for Console & PC Gaming 2026: SANSUI vs KOORUI vs ASUS TUF
- Ryzen AI Max 385 Mini PC: Specs and What It's Really For
- How to run Llama 3.1 70B on Apple M4 Max
- Ryzen AI Max+ 395 Specs: Full Breakdown and Comparison
- Started a Homelab a Month Ago — Is a Ryzen 5 5600G Enough?
- Claude Code + Fable 5 Ported Command & Conquer to iOS in Hours: What Local Coding Rigs Need
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090