JEBUTU
JEBUTU Overhead Camera Mount Desk Stand
Bottom line: The JEBUTU Overhead Camera Mount Desk Stand ($18.98 on Amazon as of 2026-10-06): Overhead arm reaches 13 in for true top-down camera, webcam and phone shots; main trade-off: 0.5kg (1.1 lb) max load rules out DSLRs and heavier rigs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Overhead arm reaches 13 in for true top-down camera, webcam and phone shots
- ✓ Stand height adjusts from 12.8 in to 21.65 in for flexible framing
- ✓ 360° ballhead plus adapter knob dial in the exact angle
- ✓ C-clamp opens to 1.77 in, mounts to a desk with no drilling
- ✓ Kit bundles ballhead, phone holder, arm adapter and clamp in one box
Cons
- ✗ 0.5kg (1.1 lb) max load rules out DSLRs and heavier rigs
- ✗ C-clamp tops out at 1.77 in, too narrow for thick desktops
- ✗ Steel-and-ABS arm can flex or sag when fully extended
- ✗ Standard 1/4 in thread may need an adapter for some cameras
SpecPicks Verdict
SpecPicks scored JEBUTU Overhead Camera Mount Desk Stand using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. JEBUTU's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- What You Get: (1 x)C Clamp / (1 x) Camera Desk Mount Stand / (1 x) Overhead Holding Arm / (1 x) Holding Arm adapter / (1 x) Phone Holder / (1 x) 360°Ballhead
- Multiple Combinations: You can put a camera on desktop mount stand; With a overhead arm, you can install a Ballhead to get the best angle and connect with a ring light/Webcam. The holding arm bottom has a 1/4" hole to connect the desktop stand and get more high
- Angle Adjustable:JEBUTU overhead camera desk mount support with 360° Ballhead and holding arm adapter that you can adjust a suitable angle by it. Adjusted the adapter knob at the connect of the overhead holding arm to adjust a perfect angle
- Upgraded Desk Mount Stand Parameters: The max opening of C-Clamp is 1.77"/4.5cm, you can clip it on table. The max length of Holding Arm is 13"/33cm. The height of the desktop stand can be adjusted from 12.79"/32.5cm to 21.65"/55cm. Max Load:0.5Kg
- Widely Application: JEBUTU upgraded camera desk mount is made of high-quality steel and ABS. Suitable for a live web conference, makeup, streaming, online class, drawing, calligraphy, baking, cooking, crafting, videos, etc
Full Specifications
| Brand | JEBUTU |
|---|---|
| Color | Black |
| Weight | 0.5kg |
| Model Name | JEBUTU |
| What You Get | (1 x)C Clamp / (1 x) Camera Desk Mount Stand / (1 x) Overhead Holding Arm / (1 x) Holding Arm adapter / (1 x) Phone Holder / (1 x) 360°Ballhead |
| Mounting Type | Tabletop Mount |
| Item Dimensions | 13 x 1.8 x 21.65 inches |
| Compatible Devices | Smartphone, Microphone, Video Light, Webcam, Ring Linght |
| Enclosure Material | Alloy Steel |
| Additional Features | Adjustable, Lightweight, Non-Slip, Rotatable |
| Water Resistance Level | Not Water Resistant |
| Compatible Phone Models | iPhone 7 |
| Weight Capacity Maximum | 0.5 Kilograms |
| Compatible with Vehicle Type | Automobile |
| Full listing title | Overhead Camera Mount Desk Stand, Camera Arm Desk Mount Clamp Stand with 360°Adjustable Magic Arm, Webcam Arm Mount Stand w Ballhead Phone Mount for Desk Logitech Microphone Video Light Cell Phone |
Ready to buy?
Overhead Camera Mount Desk Stand, Camera Arm Desk Mount Clamp Stand with 360°Adjustable Magic Arm, Webcam Arm Mount Stand w Ballhead Phone Mount for Desk Logitech Microphone Video Light Cell Phone is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc A770 for Local LLMs: 2026 Benchmark Guide
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- Best Mouse Pad for FPS and MOBA Esports Players (2026)
- Gemma-4-Harmonia-31B Heretic: What the Uncensored Merge Adds Over Base Gemma 4
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- Best USB Microphones for Streaming and Podcasting (2026)
- RTX 4090 AI Workstation vs AMD MI300X: 2025 Guide
- Building a Silent Win98/XP Boot Drive: CompactFlash + IDE Adapter Setup
- Best GPU for 1080p 240Hz Esports: RTX 3060 12GB Build (2026)
- AI Coding Agents Find the Right File but Miss the Lines — What Local Code Models on a 12GB GPU Get Wrong
- Best GPU for Llama 70B Local Inference in 2026: RTX 3060 12GB Dual vs RTX 3090 vs Gorgon Halo
- Acti Brings AI Agents Into Your Smartphone Keyboard
- Asus RTX 5060 Near-MSRP Deal Has Expired
- Qwen 3.6 35B-A3B KV Cache Deep Dive: Memory, PPL, and Quantization Tradeoffs
- How Fast Is Local LLM Inference on a Ryzen 7 5800X (CPU-Only, No GPU)?
- SteamOS Boots on Intel Hardware in Community Hack
- Ollama vs vLLM vs llama.cpp on a 12GB GPU: Which Wins for One User?
- From AWE32 to BlasterX G6: The Sound Blaster Lineage for Modern Retro Rigs
- Home Assistant Air Quality Monitor: 2025 Setup Guide
- Best Gaming Keyboards for Home Office and Esports (2026)
- llama.cpp on a 12GB RTX 3060: llama-bench Setup and Measured tok/s
- Intel Arc LLM Performance: A770, B580 & Pro B60 Guide 2025
- Best PC Streaming Starter Kit in 2026: 5 Picks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090