Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans
Bottom line: The Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans ($9.27 on Amazon as of 2026-11-22 05:45 UTC): 8-port 4-pin hub controls up to 8 fan groups from one header; main trade-off: no 12V 4-pin RGB support; wrong insertion can damage devices.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 8-port 4-pin hub controls up to 8 fan groups from one header
- ✓ 5V 3-pin ARGB sync for fans and light bars via motherboard
- ✓ SATA-powered for stable output under high fan load
- ✓ PWM speed regulation with fan RPM reading on red port
- ✓ Dual-sided sticker plus magnet for flexible chassis mounting
Cons
- ✗ No 12V 4-pin RGB support; wrong insertion can damage devices
- ✗ RPM reading limited to the single fan in the red interface
- ✗ 5V 3-pin ARGB only; older 12V RGB gear left out
- ✗ Adhesive mounting can weaken over time inside warm cases
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "8-port 4-pin hub controls up to 8 fan groups from one header"; the main trade-off is "No 12V 4-pin RGB support; wrong insertion can damage devices". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R & D product lines include: CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
- Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.
- Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
- Support fan speed reading and PWM Fan regulation. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
- Small body, large capacity. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment. (Note: the + 12V 4Pin RGB interface device is not supported! Do not insert! Please pay attention to the arrow marked on the ARGB equipment plug and insert it in the direction of 5V. If the insertion direction is wrong, there is a risk of damaging the equipment.)
Full Specifications
| Brand | Thermalright |
|---|---|
| Model | FAN Hub-d6 |
| Voltage | 12 Volts (DC) |
| Wattage | 2.5 watts |
| Material | ABS Plastic |
| Unit Count | 1.0 Count |
| Part Number | FAN Hub-d6 |
| Compatibility | PC |
| Material Type | ABS Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Desktop |
| Power Connector Type | 4-Pin |
| Item Dimensions L x W x H | 5.51"L x 2.52"W x 0.63"H |
| Full listing title | Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub, Strong Paste+Magnetic Suction (12V 4-pin RGB is not Supported) |
Ready to buy?
Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub, Strong Paste+Magnetic Suction (12V 4-pin RGB is not Supported) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- GTX 1660 VRAM: Why 8GB Doesn't Exist (Real Specs)
- Best Gaming PC Build Components for 2026
- Proprietary Models See Your Business: The Case for a Local Ryzen + RTX 3060 Rig
- Best GPU for 1440p Esports at 240Hz in 2026
- vLLM 0.21 Adds Intel Arc Support: The Local Stack Widens
- Intel Arc Stable Diffusion WebUI: Setup & Performance 2026
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- Best CPU for the MSI RTX 3060 12GB: 5600G vs 5700X vs 5800X
- Silent Cooling for a Retro Sleeper PC: Fitting a Modern Quiet Fan to a Vintage Case
- GLM-5.2 on an RTX 3060 12GB: Can a Budget Card Run Long-Horizon Agents?
- Best CPU for a Local-LLM Homelab Under $300 in 2026
- Hyperscalers May Soon Outrun Their Cash Flow on AI Buildout
- Best SSD for a Retro PC Build: CompactFlash vs SATA in 2026
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
- Gemini Intelligence Hardware Requirements: What Google's Stack Tells Us About Local Inference
- Mystery N64 Cartridge Found in the Woods Boots Up
- 3dfx Voodoo3 3000 PCI vs Voodoo5 5500 AGP: Win98 Performance Synthesis (2026)
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Streaming and Podcasting in 2026
- Ollama vs LM Studio MLX in 2026: Which Local Runner Wins?
- Voodoo3 3000 PCI Install Guide for Win98 SE in 2026
- Best CPU for Gaming in 2026: Intel vs AMD Showdown
- GeForce 4 Ti 4600 Won't Boot Past POST: AGP Voltage and BIOS Field Guide
- RX 9060 XT 16GB vs 8GB: Which One to Buy (Benchmarks)
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Gaming
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090