Bracwiser Monitor Mount Single Fully Adjustable Arm Monitor Arm Fits One Screen 13-32 inch 22lbs for Computer Screen 13 15 17 19 20 22 23 24 26 27 30 32 inch VESA 75 100 (MD71221)
Bottom line: The Bracwiser Monitor Mount Single Fully Adjustable Arm Monitor Arm Fits ($33.99 on Amazon as of 2026-10-06): Handles 13-32 inch screens up to 22 lbs, so one arm covers most desk setups; main trade-off: 22 lb ceiling rules out heavy 32 inch curved and ultrawide panels.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Handles 13-32 inch screens up to 22 lbs, so one arm covers most desk setups
- ✓ Full 360 degree rotation supports portrait mode for code and long documents
- ✓ 1200mm height range lifts the panel to eye level on tall or standing desks
- ✓ C-clamp and grommet base both included, no separate purchase for either desk type
Cons
- ✗ 22 lb ceiling rules out heavy 32 inch curved and ultrawide panels
- ✗ Requires VESA 75x75 or 100x100 holes; monitors without them need an adapter
- ✗ C-clamp caps out at 3.86 inch desk thickness, too thin for some butcher-block tops
- ✗ Grommet install needs a 1.65 inch hole, meaning you drill into the desk
Manufacturer description
The Bracwiser MD71221 single monitor arm clears your desk of a factory stand and hands the space back to you. Its steel arm carries one 13 to 32 inch screen up to 22 pounds, so it covers everything from a 19 inch secondary panel to a 32 inch main display without swapping hardware. Mounting uses the standard VESA 75x75mm or 100x100mm hole pattern found on the back of most monitors. Positioning is where this Bracwiser monitor mount earns its keep: plus or minus 80 degrees of tilt, plus or minus 90 degrees of swivel, and full 360 degree rotation let you flip a panel to portrait for code or…
SpecPicks Verdict
SpecPicks scored Bracwiser Monitor Mount Single Fully Adjustable Arm Monitor Arm Fits… using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Bracwiser's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fit my 32 inch monitor?
Yes, the arm is rated for screens from 13 to 32 inches diagonally. The limiting factor is usually weight, not size: your monitor must weigh 22 lbs or less and have 75x75mm or 100x100mm VESA holes.
Can I rotate the monitor to portrait orientation?
Yes. The mount offers 360 degree rotation at the VESA plate, plus or minus 80 degrees of tilt, and plus or minus 90 degrees of swivel, so you can turn the screen vertical and tilt it back to a comfortable angle.
Do I need to drill a hole in my desk?
Only if you choose the grommet base, which requires an existing or drilled hole at least 1.65 inches in diameter. The included C-clamp option needs no drilling and fits desk edges up to 3.86 inches thick.
Does it come with the screws and tools I need?
Yes. The mount ships with instructions and all accessories required for installation, including both the C-clamp and grommet mounting hardware.
How well does it hold up according to buyers?
Buyers frequently cite the steel arm construction and 22 lb load rating as the key specs when weighing it against heavier gas-spring arms.
Key Features
- Strong steel arm mounts screen conveniently free up desk space. Hold one 13-32" monitor with a max load capacity 22lbs.
- Fits monitors with 75x75mm or 100x100mm VESA size (distance of 4 mounting holes on the back of the monitor).
- Feature +/-80 tilt, +/-90 swivel and 360 rotation, 1200mm height adjustable for optimum viewing angle.
- Two installation methods: c-clamp and grommet base provide you different options in different circumstances. C-clamp can be mounted to desk up to 3.86inch thickness. Grommet base requires holes with at least 1.65inch diameter.
- Comes complete with instructions plus all accessories needed for simple installation.
Full Specifications
| Brand | Bracwiser |
|---|---|
| Color | Black |
| Material | Alloy Steel |
| Mounting Type | Tabletop Mount |
| Movement Type | Articulating |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 80 degrees |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 13 inches |
Ready to buy?
Bracwiser Monitor Mount Single Fully Adjustable Arm Monitor Arm Fits One Screen 13-32 inch 22lbs for Computer Screen 13 15 17 19 20 22 23 24 26 27 30 32 inch VESA 75 100 (MD71221) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- KOORUI 27" 4K vs Samsung Odyssey 27" 4K for PS5 and PC Gaming
- Ryzen AI Max 395 Mini PC: Specs, Performance & Buying Guide
- Best CPU Cooler for AM4 Ryzen Overclocking (2026 Edition)
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- DualSense vs 8BitDo Pro 2 vs GameSir G7 SE: Best PC Controller in 2026
- LoRA Fine-Tuning Small LLMs on an RTX 3060 12GB in 2026
- Logitech G920 vs HORI Racing Wheel: Best Beginner Sim Setup (2026)
- Raspberry Pi 5 IOMMU Support Is Landing in the Mainline Linux Kernel
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
- Nemotron 3 Ultra vs MiniMax M3: Best Open Model for a 12GB Rig
- Moving Files On and Off a Retro PC: CompactFlash + IDE-to-USB
- Best Gaming Monitor for PS5 & High-Refresh PC Gaming (2026)
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- Retro Gear Cables Melting Into Cases: Causes and Fixes
- Raspberry Pi 4 8GB vs a Used Mini PC for a 2026 Beginner Homelab
- Logitech G29 / G920 Not Detected on Windows 11: Step-by-Step Driver Fix Guide (2026)
- Best Streaming Gear for New Creators in 2026
- IPEX-LLM + Ollama in Docker on Intel Arc: The 2026 Setup Guide
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Hugging Face Says an AI Agent Breached Its Infrastructure
- Raspberry Pi Projects for College Students: 2026 Guide
- Reve 2.0 Debuts at #2 for Text-to-Image: Can You Run Local Image Gen on an RTX 3060?
- AMD Ryzen AI Mini PC vs a DIY RTX 3060 Build for Local LLMs
- Local LLM Setup in 2026: AMD GPU Guide by Model Size
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090