Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans
Bottom line: The Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans: 8-port 4-pin hub controls up to 8 fans from one header; main trade-off: no 12V 4-pin RGB support; wrong plug can damage gear.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 8-port 4-pin hub controls up to 8 fans from one header
- ✓ Syncs 5V 3-pin ARGB fans and light bars in one chain
- ✓ PWM speed regulation with fan-speed reading via red port
- ✓ SATA-powered for stable output under high fan load
- ✓ Dual mounting: strong 3M paste plus magnetic suction
Cons
- ✗ No 12V 4-pin RGB support; wrong plug can damage gear
- ✗ Only the single fan in the red port reports RPM
- ✗ Requires a free SATA power lead from the PSU
- ✗ No bundled software; relies on motherboard ARGB header
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "8-port 4-pin hub controls up to 8 fans from one header"; the main trade-off is "No 12V 4-pin RGB support; wrong plug can damage gear". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R & D product lines include: CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
- Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.
- Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
- Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
- Small body, large capacity. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.)
Full Specifications
| Brand | Thermalright |
|---|---|
| Model | FAN Hub-d6 |
| Voltage | 12 volts_of_direct_current |
| Wattage | 2.5 watts |
| Material | ABS Plastic |
| Unit Count | 1 Count |
| Part Number | FAN Hub-d6 |
| Compatibility | PC |
| Material Type | ABS Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Desktop |
| Power Connector Type | 4-Pin |
| Item Dimensions L x W x H | 5.51"L x 2.52"W x 0.63"H |
| Full listing title | Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub, Strong Paste+Magnetic Suction (12V 4-pin RGB is not Supported) |
Ready to buy?
Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub, Strong Paste+Magnetic Suction (12V 4-pin RGB is not Supported) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSD for Gaming and Everyday Upgrades in 2026
- Can a 12GB RTX 3060 Run a 70B LLM? The Offload Reality Check
- Best Raspberry Pi Alternative for AI Inference in 2026: When to Step Up
- Gemma 4 31B-IT on a 12GB RTX 3060: What Fits, What Offloads, How Fast
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- Best Game Controller for PC and PS5 in 2026
- Building a Silent Windows 98 Gaming PC in 2026: The Full Parts List
- Best SSD for Steam Deck OLED Expansion in 2026: SATA Adapter vs M.2 2230
- Best PlayStation Controller for PC Gaming in 2026
- Best Standing Desk for a Dual-Monitor AI Workstation in 2026
- Free Retro Game Emulator Online: 2026 Browser Guide
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
- Best Streaming Gear for New Streamers in 2026: 5 Picks to Start On-Air
- OpenAI Codex 'Watch Once, Repeat Forever': What It Means for Local Coding Rigs
- PFlash on a Single RTX 3090: 10× Prefill Speedup at 128K Context vs llama.cpp
- Have Qwen Said Anything About Further Qwen 3.6 Models?
- Grok Imagine Video 1.5 Hits #2 — But Local Video Gen on an RTX 3060 Is Still Free
- Ryzen 7 5700X + RTX 3060 12GB: A Balanced 1440p Build in 2026
- Best GPU for Local LLMs in 2026: Why the RTX 3060 12GB Still Wins on Value
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- 8BitDo SN30 Pro on SNES Classic and Genesis Mini: Bluetooth Setup Guide
- Best Budget PC Gaming Peripherals in 2026: 5 Picks That Punch Above Their Price
- AI-Driven Driver Install on Win98 + WinXP: Vision-LLM Walks the Installer (Field Report)
- AMD Ryzen AI Halo Review Roundup: AMD Builds Its Own DGX Spark Rival
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090